module.xml

<?xml version="1.0" encoding="utf-8"?>
<!--@POSTPROC: ./proc/post.sh-->
<module>

<rels>
  <!--Phase-to-Locus relationship(s)-->
  <RelationshipElement name="Phase - Locus" type="hierarchical">
    <description>A 1-to-n relationship between the parent and its children, respectively.</description>
    <parent>{includes}</parent>
    <child>{is_included_in}</child>
  </RelationshipElement>

  <!--Phase-to-Phase relationship(s)-->
  <!--IMPORTANT: These must not contain dashes!-->
  <RelationshipElement name="Lying against" type="bidirectional">
    <description/>
  </RelationshipElement>
  <RelationshipElement name="Incorporated" type="bidirectional">
    <description/>
  </RelationshipElement>
  <RelationshipElement name="Same as" type="bidirectional">
    <description/>
  </RelationshipElement>
  <RelationshipElement name="Includes/Merged with" type="bidirectional">
    <description/>
  </RelationshipElement>

  <RelationshipElement name="{cuts}" type="hierarchical">
    <description>Implements a cuts-cutby for loci.</description>
    <parent>{cuts}</parent>
    <child>{cut_by}</child>
  </RelationshipElement>
  <RelationshipElement name="Abutts" type="hierarchical">
    <description>Implements a Butts-Butted by for loci.</description>
    <parent>Abutts</parent>
    <child>Abutted by</child>
  </RelationshipElement>
  <RelationshipElement name="Above" type="hierarchical">
    <description>Implements a Butts-Butted by for loci.</description>
    <parent>Above</parent>
    <child>Below</child>
  </RelationshipElement>
  <RelationshipElement name="Sealed by" type="hierarchical">
    <description>Implements a Butts-Butted by for loci.</description>
    <parent>Sealed by</parent>
    <child>Seals</child>
  </RelationshipElement>
</rels>

<User f="nodata nolabel">
  <User_List>
    <Users t="dropdown" f="user"/>
    <Device_Code t="radio" f="persist" vp="Locus/Vars/Device_Code"/>
    <Login t="button" l="Control"/>
    <Module_Guide t="button" l="User/Help"/>
  </User_List>
  <Help>
    <Help t="webview" f="nolabel"/>
  </Help>
</User>

<Control f="nodata">
  <Site f="noscroll">
    Control
    <New_Square t="button" l="Square"/>
    <New_Diary t="button" l="Diary"/>
    <GPS_Diagnostics t="gpsdiag"/>
    <Choose_an_Existing_Site t="list" e="Square">
      Existing Squares
    </Choose_an_Existing_Site>
  </Site>
  <Next_IDs>
    <autonum/>
  </Next_IDs>
  <search>
    <!--The semantics of this element has been changed with @POSTPROC. A
         Select_User dropdown has been placed beside the Entity_List.

        This entails changes to ui_schema.xml, ui_logic.bsh and
        english.0.properties.
         -->
  </search>
</Control>

<Square>
  <fmt>{{Area}} {{Square_ID}}</fmt>
  <Square>
    <author/>
    <Area f="notnull"/>
    <Square_ID f="notnull"/>
    <Team_Members/>
    <Square_Dimensions>
      <!--@SOURCE: vocabs/trench-dimensions.xml-->
    </Square_Dimensions>
    <Grid_SW_Corner_Coordinates t="webview"/>
    <gps/>
    <X_Coordinate b="decimal"/>
    <Y_Coordinate b="decimal"/>
    <Excavation_Method t="checkbox" f="notnull">
      <desc>Enter details here about the method of archaeological excavation.</desc>
      <opts>
        <opt>Hand-pick
          <desc>Excavated by hand-pick.</desc>
        </opt>
        <opt>Trowel
          <desc>Excavated by trowel.</desc>
        </opt>
        <opt>Pick
          <desc>Excavated by pick.</desc>
        </opt>
        <opt>
          Shovel
          <desc>Excavated by shovel.</desc>
        </opt>
        <opt>Other
          <desc>Excavated by another method. Add details in Annotation field.</desc>
        </opt>
      </opts>
    </Excavation_Method>
    <timestamp>
      Date Opened
    </timestamp>
    <Set_Date_Closed t="button" l="Date_Closed">
      Set Date Closed...
    </Set_Date_Closed>
    <Date_Closed f="readonly"/>
    <Brief_Description/>
    <Your_Discussion/>
    <Attach_Sketch t="file"/>
    <Add_Square_Files t="button" lc="Square_Files"/>
    <Attached_Square_Files t="dropdown" ec="Square_Files"/>
  </Square>
  <Loci f="noscroll">
    <Create_New_Locus t="button" lc="Locus"/>
    <List_of_Existing_Loci t="list" ec="Locus"/>
  </Loci>
  <Phases f="noscroll">
    <Create_New_Phase t="button" lc="Phase"/>
    <List_of_Existing_Phases t="list" ec="Phase"/>
  </Phases>
  <Diaries f="noscroll">
    <Create_New_Diary t="button" lc="Diary"/>
    <List_of_Existing_Diaries t="list" ec="Diary"/>
  </Diaries>
  <Legacies f="noscroll">
    <Create_New_Legacy t="button" lc="Legacy"/>
    <List_of_Existing_Legacies t="list" ec="Legacy"/>
  </Legacies>
  <Vars f="hidden">
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Square>

<Date_Closed f="nodata">
  <Date_Closed>
    <Date_Closed b="date"/>
    <Set_Date_Closed t="button"/>
    <Cancel t="button"/>
  </Date_Closed>
</Date_Closed>

<Square_Files>
  <fmt>{{Area}} {{Square_ID}} {{File_Type}}</fmt>
  <Add_Square_Files>
    Square Files
    <Area i="Square/Square/Area">
    </Area>
    <Square_ID f="readonly notnull" i="Square/Square/Square_ID"/>
    <author f="readonly"/>
    <File_Type f="notnull">
      <opts>
        <opt>Plan</opt>
        <opt>Section</opt>
        <opt>Photo</opt>
        <opt>Other</opt>
      </opts>
    </File_Type>
    <File_Name/>
    <File_Comment/>
    <Add_Photo t="camera"/>
  </Add_Square_Files>
  <Vars f="hidden">
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Square_Files>

