Big News - ATTinyCore 2.0.0 boards.txt is nearly ready! #648

SpenceKonde · 2022-01-22T13:14:23Z

SpenceKonde
Jan 22, 2022
Maintainer

This was the main issue blocking merging of 2.0.0 to master, and the start of field testing by my loyal ~~guinea pigs~~ users here!

By the end of this weekend I expect to have a boards.txt available that will look more or less like what the final one will, it will be merged into master (resulting in several misguided PR'ed changes being lost). and ATTinyCore 2.0.0 will be ready for testing by those willing to do manual installation. I expect there to be shedloads of bugs as large portions of the code have been rewritten neary from scratch and there has been zero testing because there hasn't been a boards.txt

It will NOT be hand edited - there is a script to generate it in the hopes of eliminating inconsistencies and the constant copy/paste errors that plague hand-edited boards.txt files. (I don't think I could have made a file format more prone to such errors if I tried), and that script will be in the repo (and it is HIDEOUS, and someone who's competent at python could surely make it vastly better without much work.

What will not be ready by the end of the weekend? Bootloaders.

Optiboot will not take that long (the script to generate the makefile is easy-peasy compared to boards.txt)

Micronucleus will take some more time, especially in order to support the two new parts, though I do not expect them to pose a particular problem.. All parts will have several entry condition options, and some will additionally have USB pin configuration options (the 841 and likely the 84 exist in two versions, with the D+ and D- pins swapped. (yup, really). I would like to have the reset-disable option available, but that raises the question of what to do if someone uses the bootloader "upgrade" functionality with a part set to only enter the bootloader of reset pin reset, but they've disabled reset.

There will NOT be an option to disable reset when burning Optiboot due to the bug in the implemention of virtual boot that soft-bricks boards too often for production use, even if ISP programming is possible; an option to disable reset on optiboot while that bug is there is something I cannot do with a clear conscience,

hmeijdam · 2022-01-22T16:49:35Z

hmeijdam
Jan 22, 2022

The manual install (documentation) looks a whole lot simpler than for Megatinycore and since that one worked, I should be able to test some stuff.

0 replies

SpenceKonde · 2022-01-25T07:13:28Z

SpenceKonde
Jan 25, 2022
Maintainer Author

Yeah since the parts aren't recent releases, there;s no crap with having to update the toolchain,which I assume is what you refer to,

There is now a usable boards.txt as well as almost all of the new stuff checked into the V2.0.0-dev branch. Everything is at least compiling bare minimum, I think. We need CI set up here, like what I've got on DxCore and megaTinyCore, since travis stopped doing it's thing ages ago. And there are still no bootloader binaries (for either bootloader)

1 reply

hmeijdam Jan 25, 2022

Yes, I meant the tool-chain. For now I am ready to go. I created a new portable Arduino IDE 1.8.13 (as you recommended that version) and have the Github desktop synchronize that with your master. It will tell me if there is something new to fetch.

SpenceKonde · 2022-01-25T07:43:38Z

SpenceKonde
Jan 25, 2022
Maintainer Author

The abomination that generates boards.txt is create_boards_txt.py in avr/extras/development.

To state the obvious, I am a pretty crap python programmer.

0 replies

felias-fogg · 2022-01-25T12:57:29Z

felias-fogg
Jan 25, 2022

Would be great, if one could have a menu entry "Optimize for debugging" in order to use the compiler switch "-Og". I can send you an PR, if you want. Along the same line: It would be great to export the ELF file together with the HEX file (in platform.txt).

0 replies

SpenceKonde · 2022-01-25T21:50:25Z

SpenceKonde
Jan 25, 2022
Maintainer Author

Would the optimize for -Og switch want to be used in place of -Os?

