babystepping with klipper #2321

antlestxp · 2021-10-06T03:11:15Z

antlestxp
Oct 6, 2021

is it possible to change the code for babystepping? I am using klipper and it doesn't understand M290 commands. It uses "SET_CODE_OFFSET Z_ADJUST" to offset the nozzle. Example "SET_GCODE_OFFSET Z_ADJUST=0.1 MOVE=1" would offset the nozzle 0.1mm for all gcode after it was submitted.

jneilliii · 2021-10-06T03:55:58Z

jneilliii
Oct 6, 2021

SSH to the pi and run the command nano ~/.config/octodash/config.json and find the section for printer and modify the babystepping command.

0 replies

antlestxp · 2021-10-06T05:15:48Z

antlestxp
Oct 6, 2021
Author

I see that you can change the babystep command in the config file but it appends the z offset after the code. The syntax is wrong. I would need to change the config and the step value that is added to the end of the command.

…

On Tue, Oct 5, 2021, 8:56 PM jneilliii ***@***.***> wrote: SSH to the pi and run the command nano ~/.config/octodash/config.json and find the section for printer and modify the babystepping command. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2321 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODVYBPUCPCNFRWEHR62LUFPCFRANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

0 replies

jneilliii · 2021-10-06T13:56:19Z

jneilliii
Oct 6, 2021

I would think you could do that on the klipper side, potentially with a gcode macro script or something to define the M290 command. I thought that was the one of klipper's super-powers.

0 replies

antlestxp · 2021-10-06T16:39:51Z

antlestxp
Oct 6, 2021
Author

Oh I will have to look into that. I just moved over from RRF. Still a bunch to learn.

…

On Wed, Oct 6, 2021, 6:56 AM jneilliii ***@***.***> wrote: I would think you could do that on the klipper side, potentially with a gcode macro script or something to define the M290 command. I thought that was the one of klipper's super-powers. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2321 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODV53TFZFMZDA7BFBDC3UFRIQ3ANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

0 replies

antlestxp · 2021-10-07T02:59:01Z

antlestxp
Oct 7, 2021
Author

You are on the right track. I can create a macro that would read the m290 command and execute the command that klipper understands. The hurdle is that octodash outputs for example "m290 z0.01". When I use that Klipper doesn't like it. I believe the decimal is not allowed to be in the command. It doesn't like the space either but that is easy to change in the octodash config.json. I did this macro [gcode_macro BABYZ0.01] # Babystep Up .1 gcode: SET_GCODE_OFFSET Z_ADJUST=0.01 MOVE=1 [gcode_macro BABYZ-0.01] # Babystep Down .1 gcode: SET_GCODE_OFFSET Z_ADJUST=-0.01 MOVE=1 Klipper freaks out when reading BABYZ0.01. I think if I could get octodash to output 1 instead of 0.01 everything would work

…

On Wed, Oct 6, 2021 at 6:56 AM jneilliii ***@***.***> wrote: I would think you could do that on the klipper side, potentially with a gcode macro script or something to define the M290 command. I thought that was the one of klipper's super-powers. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2321 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODV53TFZFMZDA7BFBDC3UFRIQ3ANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

0 replies

jneilliii · 2021-10-07T03:12:49Z

jneilliii
Oct 7, 2021

Did you try parameters? https://klipper.discourse.group/t/macro-creation-tutorial/30/4

[gcode_macro BABYZ]
  SET_GCODE_OFFSET Z_ADJUST={ params.babystep } MOVE=1

then set the config.json value to BABYZ babystep=.

0 replies

antlestxp · 2021-10-07T03:27:03Z

antlestxp
Oct 7, 2021
Author

This is super helpful. I will have to give it a try after this print is done.

…

On Wed, Oct 6, 2021 at 8:13 PM jneilliii ***@***.***> wrote: Did you try parameters? https://klipper.discourse.group/t/macro-creation-tutorial/30/4 [gcode_macro BABYZ] SET_GCODE_OFFSET Z_ADJUST=S{ params.babystep } MOVE=1 then set the config.json value to BABYZ babystep=. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2321 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODV435BYJAPX4QTYV4FDUFUF3XANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

2 replies

jneilliii Oct 7, 2021

make sure you catch my edit on github, what was emailed was slightly wrong....

antlestxp Oct 7, 2021
Author

caught your edit

antlestxp · 2021-10-07T16:03:28Z

antlestxp
Oct 7, 2021
Author

with that code in play I get a different error

Error on 'SET_GCODE_OFFSET Z_ADJUST= MOVE=1': unable to parse

So it macro is understanding what to pickup but fails to inject the "0.01" or whatever octodash is suppose to append to the end of the gcode command

5 replies

jneilliii Oct 7, 2021

my bad, looks like I forgot a bit...

[gcode_macro BABYZ]
gcode:
	SET_GCODE_OFFSET Z_ADJUST={ params.babystep } MOVE=1

antlestxp Oct 7, 2021
Author

Oh saw that the "gcode:" was missing and added it before I updated my configuration. As it stands it doesn't import what octodash appends at the end of the command.

jneilliii Oct 7, 2021

Unfortunate, someone more knowledgeable to klipper would have to speak up on this I'm afraid. I've never used it before. They do have a discord though you may want to check out.

antlestxp Oct 7, 2021
Author

I appreciate all your help. I think you got me a pretty good head start

jneilliii Dec 4, 2021

so this came up again in the discord and we figured out if you use this command in config.json it will work.