<Locus>
  <fmt>{{Area}} {{Square_ID}} {{Locus_ID}} {{Locus_Type}}</fmt>
  <desc>The physical result of any single action whether it leaves a positive or negative record within the stratigraphic sequence. (MoLAS 1994)</desc>
  <General>
    <cols>
      <author/>
      <Area i="Square/Square/Area"/>
      <Square_ID f="readonly" i="Square/Square/Square_ID">
        <!--The semantics of the autonum flag have been changed using
             @POSTPROC-->
      </Square_ID>
    </cols>
    <cols>
      <Locus_ID f="notnull autonum">
        <desc>Every archaeological locus (negative element (cut), deposit, structure, skeleton, artefact cluster) is given a unique 3 or 4 letter locus code. Each trench is designated with a separate letter which starts the code, so it is immediately obvious to which trench a locus belongs. For example locus HAA belongs to Trench H, locus MQP to Trench M etc.
        The loci are labelled consecutively in alphabetical order using the letters following the trench letter. For Trench H the first locus would be HAA, the second HAB, the third HAB and so on. In addition sets of letters can denote parts of trenches, buildings etc. E.g. HFs might denote loci from a specific building.
        Burial locus codes begin with the letter Z, followed by the trench letter. Hence burial ZHA is the first burial locus from trench H.
        Check with the trench supervisor who will assign the locus code from the central register.</desc>
      </Locus_ID>
    </cols>
    <Brief_Description>
      <desc>Enter a brief, clear name for the Locus eg 'House A - west wall'</desc>
    </Brief_Description>
    <Primary_Period>
      <!--@SOURCE: vocabs/period.xml-->
    </Primary_Period>
    <cols>
      <Grid_X b="decimal">
        <desc>The X coordinate on the SW corner of the locus.</desc>
      </Grid_X>
      <Grid_Y b="decimal">
        <desc>The Y coordinate on the SW corner of the locus.</desc>
      </Grid_Y>
    </cols>
    <cols>
      <col>
        <Date_Opened>
          <desc>Date on which the Locus was first excavated. This will automatically be set to the date on which the locus is recorded but can be edited using the keyboard.</desc>
        </Date_Opened>
        <Team_Members i="Square/Square/Team_Members">
          <desc>Initials of the excavators that have worked on the locus.</desc>
        </Team_Members>
      </col>
      <Excavation_Method t="checkbox" f="notnull">
        <desc>Enter details here about the method of archaeological excavation.</desc>
        <opts>
          <opt>Hand-pick
            <desc>Excavated by hand-pick.</desc>
          </opt>
          <opt>Trowel
            <desc>Excavated by trowel.</desc>
          </opt>
          <opt>Pick
            <desc>Excavated by pick.</desc>
          </opt>
          <opt>
            Shovel
            <desc>Excavated by shovel.</desc>
          </opt>
          <opt>Other
            <desc>Excavated by another method. Add details in Annotation field.</desc>
          </opt>
        </opts>
      </Excavation_Method>
    </cols>
    <Contamination>
      <desc>The extent to which the locus has been contaminated.</desc>
      <opts>
        <opt>No Observation</opt>
        <opt>Primary</opt>
        <opt>Sealed</opt>
        <opt>Unsealed</opt>
        <opt>Disturbed</opt>
        <opt>Disturbed?</opt>
        <opt>Unstratified</opt>
      </opts>
    </Contamination>
    <Locus_Type>
      <desc>Describe the locus type by selecting an icon as defined below.
        When you have selected a locus type you can proceed to open the "Fill in locus type details" page. Note this page will not open unless you have selected a locus type.</desc>
      <opts>
        <opt p="gallery/Blanks/Trail.png">No Observation
        <desc>data not collected</desc></opt>
        <opt p="gallery/ContextType/Orange/Cut.png">Pit
        <desc>Any Locus which represents the removal of earlier deposit and thus forms a negative interface (cut) with another locus, such as a cut for a pit, burial, ditch, wall foundation or robber trench.</desc></opt>
        <opt p="gallery/ContextType/Orange/Deposit.png">Fill
        <desc>Any Locus with deposited sediment and soil, such as floor layers, pit and grave fills, hearth fills and natural sediments.</desc></opt>
        <opt p="gallery/ContextType/Orange/Natural.png">Surface
        <desc>Any Locus with deposited sediment and soil, such as floor layers, pit and grave fills, hearth fills and natural sediments.</desc></opt>
        <opt p="gallery/ContextType/Orange/Structure.png">Architecture
        <desc>Any Locus consisting of deliberately constructed structural element, independent of a Negative Element (i.e. cut, such as a wall or a hearth).</desc></opt>
        <opt p="gallery/ContextType/Orange/Skeleton.png">Skeleton
        <desc>Human skeletal remains.</desc></opt>
      </opts>
    </Locus_Type>
    <Fill_in_Locus_Type_Details t="button"/>
    <cols>
      <Photo_of_Plan t="camera"/>
      <Photo_of_Section t="camera"/>
    </cols>
    <cols>
      <Date_Closed>
        <desc>The date excavation of the Locus ended and it was closed. Press the 'Add Date Closed' button to insert today's date.</desc>
      </Date_Closed>
      <Add_Date_Closed t="button"/>
    </cols>
  </General>
  <Measure>
    <cols>
      <Absolute_Height_Top_m f="notnull" b="decimal">
        Absolute Height Top (m)
        <desc>The highest elevation or 'starting level' recorded for that locus relative to the site grid.</desc>
      </Absolute_Height_Top_m>
      <Absolute_Height_Bottom_m f="notnull" b="decimal">
        Absolute Height Bottom (m)
        <desc>The lowest elevation recorded for that locus relative to the site grid.</desc>
      </Absolute_Height_Bottom_m>
    </cols>
    <cols>
      <Measure_Length f="notnull" b="decimal">
        Length (m)
        <desc>Longest dimension in metres.</desc>
      </Measure_Length>
      <Measure_Width f="notnull" b="decimal">
        Width (m)
        <desc>Width or diameter in metres.</desc>
      </Measure_Width>
      <Measure_Depth f="notnull" b="decimal">
        Depth (m)
        <desc>Depth or Height in metres.</desc>
      </Measure_Depth>
    </cols>
    <cols>
      <col>
        <NW_Top_Height b="decimal"/>
        <SW_Top_Height b="decimal"/>
        <Center_Top_Height b="decimal"/>
      </col>
      <col>
        <NE_Top_Height b="decimal"/>
        <SE_Top_Height b="decimal"/>
      </col>
    </cols>
    <cols>
      <col>
        <NW_Bottom_Height b="decimal"/>
        <SW_Bottom_Height b="decimal"/>
        <Center_Bottom_Height b="decimal"/>
      </col>
      <col>
        <NE_Bottom_Height b="decimal"/>
        <SE_Bottom_Height b="decimal"/>
      </col>
    </cols>
    <Add_Daily_Final_Height t="button" lc="Daily_Final_Height"/>
    <Existing_Daily_Final_Heights t="dropdown" ec="Daily_Final_Height"/>
  </Measure>
  <Cut>
    Pit
    <Cut_Your_Interpretation>
      Your Interpretation
      <desc>Your interpretation of the likely function of the Locus using standardised definitions.</desc>
      <opts>
        <opt>No Observation</opt>
        <opt>Indeterminate</opt>
        <opt>Animal/Plant hole</opt>
        <opt>
          Pit
          <opt>Stone-lined</opt>
          <opt>Plastered</opt>
          <opt>No Lining</opt>
          <opt>Other
            <desc>Function not elsewhere described. Provide details in Annotation field.</desc>
          </opt>
        </opt>
        <opt>Hearth/Fire pit</opt>
      </opts>
    </Cut_Your_Interpretation>
    <cols>
      <Shape_in_Plan f="notnull">
        <desc>Describe the shape of the negative element/cut viewed from above.</desc>
        <opts>
          <opt>No Observation <desc>data not collected</desc></opt>
          <opt>Circular <desc>Round</desc></opt>
          <opt>Linear <desc>Straight sided but not square or rectangular.</desc></opt>
          <opt>Ovoid <desc>Oval or elliptical.</desc></opt>
          <opt>Rectangular <desc>Two sides longer than the other.</desc></opt>
          <opt>Semi-Circular <desc>Half circle.</desc></opt>
          <opt>Square <desc>Equal on four sides.</desc></opt>
          <opt>Sub-Circular <desc>Nearly circular.</desc></opt>
          <opt>Sub-rectangular <desc>Nearly rectangular in shape.</desc></opt>
          <opt>Irregular</opt>
        </opts>
      </Shape_in_Plan>
      <Shape_of_Cut_-_Note>
        <desc>Additional notes about the shape of the cut.</desc>
      </Shape_of_Cut_-_Note>
    </cols>
    <Shape_of_Corners t="radio" f="notnull">
      <desc>Describe the shape of any visible corners of the negative element/cut.</desc>
      <opts>
        <opt>Other <desc>Other shapes</desc></opt>
        <opt>Rounded <desc>Rounded corners.</desc></opt>
        <opt>Square <desc>Sharp perpendicular corners.</desc></opt>
      </opts>
    </Shape_of_Corners>
    <Break_of_Slope_-_Top t="radio" f="notnull">
      <desc>The degree with which the top surface of the edge of the cut breaks into the sides.</desc>
      <opts>
        <opt>Gradual <desc>Some rounding to the top.</desc></opt>
        <opt>Not perceptible <desc>Well-rounded; there is no perceptible difference between the sides of the cut and the surface into which it protrudes.</desc></opt>
        <opt>Sharp <desc>Clear sharp slope, almost right-angled.</desc></opt>
        <opt>Shallow <desc>Gentle slope less than 45 degrees.</desc></opt>
      </opts>
    </Break_of_Slope_-_Top>
    <Break_of_Slope_-_Base t="radio" f="notnull">
      <desc>The degree with which the top surface of the edge of the cut breaks into the sides.</desc>
      <opts>
        <opt>Gradual <desc>Some rounding to the top.</desc></opt>
        <opt>Not perceptible <desc>Well-rounded; there is no perceptible difference between the sides of the cut and the surface into which it protrudes.</desc></opt>
        <opt>Sharp <desc>Clear sharp slope, almost right-angled.</desc></opt>
        <opt>Shallow <desc>Gentle slope less than 45 degrees.</desc></opt>
      </opts>
    </Break_of_Slope_-_Base>
    <cols>
      <Sides_of_Cut f="notnull">
        <desc>Describe the shape of the cut as seen in cross section.</desc>
        <opts>
          <opt>Vertical<desc>Sides are vertical</desc></opt>
          <opt>Convex</opt>
          <opt>Concave</opt>
          <opt>Stepped</opt>
        </opts>
      </Sides_of_Cut>
      <Shape_of_Base f="notnull">
        <desc>The shape of the base of the cut in profile.</desc>
        <opts>
          <opt>No Observation <desc>data not collected</desc></opt>
          <opt>Concave </opt>
          <opt>Flat </opt>
          <opt>Pointed </opt>
          <opt>Sloping </opt>
          <opt>Tapered
            <opt>Blunt</opt>
            <opt>Sharp</opt>
          </opt>
          <opt>Uneven</opt>
        </opts>
      </Shape_of_Base>
    </cols>
    <Orientation f="notnull">
      <desc>Orientation of linear cuts eg N-S.</desc>
      <opts>
        <opt>No Observation <desc>data not collected</desc></opt>
        <opt>E-W <desc>Oriented East to West.</desc></opt>
        <opt>N-S <desc>Oriented North to South.</desc></opt>
        <opt>NE-SW <desc>Oriented North-east to South-west.</desc></opt>
        <opt>NW-SE <desc>Oriented North-west to South-east.</desc></opt>
      </opts>
    </Orientation>
    <Orientation_Degree f="notnull" b="decimal"/>
    <Inclination_of_axis f="notnull">
      <desc>Inclination of the axis of post- and stakeholes.</desc>
      <opts>
        <opt>No Observation <desc>data not collected</desc></opt>
        <opt>Vertical </opt>
        <opt>Between 45 and 90 degrees from horizontal </opt>
        <opt>45 degrees </opt>
        <opt>Less than 45 degrees from horizontal </opt>
      </opts>
    </Inclination_of_axis>
    <Truncation/>
  </Cut>
  <Construction>
    Architecture
    <Architecture_Type>
      <opts>
        <opt>No Observation</opt>
        <opt>Robber Trench</opt>
        <opt>Foundation Trench</opt>
        <opt>Wall</opt>
        <opt>Pit</opt>
        <opt>Burial</opt>
        <opt>Hearth</opt>
        <opt>Kiln</opt>
        <opt>Installation</opt>
        <opt>Other</opt>
      </opts>
    </Architecture_Type>
    <Your_Description/>
    <Your_Interpretation/>
    <Discussion/>
    <Length b="decimal">
      Length (m)
    </Length>
    <Width b="decimal">
      Width (m)
    </Width>
    <cols>
      <Top_Depth b="decimal">
        Top Depth (m)
      </Top_Depth>
      <Bottom_Depth b="decimal">
        Bottom Depth (m)
      </Bottom_Depth>
    </cols>
    <Mid_X b="decimal"/>
    <Mid_Y b="decimal"/>
    <Sorting b="decimal"/>
    <Notes/>
    <Plans/>
    <Section_Numbers/>
  </Construction>
  <Surface>
    <Surface_Type>
      Type
      <opts>
        <opt>Beaten Earth</opt>
        <opt>Plastered</opt>
        <opt>Cobblestone</opt>
        <opt>Other</opt>
      </opts>
    </Surface_Type>
    <Extent_Length b="decimal">
      Extent Length (cm)
    </Extent_Length>
    <Extend_Width b="decimal">
      Extent Width (cm)
    </Extend_Width>
    <Thickness_max b="decimal">
      Thickness max (cm)
    </Thickness_max>
    <Composition_Description>
      <opts>
        <opt>
          Compaction
          <opt>Soft</opt>
          <opt>Medium</opt>
          <opt>Hard</opt>
        </opt>
        <opt>Inclusions
          <opt>Organic Material</opt>
          <opt>Charcoal</opt>
          <opt>Stone Chips</opt>
        </opt>
      </opts>
    </Composition_Description>
  </Surface>
  <Deposit>
    Fill
    <Deposit_Your_Interpretation f="notnull">
      Your Interpretation
      <desc>Your interpretation of the likely function of the locus.</desc>
      <opts>
        <opt>No Observation</opt>
        <opt>Indeterminate
        <desc>You are unable to make an assessment of possible function.</desc></opt>
        <opt>Makeup/Levelling
        <desc>Material laid down to level or raise an area for constructional purposes or other activities.</desc></opt>
        <opt>Dump
        <desc>Material probably dumped as a result of other activity e.g. material removed from cuts or other constructional or destructional activity.</desc></opt>
        <opt>Burial
        <desc>A fill or other deposit associated with a skeleton and forming part of a burial feature.</desc></opt>
        <opt>Structural Debris
        <desc>Material derived from collapse of a wall, roof or other structure</desc></opt>
        <opt>Collapse
        <desc>Material derived from collapse of a wall, roof or other structure</desc></opt>
        <opt>Naturally Derived
        <desc>A deposit partly or wholly accumulating through natural sedimentary processes, such as water or wind deposition.</desc></opt>
        <opt>Erosional Products
        <desc>Material deriving from the erosion of earlier archaeological sediments.</desc></opt>
        <opt>Artifact Cluster
        <desc>A distinct concentration of artifacts or ecofacts. Make sure you record its xyz coordinates centre and edges.</desc></opt>
        <opt>Ash/Charcoal
        <desc>A deposit consisting largely of carbonized/charred plant material and/or ash</desc></opt>
        <opt>Arbitrary
        <desc>This applies to artificial loci excavated for excavational convenience eg section cleaning material whose precise provenience is unclear. Does not include arbitrary spits or spatial units deliberately excavated for finer control of horizontal and vert</desc></opt>
        <opt>Animal/Plant
        <desc>Deposit derived from plant or animal activity</desc></opt>
        <opt>Other
        <desc>Function not elsewhere described. Provide details in Annotation field.</desc></opt>
      </opts>
    </Deposit_Your_Interpretation>
    <Texture f="notnull">
      <desc>Describe the compaction of the sediments in the Locus.</desc>
      <opts>
        <opt>No Observation</opt>
        <opt>Loose
        <desc>Soft and uncemented/bonded</desc></opt>
        <opt>Compact
        <desc>Firm and relatively hard</desc></opt>
        <opt>Medium Compact
        <desc>Somewhere between loose and compact.</desc></opt>
        <opt>Concrete
        <desc>Rock hard resistant to trowelling.</desc></opt>
        <opt>Friable
        <desc>Deposit disintegrates into small particles under pressure.</desc></opt>
        <opt>Crumbly
        <desc>Deposit disintegrates into lumps under pressure.</desc></opt>
      </opts>
    </Texture>
    <Texture_Description>
      <desc>Description of the compaction of soil including changes throughout the deposit. Eg "Varies from loose to compact."</desc>
    </Texture_Description>
    <Soil_Particle_Sorting>
      <desc>Assessment of the frequency with which particles of the same size occur.</desc>
      <opts>
        <opt>Boulder
          <desc>&gt;256mm</desc>
        </opt>
        <opt>Cobble
          <desc>64-256m</desc>
        </opt>
        <opt>Very Coarse Gravel
          <desc>32-64mm</desc>
        </opt>
        <opt>Coarse Gravel
          <desc>16-32mm</desc>
        </opt>
        <opt>Medium Gravel
          <desc>8-16mm</desc>
        </opt>
        <opt>Fine Gravel
          <desc>4-8mm</desc>
        </opt>
        <opt>Very Fine Gravel
          <desc>2-4mm</desc>
        </opt>
        <opt>Very Coarse Sand
          <desc>1-2mm</desc>
        </opt>
        <opt>Coarse Sand
          <desc>0.5-1mm</desc>
        </opt>
        <opt>Medium Sand
          <desc>0.25-0.5mm</desc>
        </opt>
        <opt>Fine Sand
          <desc>125-250µm</desc>
        </opt>
        <opt>Very Fine Sand
          <desc>62.5-125µm</desc>
        </opt>
      </opts>
    </Soil_Particle_Sorting>
    <cols>
      <Material f="notnull">
        <desc>The type of sediment, eg clay, silt, sand and loam. Use the Material Helper or a Soil Sediment diagram for assisance.</desc>
        <opts>
          <opt>No Observation
          <desc>No Observation. Use the Texture helper to prefil this.</desc></opt>
          <opt>Sand