That sort of thing could be done; I didn't even realize that elves were helpful for debugging. If you want to give a PR, that'd be great, but just remember to make that PR against the v2.0.0-dev branch, and that changes to boards.txt are not persisted - changes need to go in the script in avr/extras/development. I'd also certainly welcome more eyes on the v2.0.0 codebase as we move in the direction of releasing (I've nearly got the micronucleus binaries ready.... 2.0.0 will be supplied with only 120 Micronucleus hex files, (there are 10 entry conditions, and 7 boards, but 2 of them have 3 variants, another has 2. There are 8 optiboot boards, 2 of which can have either of two serial ports used, and one of which has 3 serial configurations - but they can run at 1MHz, 8 MHz, 6 MHz, 12 MHz, 16 MHz, or 20 MHz plus like 8 different uart crystal speeds, AND there are two entry conditions AND most chips have two flash size options! so the build will involve like 600+ files being generated. It's absurd. There's a reason I have to script the generation of build scripts... And that's optiboot for 14 classic tinyAVR parts.

wanna know how many I have to supply with megaTinyCore? To support all 35 parts?
Just 22. DxCore supports 24 parts, with 65 binaries (mostly because they have up to 5 serial ports, and each flash size needs a separate bootloader - while the tinies are all __AVR_ARCH__==103 so they can share a bootloader; The DD-series will be able to get away with one bootloader for the 16 and 32 pin parts, but they have a billion and one alternate pinsets for USART0, so they wind up having a worse ratio. A refactoring might make it possible to do away with a lot of the DxCore bootloaders by making anything 64k or less use the same bootloader (word writes) - the reason I don't have that now is because I didn't know how the "halt the CPU" mechanic worked w/word writes - now I know that as long the 70 us is passed before 2 bytes have arrived (115200 baud is like... 86us per byte, and you have an effective 2 byte buffer, so you'd be fine to write directly, which would save enough flash to make one bootloader handle 32k and 64k parts. Might even be able to share between DA/DB and DD.... I don't think anything relevant to bootloader is different between them....

0 replies

hmeijdam · 2022-01-26T06:45:08Z

hmeijdam
Jan 26, 2022

I also tried to load the 2.0.0 dev branch in my github desktop, but unlike the master branch it will not accept my username password.

I am using this link to clone the repository into Github Desktop
https://github.com/SpenceKonde/ATTinyCore/tree/v2.0.0-dev

2 replies

per1234 Jan 26, 2022

I am using this link to clone the repository into Github Desktop
https://github.com/SpenceKonde/ATTinyCore/tree/v2.0.0-dev

I think that must be the cause of the error. That is not a Git repository URL. That is only a URL for viewing the repository on the GitHub website.

Follow these instructions to clone ATTinyCore:
https://docs.github.com/en/desktop/contributing-and-collaborating-using-github-desktop/adding-and-cloning-repositories/cloning-a-repository-from-github-to-github-desktop

Then follow these instructions to checkout the v2.0.0-dev branch:
https://docs.github.com/en/desktop/contributing-and-collaborating-using-github-desktop/making-changes-in-a-branch/managing-branches#switching-between-branches

hmeijdam Jan 26, 2022

Thanks @per1234 , that clarifies and I have it working now. I can switch between the master branch and the "v2.0.0-dev" branch.

It took me a while to realize that I cannot switch to a branch that is a board-manager release as the directory structure of the core is different for those. As soon as I switched to one of those branches the core would disappear from my IDE.

SpenceKonde · 2022-01-26T09:01:43Z

SpenceKonde
Jan 26, 2022
Maintainer Author

There, I've just checked in 272 (untested, obviously) micronucleus binaries and newly generated boards.txt it which uses these files and fixes some other problems. Oh and I got rid of the tinySoftSerial warning and saved 50 bytes of flash there.
Anyone wanna start banging on it and see if any of them work?

0 replies

hmeijdam · 2022-01-26T09:05:49Z

hmeijdam
Jan 26, 2022

Tinysoftserial error

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny\TinySoftwareSerial.cpp:37:44: warning: always_inline function might not be inlinable [-Wattributes]
     __attribute__((always_inline)) uint8_t getch() {
                                            ^~~~~

After a "fetch origin" it's gone. no more warning when compiling empty sketch

0 replies

SpenceKonde · 2022-01-26T10:02:16Z

SpenceKonde
Jan 26, 2022
Maintainer Author

Yeah, I fixed that one a few hours ago, and saved 50 bytes of flash by using a byte instead of an int to represent a value that will always be between 0 and 32 on all supported parts.....

