Fabrication

Fabrication

The MISRC is a 2 sided PCB with a dedicated sub-board the USB FX3 explorer an 2 board solution device.

Retail Selling

• Buy a MISRC

Pre-Fabrication

Thanks to assembly services today you can have almost any PCB fabricated

• 1 Click Ish

PCB-Fabrication

• Gerber's (Specs of the bare PCB size ware to place traces/pads)
• Position/Centroid File (Ware to drill holes)
• Bill of Materials "BOM" (Required list of parts)

Hand Soldering

(Note add 1-2-3 step images)

As the board is built around 0805 standard size parts most people with a steady handy can hand solder these parts with a Bevel tip and a pair of tweezers.

Step 1:

Clean your PCB with 99.9% IPA, this cleans any surface contaminate off.

Step 2:

Prepare your Flux, Solder 60/40 & Components

Step 3:

You can use solder paste if you have a solder stencil made or manually populate each pad.

Or bare solder via place component hold down with tweezers solder 1 end.

Step 4:

You will want to populate 2.54mm header pins last, and BNCs last as these are the hardest to de-solder and headers easiest to melt.