          <desc>A sand has a loose gritty feel and does not stick together. Individual sand grains can be seen or felt. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Loamy Sand
          <desc>In a loamy sand particles barely stick together and a moulded piece of soil just holds its shape. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Silty Clay Loam
          <desc>A silty clay loam is like a clay loam but silty as well and smooth to the touch. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Clay Loam
          <desc>More easily moulded into a shape than a loam a clay loam rolls out to a thin ribbon between the palms while a loam will break-up. When dry a clay loam will form a lump but is not as tough to break as a clay.(VDEPI 2009: AG0058)</desc></opt>
          <opt>Sandy Clay Loam
          <desc>A sandy clay loam is like a clay loam but sand grains can be felt (and heard - see Sandy Loam) (VDEPI 2009: AG0058)</desc></opt>
          <opt>Silt Loam
          <desc>A silty loam is like a loam but has a smooth silky feel when a moist sample is pushed between the index finger and thumb. On drying a sample can form a hard lump but this may be broken by hand. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Loam
          <desc>A loam breaks into crumbs but will tend to stick together. Sand grains cannot be felt in a moist sample which when squeezed will retain its shape when handled freely. Loams are usually soft to the feel. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Sandy Loam
          <desc>A sandy loam sticks together more than a loamy sand but can be easily broken. Individual sand grains can be felt and heard if a wet sample is rubbed between the index finger and thumb and held close to the ear. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Silty Clay
          <desc>A silty clay is like a clay but smoother. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Clay
          <desc>Clays are tough and can be moulded into shapes when moist. Clays form a long flexible ribbon when rubbed between the palms and the ribbon can often be bent into a U shape without breaking. Clays dry into very hard clods. (VDEPI 2009: AG0058)</desc></opt>
          <opt>Sandy Clay
          <desc>A sandy clay is like a clay but sand grains can be felt (and heard - see Sandy Loam). (VDEPI 2009: AG0058)</desc></opt>
          <opt>Silt
          <desc>Silt.</desc></opt>
          <opt>Sandy Silt
          <desc>Sandy silt.</desc></opt>
          <opt>Other
          <desc>Other: describe in Annotation.</desc></opt>
        </opts>
      </Material>
      <Material_Helper t="button" l="Locus/Material_Helper"/>
    </cols>
    <Soil_Colour>
      <desc>Broad colour  description of the soil, eg 'mid greyish brown'.
      </desc>
    </Soil_Colour>
    <Add_Munsel_Color t="button" lc="Soil_Munsel_Color"/>
    <Munsel_Colors t="dropdown" ec="Soil_Munsel_Color"/>
    <Deposit_Structure>
      <opts>
        <opt>No Observation</opt>
        <opt>Homogenous</opt>
        <opt>Heterogenous</opt>
        <opt>Laminated</opt>
        <opt>Compact laminated</opt>
      </opts>
    </Deposit_Structure>
    <Deposit_Bedding>
      Bedding
      <desc>Describes the base of the deposit</desc>
      <opts>
        <opt>No Observation</opt>
        <opt>Horizontal
        <desc>Horizontal.</desc></opt>
        <opt>Oblique steep
        <desc>Steep slope.</desc></opt>
        <opt>Oblique shallow
        <desc>Shallow slope.</desc></opt>
        <opt>Uneven
        <desc>Mix of horizontal, oblique and undulating - make sure you describe this</desc></opt>
      </opts>
    </Deposit_Bedding>
    <cols>
      <Sterile t="radio">
        <desc>Whether or not the deposit is sterile, ie contains no artefacts</desc>
        <opts>
          <opt>Yes
          <desc>Deposit is sterile</desc></opt>
          <opt>No
          <desc>Object is not sterile</desc></opt>
        </opts>
      </Sterile>
      <Deposit_Inclusions f="notnull">
        <desc>Enter a brief description of inclusions (eg stone flecks artefacts).</desc>
      </Deposit_Inclusions>
    </cols>
    <Add_New_Sediment_Aggregate t="button" lc="Sediment_Aggregate">
      Add New Sediment/Aggregate
    </Add_New_Sediment_Aggregate>
    <Associated_Sediment_Aggregates t="dropdown" ec="Sediment_Aggregate">
      Associated Sediment/Aggregates
    </Associated_Sediment_Aggregates>
  </Deposit>
  <Skeleton>
    <Location/>
    <Skeleton_Dimensions>
      Dimensions
      <desc>Record the approximate extent of the skeletal remains (in meters or millimetres only) and the axis of measurement. Detailed dimensions can be taken from the plan.</desc>
    </Skeleton_Dimensions>
    <cols>
      <Skeleton_Head f="notnull">
        Head
        <desc>Which way up the head faces and/or points</desc>
      </Skeleton_Head>
      <Skeleton_Body f="notnull">
        Body
        <desc>Describe the attitude of the body, whether it is extended, crouched, flexed, supine (front up), prone (face down) and the orientation.</desc>
      </Skeleton_Body>
    </cols>
    <cols>
      <Skeleton_Left_Arm f="notnull">
        Left Arm and Hand Location
        <desc>Record whether left arm is straight or flexed, is along the side of the body, over the chest or on the pelvis, and the position of the hand.</desc>
      </Skeleton_Left_Arm>
      <Skeleton_Right_Arm f="notnull">
        Right Arm and Hand Location
        <desc>Record whether right arm is straight or flexed, is along the side of the body, over the chest or on the pelvis, and the position of the hand.</desc>
      </Skeleton_Right_Arm>
    </cols>
    <cols>
      <Skeleton_Left_Leg f="notnull">
        Left Leg and Foot Location
        <desc>Record whether the leg is straight or bent, crossed left over right or right over left and the position of the foot</desc>
      </Skeleton_Left_Leg>
      <Skeleton_Right_Leg f="notnull">
        Right Leg and Foot Location
        <desc>Record whether the leg is straight or bent, crossed left over right or right over left and the position of the foot</desc>
      </Skeleton_Right_Leg>
    </cols>
    <Skeleton_Condition f="notnull">
      Condition
      <desc>Describe the general condition of the skeleton and any comments on articulation. Any degeneration of bone in situ is important to record as well as accidental damage during excavation and lifting. Record disturbances through later activity or animal/root activity as well as damage due to stone pressure on the bones. It is important to note whether the patellae, hyoid, phalanges, basi-occipital etc are present or not, and their location, as this may give an indication of the state of the body at the time of interment.</desc>
    </Skeleton_Condition>
    <Skeleton_Surface_Modifications>
      Surface Modifications
      <desc>Note any cut marks, evidence of stains and/or colour during the course of the excavation, burning, chewing marks, root activity etc.</desc>
    </Skeleton_Surface_Modifications>
    <Skeleton_Environment>
      Condition and Weather
      <desc>The physical environment at the time of excavation may affect the state of the bone therefore it is important to note the weather and conditions you are working in.</desc>
    </Skeleton_Environment>
    <Skeleton_Days_Exposed b="decimal">
      Number of Days Exposed
      <desc>It is important to excavate skeletal remains as quickly as possible as the state of the bone will change during exposure. Any conditional change should also be noted. Excavate as quickly as possible because the bones will degrade rapidly.</desc>
    </Skeleton_Days_Exposed>
    <cols>
      <Target_A_X f="notnull" b="decimal">
        Target A:X
        <desc>The X coordinate of Target A. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_A_X>
      <Target_A_Y f="notnull" b="decimal">
        Target A:Y
        <desc>The Y coordinate of Target A. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_A_Y>
      <Target_A_Z f="notnull" b="decimal">
        Target A:Z
        <desc>The Z coordinate of Target A. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_A_Z>
    </cols>
    <cols>
      <Target_B_X b="decimal">
        Target B:X
        <desc>The X coordinate of Target B. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_B_X>
      <Target_B_Y b="decimal">
        Target B:Y
        <desc>The Y coordinate of Target B. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_B_Y>
      <Target_B_Z b="decimal">
        Target B:Z
        <desc>The Z coordinate of Target B. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_B_Z>
    </cols>
    <cols>
      <Target_C_X b="decimal">
        Target C:X
        <desc>The X coordinate of Target C. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_C_X>
      <Target_C_Y b="decimal">
        Target C:Y
        <desc>The Y coordinate of Target C. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_C_Y>
      <Target_C_Z b="decimal">
        Target C:Z
        <desc>The Z coordinate of Target C. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_C_Z>
    </cols>
    <cols>
      <Target_D_X b="decimal">
        Target D:X
        <desc>The X coordinate of Target D. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_D_X>
      <Target_D_Y b="decimal">
        Target D:Y
        <desc>The Y coordinate of Target D. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_D_Y>
      <Target_D_Z b="decimal">
        Target D:Z
        <desc>The Z coordinate of Target D. Targets are white-painted, large-headed nails used to rectify photographs.</desc>
      </Target_D_Z>
    </cols>
    <Skeleton_Notes/>
  </Skeleton>
  <Int>
    Interpretation
    <Your_description f="notnull">
      Your Description
      <desc>Enter a verbal description of the Locus, including its form, loci, relationship to other Loci and any other relevant information. This is the main place to record all other descriptive information that may be treated briefly or not covered elsewhere, including signs of disturbance  by burrowing animals etc.</desc>
    </Your_description>
    <Your_Discussion f="notnull">
      <desc>Enter an interpretation of the function of the Locus and its place in the stratigraphical sequence.</desc>
    </Your_Discussion>
  </Int>
  <Relationships f="noscroll">
    <Create_Relationships_to_This_Locus t="button" l="Relationship"/>
    <cols>
      <Existing_Relationships_to_This_Locus t="list" f="nodata"/>
      <col>
        <Selected_Relationship t="webview"/>
        <Load_Related_Locus t="button"/>
        <Delete_Relationship t="button"/>
      </col>
    </cols>
  </Relationships>
  <Pottery_Baskets f="noscroll">
    <Add_Pottery_Basket t="button" lc="Pottery_Basket"/>
    <List_of_Related_Pottery_Baskets t="list" ec="Pottery_Basket"/>
  </Pottery_Baskets>
  <Add>
    <Photo t="camera">
      <desc>Use this button to take a photo of the locus using the camera on the tablet. Use a scale in the photo</desc>
    </Photo>
    <Attach_File t="file"/>
    <View_Attached_Files t="viewfiles"/>
    <Add_Photograph_Log t="button" lc="Photograph_Log"/>
    <Select_a_Photograph_Log t="dropdown" ec="Photograph_Log"/>
  </Add>
  <Material_Helper f="hidden">
    <Material_Helper>
      <desc>This helper is based on the standard flow chart for determining soil texture. Start by taking 25g of soil and placing it in your palm. Select each option and follow the prompts for TASKS (like roll ribbon) until you get a result, eg 'silty loam'. Then click the 'Update' button to have that value pasted onto your Locus record.</desc>
      <opts>
        <opt>Soil does NOT remain in ball when squeezed
        <desc>Place approximately 25 g soil in palm. Add water dropwise and knead the soil to break down all aggregates. Soil is at the proper consistency when plastic and moldable like moist putty.</desc>
        <opt>Is too dry
        <desc>The soil sample is too dry.</desc>
        <opt>NO RESULT: Add more water and start again
        </opt></opt>
        <opt>Is too wet
        <desc>The soil sample is too wet.</desc>
        <opt>NO RESULT: Add dry soil and start again
        <desc>NO RESULT: add dry soil to soak up water</desc></opt></opt>
        <opt>NOT too wet nor too dry
        <desc>The soil is NOT too wet nor too dry.</desc>
        <opt>Sand
        <desc>A sand has a loose gritty feel and does not stick together. Individual sand grains can be seen or felt. (VDEPI 2009: AG0058)</desc></opt></opt></opt>
        <opt>Soil remains in ball when squeezed
        <desc>Place approximately 25 g soil in palm. Add water dropwise and knead the soil to break down all aggregates. Soil is at the proper consistency when plastic and moldable like moist putty.</desc>
        <opt>TASK: Roll ribbon
        <desc>Rub a ball of soil between thumb and forefinger to make a 'ribbon'</desc>
        <opt>Does NOT form a ribbon
        <desc>A 'ribbon' is NOT formed when a ball of soil is rubbed between thumb and forefinger.</desc>
        <opt>Loamy Sand
        <desc>In a loamy sand particles barely stick together and a moulded piece of soil just holds its shape. (VDEPI 2009: AG0058)</desc></opt></opt>
        <opt>Forms ribbon
        <desc>A 'ribbon' is formed when a ball of soil is rubbed between thumb and forefinger.</desc>
        <opt>Medium ribbon (2.5-5cm long)
        <desc>The ribbon formed when a ball of soil is rubbed between thumb and forefinger is between 2.5 and 5cm long.</desc>
        <opt>TASK: Wet soil and rub with forefinger
        <desc>Excessively wet a small pinch of soil in palm and rub with forefinger.</desc>
        <opt>Does NOT feel very gritty
        <desc>The wetted soil does NOT feel very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Feels very smooth
        <desc>The wetted soil feels very smooth when rubbed on the palm and with forefinger.</desc>
        <opt>Silty Clay Loam
        <desc>A silty clay loam is like a clay loam but silty as well and smooth to the touch. (VDEPI 2009: AG0058)</desc></opt></opt>
        <opt>Neither very gritty nor very smooth
        <desc>The wetted soil does NOT feel very smooth nor very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Clay Loam
        <desc>More easily moulded into a shape than a loam a clay loam rolls out to a thin ribbon between the palms while a loam will break-up. When dry a clay loam will form a lump but is not as tough to break as a clay.(VDEPI 2009: AG0058)</desc></opt></opt></opt>
        <opt>Feels very gritty
        <desc>The wetted soil feels very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Sandy Clay Loam
        <desc>A sandy clay loam is like a clay loam but sand grains can be felt (and heard - see Sandy Loam) (VDEPI 2009: AG0058)</desc></opt></opt></opt></opt>
        <opt>Strong ribbon
        <desc>The ribbon formed when a ball of soil is rubbed between thumb and forefinger is strong and over 5cm long.</desc>
        <opt>TASK: Wet soil and rub with forefinger
        <desc>Excessively wet a small pinch of soil in palm and rub with forefinger.</desc>
        <opt>Does NOT feel very gritty
        <desc>The wetted soil does NOT feel very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Feels very smooth
        <desc>The wetted soil feels very smooth when rubbed on the palm and with forefinger.</desc>
        <opt>Silty Clay
        <desc>A silty clay is like a clay but smoother. (VDEPI 2009: AG0058)</desc></opt></opt>
        <opt>Neither very gritty nor very smooth
        <desc>The wetted soil does NOT feel very smooth nor very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Clay
        <desc>Clays are tough and can be moulded into shapes when moist. Clays form a long flexible ribbon when rubbed between the palms and the ribbon can often be bent into a U shape without breaking. Clays dry into very hard clods. (VDEPI 2009: AG0058)</desc></opt></opt></opt>
        <opt>Feels very gritty
        <desc>The wetted soil feels very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Sandy Clay
        <desc>A sandy clay is like a clay but sand grains can be felt (and heard - see Sandy Loam). (VDEPI 2009: AG0058)</desc></opt></opt></opt></opt>
        <opt>Weak ribbon (less than 2.5cm long)
        <desc>The ribbon formed when a ball of soil is rubbed between thumb and forefinger is less than 2.5cm long.</desc>
        <opt>TASK: Wet soil and rub with forefinger
        <desc>Excessively wet a small pinch of soil in palm and rub with forefinger.</desc>
        <opt>Does NOT feel very gritty
        <desc>The wetted soil does NOT feel very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Feels very smooth
        <desc>The wetted soil feels very smooth when rubbed on the palm and with forefinger.</desc>
        <opt>Silt Loam
        <desc>A silty loam is like a loam but has a smooth silky feel when a moist sample is pushed between the index finger and thumb. On drying a sample can form a hard lump but this may be broken by hand. (VDEPI 2009: AG0058)</desc></opt></opt>
        <opt>Neither very gritty nor very smooth
        <desc>The wetted soil does NOT feel very smooth nor very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Loam
        <desc>A loam breaks into crumbs but will tend to stick together. Sand grains cannot be felt in a moist sample which when squeezed will retain its shape when handled freely. Loams are usually soft to the feel. (VDEPI 2009: AG0058)</desc></opt></opt></opt>
        <opt>Feels very gritty
        <desc>The wetted soil feels very gritty when rubbed on the palm and with forefinger.</desc>
        <opt>Sandy Loam
        <desc>A sandy loam sticks together more than a loamy sand but can be easily broken. Individual sand grains can be felt and heard if a wet sample is rubbed between the index finger and thumb and held close to the ear. (VDEPI 2009: AG0058)</desc></opt></opt></opt></opt></opt></opt></opt>
      </opts>
    </Material_Helper>
    <Update_Material t="button"/>
  </Material_Helper>
  <Vars f="hidden">
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Locus>