…

On Wed, Jan 26, 2022 at 4:06 AM Hans ***@***.***> wrote: Tinysoftserial error E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny\TinySoftwareSerial.cpp:37:44: warning: always_inline function might not be inlinable [-Wattributes] __attribute__((always_inline)) uint8_t getch() { ^~~~~ After a "fetch origin" it's gone. no more warning when compiling empty sketch — Reply to this email directly, view it on GitHub <#648 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTXEW2WNZTOFME2CZ2PEBTUX62PTANCNFSM5MR62SYQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.***>

--

____________ Spence Konde Azzy’S Electronics New products! Check them out at tindie.com/stores/DrAzzy GitHub: github.com/SpenceKonde ATTinyCore <https://github.com/SpenceKonde/ATTinyCore>: Arduino support for all pre-2016 tinyAVR with >2k flash! megaTinyCore <https://github.com/SpenceKonde/megaTinyCore>: Arduino support for all post-2016 tinyAVR parts! DxCore <https://github.com/SpenceKonde/DxCore>: Arduino support for the AVR Dx-series parts, the latest and greatest from Microchip! Contact: ***@***.***

0 replies

hmeijdam · 2022-01-26T10:09:24Z

hmeijdam
Jan 26, 2022

Where do you want the V2 bugs to be posted?

e.g. this one with the "constrain" command.

On the "master" version below code compiles fine, but in the V2 dev it throws an error.

void setup() {
  int sensVal = constrain(sensVal, 10, 150);
}

void loop() {
}

results in error when compiling on V2.0.0-dev

Arduino: 1.8.13 (Windows 10), Board: "ATtiny85/45/25 (No Bootloader), ATtiny85, 8 MHz (internal), EEPROM retained, RX on PB1, TX on PB (default PB0), B.O.D. Disabled (saves power), Enabled"



E:\Arduino\arduino-1.8.13-attinycore\arduino-builder -dump-prefs -logger=machine -hardware E:\Arduino\arduino-1.8.13-attinycore\hardware -hardware E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware -tools E:\Arduino\arduino-1.8.13-attinycore\tools-builder -tools E:\Arduino\arduino-1.8.13-attinycore\hardware\tools\avr -built-in-libraries E:\Arduino\arduino-1.8.13-attinycore\libraries -libraries E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries -fqbn=ATTinyCore:avr:attinyx5:chip=85,clock=internal_8m,eesave=aenable,softserial=enable,bod=disable,millis=enabled -ide-version=10813 -build-path C:\Users\Hans\AppData\Local\Temp\arduino_build_596433 -warnings=none -build-cache C:\Users\Hans\AppData\Local\Temp\arduino_cache_11383 -prefs=build.warn_data_percentage=75 -verbose C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino

E:\Arduino\arduino-1.8.13-attinycore\arduino-builder -compile -logger=machine -hardware E:\Arduino\arduino-1.8.13-attinycore\hardware -hardware E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware -tools E:\Arduino\arduino-1.8.13-attinycore\tools-builder -tools E:\Arduino\arduino-1.8.13-attinycore\hardware\tools\avr -built-in-libraries E:\Arduino\arduino-1.8.13-attinycore\libraries -libraries E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries -fqbn=ATTinyCore:avr:attinyx5:chip=85,clock=internal_8m,eesave=aenable,softserial=enable,bod=disable,millis=enabled -ide-version=10813 -build-path C:\Users\Hans\AppData\Local\Temp\arduino_build_596433 -warnings=none -build-cache C:\Users\Hans\AppData\Local\Temp\arduino_cache_11383 -prefs=build.warn_data_percentage=75 -verbose C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino

Using board 'attinyx5' from platform in folder: E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr

Using core 'tiny' from platform in folder: E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr

Detecting libraries used...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=c++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_596433\\sketch\\sketch_jan26a.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Generating function prototypes...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=c++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_596433\\sketch\\sketch_jan26a.ino.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_596433\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_596433\\preproc\\ctags_target_for_gcc_minus_e.cpp"

Compiling sketch...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=c++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_596433\\sketch\\sketch_jan26a.ino.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_596433\\sketch\\sketch_jan26a.ino.cpp.o"

In file included from C:\Users\Hans\AppData\Local\Temp\arduino_build_596433\sketch\sketch_jan26a.ino.cpp:1:0:

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino: In function 'void setup()':

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:54:5: error: 'typeof' was not declared in this scope

     typeof (x) _x = (x);             \

     ^

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino:2:17: note: in expansion of macro 'constrain'

   int sensVal = constrain(sensVal, 10, 150);

