Robot Setup Instructions #4
Replies: 6 comments 9 replies
-
Hello The issue I see is that there is no response from the controller The code line that fails is this |
Beta Was this translation helpful? Give feedback.
-
I see the ping going out
Sent from Mail for Windows
From: Austen Seamans
Sent: Tuesday, March 19, 2024 17:28
To: Yaskawa-Global/YMConnect
Cc: RubyAI132; Comment
Subject: Re: [Yaskawa-Global/YMConnect] Robot Setup Instructions (Discussion #4)
Hello,
Are you seeing any network packets at all when you start your program? It's interesting if there are no packets that even try to get sent out from YMConnect.
-Austen
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
The ping has nothing to do with Hello YMConnect, it’s a sanity test I do to the setup.
When I run just YMConnect there is nothing going out.
I also use the controller High speed ethernet error log utility and don’t see any activity
Tank you
Sent from Mail for Windows
From: Austen Seamans
Sent: Tuesday, March 19, 2024 19:50
To: Yaskawa-Global/YMConnect
Cc: RubyAI132; Comment
Subject: Re: [Yaskawa-Global/YMConnect] Robot Setup Instructions (Discussion #4)
By ping do you mean the initial packets sent from the "Hello YMConnect" sample code?
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hello see attached packet dump
The controller is 192.168.100.1
And PC is 192.168.100.77
Sent from Mail for Windows
From: Austen Seamans
Sent: Tuesday, 19 March 2024 19:58
To: Yaskawa-Global/YMConnect
Cc: RubyAI132; Comment
Subject: Re: [Yaskawa-Global/YMConnect] Robot Setup Instructions (Discussion#4)
Also, if you can provide a cmos.bin of your controller, the packet capture that you are seeing and the IP addresses for your pc and the controller, I can try to replicate your issue.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hello
The attached archive has the COMS.BIN and the packet dump
I send ping prior to starting the YMC Hello World
The dump period includes both the ping and the YMC Hello World until failing
The controller ip is 192.168.100.1
And PC is 192.168.100.77
Thank you for helping
Sent from Mail for Windows
From: Austen Seamans
Sent: Tuesday, 19 March 2024 19:58
To: Yaskawa-Global/YMConnect
Cc: RubyAI132; Comment
Subject: Re: [Yaskawa-Global/YMConnect] Robot Setup Instructions (Discussion#4)
Also, if you can provide a cmos.bin of your controller, the packet capture that you are seeing and the IP addresses for your pc and the controller, I can try to replicate your issue.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
This discussion board is a bit off topic. I've opened a new one here: #7 |
Beta Was this translation helpful? Give feedback.
-
@aseamans, I just realized that the robot setup instructions are not included in the documentation. Lets create a page for that and provide a link in this discussion.
Beta Was this translation helpful? Give feedback.
All reactions