<Phase>
  <fmt>{{Square_ID}}-{{Phase_ID}}</fmt>
  <desc>A group of loci.</desc>
  <General>
    Phase
    <Area f="readonly" i="Square/Square/Area"/>
    <cols>
      <Square_ID f="readonly" i="Square/Square/Square_ID"/>
      <Phase_ID f="notnull autonum"/>
    </cols>
    <Description f="notnull">
      <desc>Describe the feature, any details of dimensions, disturbance, orientation etc.</desc>
    </Description>
    <Interpretation f="notnull">
      <desc>Describe your understanding of the feature function, phasing etc.</desc>
    </Interpretation>
    <Discussion>
      <desc>Add here any elaborations on the interpretation and description.</desc>
    </Discussion>
    <cols>
      <Length b="decimal">
        Length (m)
        <desc>Longest dimension in metres.</desc>
      </Length>
      <Width b="decimal">
        Width (m)
        <desc>Width or diameter in metres.</desc>
      </Width>
    </cols>
    <cols>
      <Top_Depth b="decimal">
        Top Depth (m)
      </Top_Depth>
      <Bottom_Depth b="decimal">
        Bottom Depth (m)
      </Bottom_Depth>
    </cols>
    <cols>
      <Mid_X b="decimal">
      </Mid_X>
      <Mid_Y b="decimal">
      </Mid_Y>
    </cols>
    <Plans>
    </Plans>
    <Section_Numbers>
    </Section_Numbers>
    <cols>
      <author f="readonly">
        Record Created By:
      </author>
      <timestamp f="readonly">
        Date recorded:
      </timestamp>
    </cols>
  </General>
  <Phase_Loci f="noscroll">
    Relationships
    <Create_Relationships_to_This_Phase t="button" l="Phase_Relationship">
      Create Relationships to this Phase
    </Create_Relationships_to_This_Phase>
    <cols>
      <Existing_Relationships_to_This_Phase t="list" f="nodata">
        Existing Relationships to this Phase
      </Existing_Relationships_to_This_Phase>
      <col>
        <Selected_Relationship t="webview"/>
        <Load_Related_Locus t="button"/>
        <Delete_Relationship t="button"/>
      </col>
    </cols>
  </Phase_Loci>
  <Add>
    Attachments
    <Photo t="camera">
      <desc>Use this button to take a photo of the feature using the camera on the tablet. Remember to include a scale in the photo.</desc>
    </Photo>
    <Attach_File t="file"/>
    <View_Attached_Files t="viewfiles"/>
    <Guide_2 t="webview">
      Here you can enter filenames or unique reference numbers for image stored on another device.
    </Guide_2>
    <Add_Photograph_Log t="button" lc="Photograph_Log"/>
    <Select_a_Photograph_Log t="dropdown" ec="Photograph_Log"/>
  </Add>
  <Vars f="hidden">
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
    <!--<Last_Feature_Type t="dropdown" vp="Phase/General/Feature_Type"/>-->
    <Last_Feature_Prefix/>
  </Vars>
</Phase>