                 ^~~~~~~~~

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:54:5: note: suggested alternative: 'feof'

     typeof (x) _x = (x);             \

     ^

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino:2:17: note: in expansion of macro 'constrain'

   int sensVal = constrain(sensVal, 10, 150);

                 ^~~~~~~~~

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:57:3: error: '_x' was not declared in this scope

   _x < _l ? _l : _x > _h ? _h :_x;})

   ^

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino:2:17: note: in expansion of macro 'constrain'

   int sensVal = constrain(sensVal, 10, 150);

                 ^~~~~~~~~

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:57:8: error: '_l' was not declared in this scope

   _x < _l ? _l : _x > _h ? _h :_x;})

        ^

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino:2:17: note: in expansion of macro 'constrain'

   int sensVal = constrain(sensVal, 10, 150);

                 ^~~~~~~~~

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:57:23: error: '_h' was not declared in this scope

   _x < _l ? _l : _x > _h ? _h :_x;})

                       ^

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino:2:17: note: in expansion of macro 'constrain'

   int sensVal = constrain(sensVal, 10, 150);

                 ^~~~~~~~~

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:57:36: error: void value not ignored as it ought to be

   _x < _l ? _l : _x > _h ? _h :_x;})

                                    ^

C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_491786\sketch_jan26a.ino:2:17: note: in expansion of macro 'constrain'

   int sensVal = constrain(sensVal, 10, 150);

                 ^~~~~~~~~

exit status 1

Error compiling for board ATtiny85/45/25 (No Bootloader).

0 replies

hmeijdam · 2022-01-26T11:51:51Z

hmeijdam
Jan 26, 2022

For the Attiny85 it seems the INTERNAL voltage reference definition has changed.

When using analogReference(INTERNAL);

I get this error in V2.0.0-dev.

In file included from E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:280:0,
                 from C:\Users\Hans\AppData\Local\Temp\arduino_build_576278\sketch\sketch_jan26a.ino.cpp:1:
C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_868185\sketch_jan26a.ino: In function 'void setup()':
E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\variants\tinyx5/pins_arduino.h:147:30: error: 'INTERNAL' was not declared in this scope
 #define INTERNAL             INTERNAL
                              ^
C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_868185\sketch_jan26a.ino:3:17: note: in expansion of macro 'INTERNAL'
 analogReference(INTERNAL);
                 ^~~~~~~~

0 replies

SpenceKonde · 2022-01-26T13:44:00Z

SpenceKonde
Jan 26, 2022
Maintainer Author

Wonderful. I know how to fix all of those. I think fix for the warnings in, the type of one 8s easy, happened on the other cores when they went to c++17, because I used c++ instead of gnu++standard. And I guess I slipped while standardizing the ref names

…

____________ Spence Konde Azzy’S Electronics New products! Check them out at tindie.com/stores/DrAzzy GitHub: github.com/SpenceKonde ATTinyCore: Arduino support for almost every ATTiny microcontroller Contact: ***@***.***

On Wed, Jan 26, 2022, 06:52 Hans ***@***.***> wrote: For the Attiny85 it seems the INTERNAL voltage reference definition has changed. When using analogReference(INTERNAL); I get this error in V2.0.0-dev. In file included from E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\cores\tiny/Arduino.h:280:0, from C:\Users\Hans\AppData\Local\Temp\arduino_build_576278\sketch\sketch_jan26a.ino.cpp:1: C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_868185\sketch_jan26a.ino: In function 'void setup()': E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\variants\tinyx5/pins_arduino.h:147:30: error: 'INTERNAL' was not declared in this scope #define INTERNAL INTERNAL ^ C:\Users\Hans\AppData\Local\Temp\arduino_modified_sketch_868185\sketch_jan26a.ino:3:17: note: in expansion of macro 'INTERNAL' analogReference(INTERNAL); ^~~~~~~~ — Reply to this email directly, view it on GitHub <#648 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTXEW2BEIFCMVP2IGRYQELUX7N6HANCNFSM5MR62SYQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.***>

3 replies

hmeijdam Jan 26, 2022

I can't get that warning consistent, as I noticed that a warning may stay visible if the compiler uses a pre-compiled core. Now I need to empty my temp directory after every test, to know for sure the core get's compiled again.