SET_GCODE_OFFSET_ADJUST MOVE=1 Z=

antlestxp · 2021-12-04T17:04:50Z

antlestxp
Dec 4, 2021
Author

I will give it a try when I get home.

…

On Fri, Dec 3, 2021, 8:50 PM jneilliii ***@***.***> wrote: so this came up again in the discord and we figured out if you use this command in config.json it will work. SET_GCODE_OFFSET_ADJUST MOVE=1 Z= — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2321 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODVYTNODTRNPMCXEREEDUPGM2LANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

0 replies

antlestxp · 2021-12-11T01:03:41Z

antlestxp
Dec 11, 2021
Author

no dice. it doesn't respond and terminal spits out unknown command. my setup must have something wrong with it. i added "set_gcode_offset_adjust move=1 z= to the json with no macros in klipper. Unknown command:"SET_GCODE_OFFSET_ADJUST" this is what terminal spits out when a zstep is requested from octodash

…

On Sat, Dec 4, 2021 at 9:04 AM anthony lester ***@***.***> wrote: I will give it a try when I get home. On Fri, Dec 3, 2021, 8:50 PM jneilliii ***@***.***> wrote: > so this came up again in the discord and we figured out if you use this > command in config.json it will work. > > SET_GCODE_OFFSET_ADJUST MOVE=1 Z= > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#2321 (reply in thread)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AJLODVYTNODTRNPMCXEREEDUPGM2LANCNFSM5FNJ42FQ> > . > Triage notifications on the go with GitHub Mobile for iOS > <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> > or Android > <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. > >

1 reply

UnchartedBull Jan 17, 2022
Maintainer

SET_GCODE_OFFSET MOVE=1 Z_ADJUST= works for me as zBabystepGCode just in case this is still a problem

antlestxp · 2022-01-26T19:49:41Z

antlestxp
Jan 26, 2022
Author

sorry i was out of the country. Is there anything else that needs to be added to the klipper config or octoprint other than adjusting that line in the octodash json?

…

On Mon, Jan 17, 2022 at 8:58 AM Timon G. ***@***.***> wrote: SET_GCODE_OFFSET MOVE=1 Z_ADJUST= works for me as zBabystepGCode just in case this is still a problem — Reply to this email directly, view it on GitHub <#2321 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODV44PS4NEDR5ELTYBRLUWRDCTANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.***>

0 replies

Greysqrl · 2022-02-17T04:33:30Z

Greysqrl
Feb 17, 2022

It's working for me with the following macro:

[gcode_macro m290]
gcode:
SET_GCODE_OFFSET Z_ADJUST={params.Z|default(0.0)} MOVE=1

Be careful to indent the "SET_GCODE..." line properly by two spaces

With this a positive Babystep change on Octodash will raise the nozzle vice versa

0 replies

antlestxp · 2022-02-17T16:59:37Z

antlestxp
Feb 17, 2022
Author

It was the spaces!

…

On Wed, Feb 16, 2022 at 8:33 PM Greysqrl ***@***.***> wrote: It's working for me with the following macro: [gcode_macro m290] gcode: SET_GCODE_OFFSET Z_ADJUST={params.Z|default(0.0)} MOVE=1 Be careful to indent the "SET_GCODE..." line properly by two spaces With this a positive Babystep change on Octodash will raise the nozzle vice versa — Reply to this email directly, view it on GitHub <#2321 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJLODV5EPDNJA2RD3L6ZS23U3R3CLANCNFSM5FNJ42FQ> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.***>

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

babystepping with klipper #2321

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 13 comments 8 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

babystepping with klipper #2321

Replies: 13 comments · 8 replies

antlestxp Oct 6, 2021 Author

antlestxp Oct 6, 2021 Author

antlestxp Oct 7, 2021 Author

antlestxp Oct 7, 2021 Author

antlestxp Oct 7, 2021 Author

antlestxp Oct 7, 2021 Author

antlestxp Oct 7, 2021 Author

antlestxp Oct 7, 2021 Author

antlestxp Dec 4, 2021 Author

antlestxp Dec 11, 2021 Author

UnchartedBull Jan 17, 2022 Maintainer

antlestxp Jan 26, 2022 Author

antlestxp Feb 17, 2022 Author

Replies: 13 comments 8 replies

antlestxp
Oct 6, 2021
Author

antlestxp
Oct 6, 2021
Author

antlestxp
Oct 7, 2021
Author

antlestxp
Oct 7, 2021
Author

antlestxp Oct 7, 2021
Author

antlestxp
Oct 7, 2021
Author

antlestxp Oct 7, 2021
Author

antlestxp Oct 7, 2021
Author

antlestxp
Dec 4, 2021
Author

antlestxp
Dec 11, 2021
Author

UnchartedBull Jan 17, 2022
Maintainer

antlestxp
Jan 26, 2022
Author

antlestxp
Feb 17, 2022
Author