<Sediment_Aggregate>
  Sediment/Aggregate
  <fmt>{{Component_Type}}-{{Percentage}}%</fmt>
  <Sediment_Aggregate>
    Sediment/Aggregate
    <Component_Type>
      <desc>Describe the components which make up 10% or more of the deposit.</desc>
      <opts>
        <opt>No Observation
        <desc>data not collected</desc></opt>
        <opt>Grit
        <desc>Size up to 5 mm.</desc></opt>
        <opt>Small Stones
        <desc>Size up to 10 mm.</desc></opt>
        <opt>Large stones
        <desc>Size over 10 mm.</desc></opt>
        <opt>Tauf
        <desc>Mud building material including mortar.</desc></opt>
        <opt>Midden
        <desc>Organic debris e.g. bones carbonised material phytoliths etc</desc></opt>
        <opt>Plaster
        <desc>Fragments of plaster.</desc></opt>
        <opt>Mudbrick
        <desc>Fragments of mudbrick or whole mudbricks not part of a coherent structural element.</desc></opt>
        <opt>Ash
        <desc>White/grey fine material which may contain charcoal and other burnt plant material.</desc></opt>
        <opt>Artefacts
        <desc>Human manufactured materials including lithics, beads, ground stone etc.</desc></opt>
      </opts>
    </Component_Type>
    <Percentage b="decimal">
      <desc>Enter the approximate % volume of this material in the Locus.</desc>
    </Percentage>
    <Soil_Stone_Shape>
      <opts>
        <opt>No Observation</opt>
        <opt>
          Angular
          <opt>Angular</opt>
          <opt>Sub-angular</opt>
          <opt>Very Angular</opt>
        </opt>
        <opt>
          Rounded
          <opt>Rounded</opt>
          <opt>Sub-rounded</opt>
          <opt>Well-rounded</opt>
        </opt>
        <opt>Dressed Stone</opt>
        <opt>Tabular</opt>
        <opt>Ground</opt>
      </opts>
    </Soil_Stone_Shape>
  </Sediment_Aggregate>
  <Vars f="hidden">
    <Locus_ID i="Locus/General/Locus_ID"/>
    <Square_ID i="Locus/General/Square_ID"/>
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Sediment_Aggregate>