Currently working on another error, where I get a unterminated #ifdef in Wire.h

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\libraries\Wire\src/Wire.h:42:0: error: unterminated #ifdef
 #ifdef TWDR

So I looked at Wire.h in Notepad++ to check the nesting of the # ifdefs. That nesting was indeed missing a "#endif"

I could find that you have added:

#if ((RAMEND+1) - RAMSTART) > 128
  #define BUFFER_LENGTH 32
#else
  #define BUFFER_LENGTH 16

// WIRE_HAS_END means Wire has end()
#define WIRE_HAS_END 1

I am unsure if that need an "#endif"

so I changed it to

#if ((RAMEND+1) - RAMSTART) > 128
  #define BUFFER_LENGTH 32
#else
  #define BUFFER_LENGTH 16

#endif

// WIRE_HAS_END means Wire has end()
#define WIRE_HAS_END 1

No more unterminated ifdef But then I get a huge boatload of other errors, so I am scratching my head now.

SpenceKonde Jan 27, 2022
Maintainer Author

I'll look into the situation with Wire.

The version of Wire in the master branch is widlly different from the one in 2.0.0 because someone gave me a PR against the wrong branch.

SpenceKonde Jan 27, 2022
Maintainer Author

Oh - and you can force it to rebuild everything by changing the selection from any tools submenu that is defined by the core, even ones that don't change the compilation

SpenceKonde · 2022-01-27T20:10:45Z

SpenceKonde
Jan 27, 2022
Maintainer Author

Fixed wire is checked in. That was basically the whole 3-4 hours.

25 changed files with 1,057 additions and 1,161 deletions. because Arduino.h and all the variant files excepot the tinyx8 needed to be modified.

1 reply

hmeijdam Jan 27, 2022

The compilation error is gone now, however now I get a linker error.

just the error:

C:\Users\Hans\AppData\Local\Temp\ccECBf8M.ltrans0.ltrans.o: In function `__deleting_dtor ':
E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI\src/BMP180TwoWire.cpp:31: undefined reference to `operator delete(void*, unsigned int)'
C:\Users\Hans\AppData\Local\Temp\ccECBf8M.ltrans0.ltrans.o: In function `__deleting_dtor ':
E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI\src/BMP180I2C.cpp:28: undefined reference to `operator delete(void*, unsigned int)'
collect2.exe: error: ld returned 1 exit status

Just in case you want it: The whole dump of the compilation & link attempt;

Arduino: 1.8.13 (Windows 10), Board: "ATtiny85/45/25 (No Bootloader), -Os (size, recommended), ATtiny85, 8 MHz (internal), EEPROM retained, RX on PB1, TX on PB (default PB0), B.O.D. Disabled (saves power), Enabled"


E:\Arduino\arduino-1.8.13-attinycore\arduino-builder -dump-prefs -logger=machine -hardware E:\Arduino\arduino-1.8.13-attinycore\hardware -hardware E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware -tools E:\Arduino\arduino-1.8.13-attinycore\tools-builder -tools E:\Arduino\arduino-1.8.13-attinycore\hardware\tools\avr -built-in-libraries E:\Arduino\arduino-1.8.13-attinycore\libraries -libraries E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries -fqbn=ATTinyCore:avr:attinyx5:optimization=size,chip=85,clock=internal_8m,eesave=aenable,softserial=enable,bod=disable,millis=enabled -ide-version=10813 -build-path C:\Users\Hans\AppData\Local\Temp\arduino_build_872436 -warnings=none -build-cache C:\Users\Hans\AppData\Local\Temp\arduino_cache_65040 -prefs=build.warn_data_percentage=75 -verbose E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI\examples\BMP180_I2C\BMP180_I2C.ino

