Prototype Boards

Here are some of the prototype boards for mounting your project via soldering:

• DrAzzy: Various sizes of prototype boards
• DrAzzy: 2" x 4" prototyping boards
• DrAzzy: 1" x 2" prototyping boards (perfect for Teensy 3.2/4.0)
• DrAzzy: mint-tin prototyping board
• DrAzzy: Prototype boards with breakaway mounting holes
• DrAzzy: 4" x 4" premium prototyping board

---

• Adafruit mint-tin perma-proto board, 30x2 rows of pins, outside power rails
• Adafruit plain mint-tin container
• Adafruit 1/2 sized perma-proto board, 30x2 rows of pins, outside power rails
• Adafruit 1/4 sized perma-proto board, 15x2 rows of pins, outside power rails
• Adafruit full sized perma-proto board, 60x2 rows of pins, outside power rails
• Adafruit small mint-tin perma-proto board, inside power rails (just right for Teensy 3.2/4.0)
• Adafruit combination perma-proto pack

---

• ElectroCookie combination prototype boards
• ElectroCookie double column prototype board
• ElectroCookie large prototype board
• ElectroCookie snapable prototype board
• ElectroCookie Mini PCB prototype boards

---

• Electronics-Salon Solderable Breadboard Proto Board

---

• Treedix, 63x2 rows of pins, outside power rails
• Treedix, 63x2 rows of pins, no power rails
• Treedix, 30x2 rows of pins, outside power rails
• Treedix, 17x2 rows of pins, no power rails
• Treedix, 63x4 rows of pins, outside power rails

---

• Robot50.net board -- this board is no longer sold, but the board creator has put up the designs on the internet so you can print them up at a PCB fabricator like http://oshpark.com. It is useful for Teensy 3.2 and 4.0 because it brings out a parallel set of pins to bring out your devices. However, with only 20 pins being brought out, it is not as useful for the Teensy 3.5, 3.6, or 4.1.