<Photograph_Log>
  <desc>A record of images created and stored on another device, eg by a professional site photographer.</desc>
  <fmt>Photo-{{Locus_ID}}{{Square_ID if $0 then "-$0"}}{{Phase_ID if $0 then "-($0)"}}-{{Scene_Type}}</fmt>
  <Photograph_Log>
    <cols>
      <Locus_ID f="readonly" i="Locus/General/Locus_ID">
        <desc>Unique number or code for each Locus</desc>
      </Locus_ID>
      <Phase_ID f="readonly" i="Phase/General/Phase_ID">
        <desc>Unique number or code for each Phase</desc>
      </Phase_ID>
      <Photograph_Register_ID>
        <desc>Unique number or code allocated by creator of the image. It could be a filename or a reference number</desc>
      </Photograph_Register_ID>
    </cols>
    <Scene_Type>
      <desc>The type of scene captured, eg opening or closing view of the Locus. (Vocab: Open, Close, Other)</desc>
      <opts>
        <opt>Opening</opt>
        <opt>Closing</opt>
        <opt>Overview</opt>
        <opt>Other</opt>
      </opts>
    </Scene_Type>
    <Brief_Description/>
  </Photograph_Log>
  <Vars f="hidden">
    <Square_ID i="Locus/General/Square_ID Phase/General/Square_ID"/>
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Photograph_Log>