E:\Arduino\arduino-1.8.13-attinycore\arduino-builder -compile -logger=machine -hardware E:\Arduino\arduino-1.8.13-attinycore\hardware -hardware E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware -tools E:\Arduino\arduino-1.8.13-attinycore\tools-builder -tools E:\Arduino\arduino-1.8.13-attinycore\hardware\tools\avr -built-in-libraries E:\Arduino\arduino-1.8.13-attinycore\libraries -libraries E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries -fqbn=ATTinyCore:avr:attinyx5:optimization=size,chip=85,clock=internal_8m,eesave=aenable,softserial=enable,bod=disable,millis=enabled -ide-version=10813 -build-path C:\Users\Hans\AppData\Local\Temp\arduino_build_872436 -warnings=none -build-cache C:\Users\Hans\AppData\Local\Temp\arduino_cache_65040 -prefs=build.warn_data_percentage=75 -verbose E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI\examples\BMP180_I2C\BMP180_I2C.ino

Using board 'attinyx5' from platform in folder: E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr

Using core 'tiny' from platform in folder: E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr

Detecting libraries used...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for Wire.h: [[email protected]]

ResolveLibrary(Wire.h)

  -> candidates: [[email protected]]

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Alternatives for BMP180I2C.h: [[email protected]]

ResolveLibrary(BMP180I2C.h)

  -> candidates: [[email protected]]

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\USI_TWI_Master\\USI_TWI_Master.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\USI_TWI_Slave\\USI_TWI_Slave.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\Wire.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\WireS.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\twi.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src\\BMP180I2C.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src\\BMP180MI.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src\\BMP180TwoWire.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE

Generating function prototypes...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -mrelax -w -x c++ -E -CC -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE

"E:\\Arduino\\arduino-1.8.13-attinycore\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\preproc\\ctags_target_for_gcc_minus_e.cpp"

Compiling sketch...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp.o"

Compiling libraries...

Compiling library "Wire"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\twi.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\twi.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\WireS.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\WireS.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\Wire.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\Wire.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\USI_TWI_Master\\USI_TWI_Master.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\USI_TWI_Master\\USI_TWI_Master.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src\\USI_TWI_Slave\\USI_TWI_Slave.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\USI_TWI_Slave\\USI_TWI_Slave.c.o"

Compiling library "BMP180MI"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src\\BMP180I2C.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\BMP180MI\\BMP180I2C.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src\\BMP180TwoWire.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\BMP180MI\\BMP180TwoWire.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\libraries\\Wire\\src" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\libraries\\BMP180MI\\src\\BMP180MI.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\BMP180MI\\BMP180MI.cpp.o"

Compiling core...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -x assembler-with-cpp -flto -MMD -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring_pulse.S" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_pulse.S.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\WInterrupts.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\WInterrupts.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring_pulse.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_pulse.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring_analog_noise.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_analog_noise.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring_digital.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_digital.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring_shift.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_shift.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -Wall -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mrelax -Werror=implicit-function-declaration -Wundef -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\wiring_analog.c" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_analog.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\HardwareSerial.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\HardwareSerial.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\WMath.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\WMath.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\Stream.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\Stream.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\TinySoftwareSerial.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\TinySoftwareSerial.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\Tone.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\Tone.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\abi.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\abi.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\Print.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\Print.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\main.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\main.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\WString.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\WString.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -Wall -std=gnu++17 -fpermissive -Wno-sized-deallocation -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mrelax -mmcu=attiny85 -DF_CPU=8000000L -DCLOCK_SOURCE=0 -DARDUINO=10813 -DARDUINO=10813 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-DATTINYCORE=\"2.0.0-dev\"" -DATTINYCORE_MAJOR=2UL -DATTINYCORE_MINOR=0UL -DATTINYCORE_PATCH=0UL -DATTINYCORE_RELEASED=0 "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny" "-IE:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\variants\\tinyx5" "E:\\Arduino\\arduino-1.8.13-attinycore\\portable\\sketchbook\\hardware\\ATTinyCore\\avr\\cores\\tiny\\new.cpp" -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\new.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_pulse.S.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\WInterrupts.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_analog.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_analog_noise.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_digital.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_pulse.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\wiring_shift.c.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\HardwareSerial.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\Print.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\Stream.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\TinySoftwareSerial.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\Tone.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\WMath.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\WString.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\abi.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\main.cpp.o"

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\core.a" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\core\\new.cpp.o"

Archiving built core (caching) in: C:\Users\Hans\AppData\Local\Temp\arduino_cache_65040\core\core_8d3c5748c6fbb2d1f65586fc9a909a76.a

Linking everything together...

