Black Magic Probe Firmware for STM32

It contains the pre-compiled Black Magic Probe firmware for STM32f103 Boards which can be easily uploaded with any USB-to-Serial converter.

The author assumes that Python is already installed in the user's system.

How to flash?

Just follow the simple steps:

Step 1:

Connect USB-to-Serial Converter with the Blue-Pill board as show here or here. Set BOOT0 jumper on the board to 1 and press reset.

Also, download this repository in the desired location.

Step 2:

Linux

Open Terminal and run:sudo python stm32loader.py -p /dev/ttyUSB0 -e -w -v -g 0x0 bmp.bin

Windows

Open Command Window and run:python stm32loader.py -p COM2 -e -w -v -g 0x0 bmp.bin

The Ouput should look something like this:

Bootloader version 22
Chip id: 0x410 (STM32 Medium-density)
Write 256 bytes at 0x8000000
Write 256 bytes at 0x8000100
Write 256 bytes at 0x8000200
.
.
.
[snip]
Write 256 bytes at 0x8013500
Read 256 bytes at 0x8000000
Read 256 bytes at 0x8000100
Read 256 bytes at 0x8000200
.
.
.
[snip]
Read 256 bytes at 0x8013400
Read 256 bytes at 0x8013500
Verification OK

If you see this, you are done !! Cheers! 🍻 😉

Plug out the Serial Converter and plug the Blue-Pill Board with the native USB.