<Diary>
  <fmt>Diary-{{Timestamp}} {{author}}{{Square_ID if $0 then "-$0"}}</fmt>
  <Diary>
    <Title>
      <desc>Give your entry a simple, short title. Note that diary entries allow you to add information in addition to the locus, feature and artefact records elsewhere in the module and should not be the primary description point for those entities</desc>
    </Title>
    <cols>
      <Timestamp f="readonly">
        <desc>The date this entry is created will automatically appear here</desc>
      </Timestamp>
      <author>
        Created by
        <desc>Your name will be added here based on your login</desc>
      </author>
    </cols>
    <Text>
      <desc>Record your diary entry here in as much detail as necessary and append with photographs.</desc>
    </Text>
    <Photo t="camera">
      <desc>Use this button to take a photo relevant to this entry using the camera on the tablet</desc>
    </Photo>
  </Diary>
  <Vars f="hidden">
    <Square_ID i="Square/Square/Square_ID"/>
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Diary>

<!--Locus-to-Locus-->
<Relationship f="nodata">
  <Relationships f="noscroll">
    <Parent_Identifier t="webview"/>
    <cols>
      <Square_ID f="notnull"/>
      <Locus_ID f="notnull"/>
    </cols>
    <Relationship_Type t="dropdown" f="persist!"/>
    <Search t="button"/>
    <cols>
      <col>
        <Add_Relationship t="button"/>
        <Proposed_Relationship t="webview"/>
      </col>
      <col>
        <Delete_Relationship t="button"/>
        <Selected_Relationship t="webview"/>
      </col>
    </cols>
    <cols>
      <Unrelated_Loci t="list"/>
      <Existing_Relationships t="list"/>
    </cols>
  </Relationships>
  <Legacies f="noscroll">
    <Create_New_Legacy t="button" l="Legacy"/>
    <List_of_Existing_Legacies t="list" e="Legacy"/>
  </Legacies>
</Relationship>