"E:\\Arduino\\arduino-1.8.13-attinycore\\hardware\\tools\\avr/bin/avr-gcc" -Wall -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mrelax -mmcu=attiny85 -o "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436/BMP180_I2C.ino.elf" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\sketch\\BMP180_I2C.ino.cpp.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\twi.c.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\Wire.cpp.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\WireS.cpp.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\USI_TWI_Master\\USI_TWI_Master.c.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\Wire\\USI_TWI_Slave\\USI_TWI_Slave.c.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\BMP180MI\\BMP180I2C.cpp.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\BMP180MI\\BMP180MI.cpp.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436\\libraries\\BMP180MI\\BMP180TwoWire.cpp.o" "C:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436/core\\core.a" "-LC:\\Users\\Hans\\AppData\\Local\\Temp\\arduino_build_872436" -lm

C:\Users\Hans\AppData\Local\Temp\ccECBf8M.ltrans0.ltrans.o: In function `__deleting_dtor ':

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI\src/BMP180TwoWire.cpp:31: undefined reference to `operator delete(void*, unsigned int)'

C:\Users\Hans\AppData\Local\Temp\ccECBf8M.ltrans0.ltrans.o: In function `__deleting_dtor ':

E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI\src/BMP180I2C.cpp:28: undefined reference to `operator delete(void*, unsigned int)'

collect2.exe: error: ld returned 1 exit status

Using library Wire at version 2.0.0 in folder: E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\hardware\ATTinyCore\avr\libraries\Wire 

Using library BMP180MI at version 0.2.0 in folder: E:\Arduino\arduino-1.8.13-attinycore\portable\sketchbook\libraries\BMP180MI 

exit status 1

Error compiling for board ATtiny85/45/25 (No Bootloader).

SpenceKonde · 2022-01-27T20:33:28Z

SpenceKonde
Jan 27, 2022
Maintainer Author

Durrrrr... C++ 17 stuff.
should work now - just pulled in new+delete from megatinycore/dxcore

2 replies

hmeijdam Jan 27, 2022

Yes now it is fixed. 👍🏻

hmeijdam Jan 27, 2022

And a size bonus

Compiled with Master version

Sketch uses 6686 bytes (81%) of program storage space. Maximum is 8192 bytes.
Global variables use 432 bytes (84%) of dynamic memory, leaving 80 bytes for local variables. Maximum is 512 bytes.

Compiled with 2.0.0-dev version

Sketch uses 6608 bytes (80%) of program storage space. Maximum is 8192 bytes.
Global variables use 429 bytes (83%) of dynamic memory, leaving 83 bytes for local variables. Maximum is 512 bytes.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Big News - ATTinyCore 2.0.0 boards.txt is nearly ready! #648

{{title}}

Replies: 14 comments 9 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

Select a reply

Big News - ATTinyCore 2.0.0 boards.txt is nearly ready! #648

SpenceKonde Jan 22, 2022 Maintainer

Replies: 14 comments · 9 replies

SpenceKonde Jan 25, 2022 Maintainer Author

SpenceKonde Jan 25, 2022 Maintainer Author

SpenceKonde Jan 25, 2022 Maintainer Author

SpenceKonde Jan 26, 2022 Maintainer Author

SpenceKonde Jan 26, 2022 Maintainer Author

SpenceKonde Jan 26, 2022 Maintainer Author

SpenceKonde Jan 27, 2022 Maintainer Author

SpenceKonde Jan 27, 2022 Maintainer Author

SpenceKonde Jan 27, 2022 Maintainer Author

SpenceKonde Jan 27, 2022 Maintainer Author

SpenceKonde
Jan 22, 2022
Maintainer

Replies: 14 comments 9 replies

SpenceKonde
Jan 25, 2022
Maintainer Author

SpenceKonde
Jan 25, 2022
Maintainer Author

SpenceKonde
Jan 25, 2022
Maintainer Author

SpenceKonde
Jan 26, 2022
Maintainer Author

SpenceKonde
Jan 26, 2022
Maintainer Author

SpenceKonde
Jan 26, 2022
Maintainer Author

SpenceKonde Jan 27, 2022
Maintainer Author

SpenceKonde Jan 27, 2022
Maintainer Author

SpenceKonde
Jan 27, 2022
Maintainer Author

SpenceKonde
Jan 27, 2022
Maintainer Author