<!--Locus Group to Locus-->
<Phase_Relationship f="nodata">
  <Relationships f="noscroll">
    <Parent_Identifier t="webview"/>
    <cols>
      <Square_ID f="notnull"/>
      <Locus_ID f="notnull"/>
    </cols>
    <Search t="button"/>
    <cols>
      <col>
        <Add_Relationship t="button"/>
        <Proposed_Relationship t="webview"/>
      </col>
      <col>
        <Delete_Relationship t="button"/>
        <Selected_Relationship t="webview"/>
      </col>
    </cols>
    <cols>
      <Unrelated_Loci t="list"/>
      <Existing_Relationships t="list"/>
    </cols>
  </Relationships>
  <Legacies f="noscroll">
    <Create_New_Legacy t="button" l="Legacy"/>
    <List_of_Existing_Legacies t="list" e="Legacy"/>
  </Legacies>
</Phase_Relationship>

<Pottery_Basket>
  <fmt>{{Area}} {{Square_ID}} {{Locus_ID}} {{Pottery_Basket_ID}}</fmt>
  <General>
    <cols>
      <Area i="Locus/General/Area"/>
      <Square_ID f="readonly" i="Locus/General/Square_ID Square/Square/Square_ID"/>
    </cols>
    <cols>
      <Locus_ID f="readonly" i="Locus/General/Locus_ID">
        <desc>Every archaeological locus (negative element (cut), deposit, structure, skeleton, artefact cluster) is given a unique 3 or 4 letter locus code. Each trench is designated with a separate letter which starts the code, so it is immediately obvious to which trench a locus belongs. For example locus HAA belongs to Trench H, locus MQP to Trench M etc.
        The loci are labelled consecutively in alphabetical order using the letters following the trench letter. For Trench H the first locus would be HAA, the second HAB, the third HAB and so on. In addition sets of letters can denote parts of trenches, buildings etc. E.g. HFs might denote loci from a specific building.
        Burial locus codes begin with the letter Z, followed by the trench letter. Hence burial ZHA is the first burial locus from trench H.
        Check with the trench supervisor who will assign the locus code from the central register.</desc>
      </Locus_ID>
      <Pottery_Basket_ID f="notnull autonum"/>
      <Date_Collected/>
    </cols>
    <gps/>
    <cols>
      <X_Coordinates b="decimal"/>
      <Y_Coordinates b="decimal"/>
      <Z_Coordinates b="decimal"/>
    </cols>
    <cols>
      <Top_Elevation_m b="decimal">
        Top Elevation (m)
      </Top_Elevation_m>
      <Bottom_Elevation_m b="decimal">
        Bottom Elevation (m)
      </Bottom_Elevation_m>
    </cols>
    <Weight_kg b="decimal">
        Weight (kg)
    </Weight_kg>
    <Type>
      <opts>
        <opt>Pottery</opt>
        <opt>Bone</opt>
        <opt>Metal</opt>
        <opt>Stone Object</opt>
        <opt>Glass</opt>
        <opt>Carbon 14 Sample</opt>
        <opt>Botanic Sample</opt>
        <opt>Shell</opt>
        <opt>Other</opt>
      </opts>
    </Type>
    <Washed t="radio">
      <opts>
        <opt>Yes</opt>
        <opt>No</opt>
        <opt>N/A</opt>
      </opts>
    </Washed>
    <Weighted t="radio">
      <opts>
        <opt>Yes</opt>
        <opt>No</opt>
        <opt>N/A</opt>
      </opts>
    </Weighted>
    <Analysed t="radio">
      <opts>
        <opt>Yes</opt>
        <opt>No</opt>
        <opt>N/A</opt>
      </opts>
    </Analysed>
    <Restorable t="radio">
      <opts>
        <opt>Yes</opt>
        <opt>No</opt>
        <opt>Maybe</opt>
        <opt>N/A</opt>
      </opts>
    </Restorable>
    <Principal_Period f="notnull">
      <!--@SOURCE: vocabs/period.xml-->
    </Principal_Period>
    <Chronology_Precision t="radio" f="notnull">
      <opts>
        <opt>Clean</opt>
        <opt>Mixed</opt>
        <opt>N/A</opt>
      </opts>
    </Chronology_Precision>
    <Chronology_Note/>
    <Intrusive_Materials_Comment/>
    <General_Notes/>
    <Attach_Photograph t="camera"/>
  </General>
  <Vars f="hidden">
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Pottery_Basket>

<Soil_Munsel_Color>
  <fmt>{{Soil_Munsel_Color_Locus_ID}} Color-{{Soil_Munsel_Color}}</fmt>
  <Add_Soil_Munsel_Color>
    <Soil_Munsel_Color>
      <!--@SOURCE: vocabs/munsel.xml-->
    </Soil_Munsel_Color>
  </Add_Soil_Munsel_Color>
  <Vars f="hidden">
    <Soil_Munsel_Color_Locus_ID i="Locus/General/Locus_ID"/>
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Soil_Munsel_Color>

<Legacy>
  <fmt>{{Square_ID}} L{{Locus_ID}}</fmt>
  <Legacy>
    <cols>
      <Square_ID f="notnull"/>
      <Locus_ID f="notnull"/>
    </cols>
  </Legacy>
  <Var f="hidden">
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Var>
</Legacy>

<Daily_Final_Height>
  <fmt>{{Date}} {{Daily_Final_Height}}</fmt>
  <Daily_Final_Height>
    <Date f="readonly"/>
    <Daily_Final_Height b="decimal">
            Daily Final Height (m)
    </Daily_Final_Height>
  </Daily_Final_Height>
  <Vars f="hidden">
    <Locus_ID i="Locus/General/Locus_ID"/>
    <Square_ID i="Locus/General/Square_ID"/>
    <Device_Code i="User/User_List/Device_Code!">
      <!--@SOURCE: vocabs/device-code.xml-->
    </Device_Code>
  </Vars>
</Daily_Final_Height>


<logic><![CDATA[
  <!--@SOURCE: logic/top-matter.bsh-->

  <!--@SOURCE: logic/shared.bsh-->
  <!--@SOURCE: logic/relationships-shared.bsh-->

  <!--@SOURCE: logic/user-tab-validation.bsh-->
  <!--@SOURCE: logic/relationships-locus-to-locus.bsh-->
  <!--@SOURCE: logic/relationships-feature-stratum-to-locus.bsh-->
  <!--@SOURCE: logic/dynamic-ui-helpers.bsh-->
  <!--@SOURCE: logic/dynamic-ui-locus.bsh-->


  <!--@SOURCE: logic/locus-dates.bsh-->
  <!--@SOURCE: logic/soil-texture-helper.bsh-->
  <!--@SOURCE: logic/custom-search.bsh-->
  <!--@SOURCE: logic/custom-validation.bsh-->
  <!--@SOURCE: logic/date-closed.bsh-->

  <!--@SOURCE: logic/custom-timestamp.bsh-->
  <!--@SOURCE: logic/custom-pottery-basket-timestamp.bsh-->
  <!--@SOURCE: logic/height-validation.bsh-->
  <!--@SOURCE: logic/duplication.bsh-->
]]></logic>
</module>