Skip to content

Fork of DTS's personal config, to be adapted and standardized.

License

Notifications You must be signed in to change notification settings

alexfornuto/desktop-configuration

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 

Repository files navigation

Desktop Configuration

  • Current distribution: Fedora 27
  • Current hardware: ThinkPad T580

Data to Back Up

  • ~/.gnupg/
  • ~/.password-store/
  • ~/.gitconfig

Machine Setup

  1. Initialize a thumb drive using the Fedora Media Writer.

  2. Boot to the USB drive.

  3. Reclaim disk space. Disk encryption is good; I use Opal from my ThinkPad BIOS setup, but you can use LUKS. I prefer Opal because GNOME Software Center updates require two reboots, and Opal can persist across reboots.

  4. Set up a single admin user (no password set for root).

  5. Reboot into the newly installed Fedora.

  6. If installed from a Live ISO, update Fedora using the GNOME Software Center. (A direct dnf upgrade can, rarely, cause issues.)

  7. Configure the GNOME desktop:

    gsettings set org.gnome.desktop.input-sources xkb-options "['caps:ctrl_modifier']"  # Use Caps Lock as Ctrl
    gsettings set org.gnome.mutter dynamic-workspaces false  # Use static workspaces.
    gsettings set org.gnome.desktop.wm.preferences num-workspaces 1  # Disable all workspace functionality.
    gsettings set org.gnome.desktop.interface clock-show-seconds true
    gsettings set org.gnome.desktop.interface clock-show-date true
    gsettings set org.gnome.desktop.peripherals.mouse natural-scroll true  # Use Apple-style natural scrolling.
    gsettings set org.gnome.shell enabled-extensions "[]"  # Disable the Fedora desktop logo.
    gsettings set org.gnome.desktop.interface clock-show-date true # Show date in the status bar.
    
    # Terminal:
    gsettings set "org.gnome.Terminal.Legacy.Keybindings:/org/gnome/terminal/legacy/keybindings/" reset-and-clear 'F12'  # Set F12 to Reset and Clear
    TPROFILE=$(gsettings get org.gnome.Terminal.ProfilesList default | tr --delete "'")
    gsettings set "org.gnome.Terminal.Legacy.Profile:/org/gnome/terminal/legacy/profiles:/:$TPROFILE/" scrollback-unlimited true  # Enable unlimited scrollback.
    
  8. Install Google Chrome:

    sudo dnf install https://dl.google.com/linux/direct/google-chrome-stable_current_x86_64.rpm
    
  9. Add RPM Fusion repositories:

    sudo dnf install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm
    
  10. Install other packages:

    sudo dnf install gimp htop inkscape iotop mariadb meld nano php-cli powertop quassel-client tor unbound wireshark-gnome transmission gnome-system-log fatsort nmap-frontend pass ghex composer gnome-builder libvirt-daemon-config-network chrome-gnome-shell

  11. Set the editor (in this case, nano, but anything will work):

    mkdir -p ~/.config/environment.d/ echo "EDITOR=nano" > ~/.config/environment.d/50-editor.conf

  12. Add the Caffeine GNOME Shell extension.

  13. Configure git:

    git config --global user.name "David Strauss" git config --global user.email [email protected] git config --global color.ui auto

Smart Cards

Tested Hardware

Machine Setup

  1. Disable the GNOME Keyring SSH agent by overriding the desktop file:

    mkdir -p ~/.config/autostart/
    
    cat <<EOT >> ~/.config/autostart/gnome-keyring-ssh.desktop
    [Desktop Entry]
    Type=Application
    Name=SSH Key Agent
    Exec=/usr/bin/true
    Hidden=true
    EOT
    
  2. Redirect sessions to use the GPG agent for SSH:

    mkdir -p ~/.config/environment.d/
    
    cat <<EOT >> ~/.config/environment.d/50-ssh-agent.conf
    SSH_AGENT_PID=
    SSH_AUTH_SOCK=${XDG_RUNTIME_DIR}/gnupg/S.gpg-agent.ssh
    EOT
    
  3. Add a user service and corresponding sockets for the GPG agent:

    mkdir -p ~/.config/systemd/user/
    
    cat <<EOT >> ~/.config/systemd/user/gpg-agent.service
    [Service]
    ExecStart=/usr/bin/gpg-agent --supervised --enable-ssh-support
    ExecReload=/usr/bin/gpgconf --reload gpg-agent
    EOT
    
    cat <<EOT >> ~/.config/systemd/user/gpg-agent.socket
    [Socket]
    ListenStream=%t/gnupg/S.gpg-agent
    FileDescriptorName=std
    SocketMode=0600
    DirectoryMode=0700
    
    [Install]
    WantedBy=sockets.target
    EOT
    
    cat <<EOT >> ~/.config/systemd/user/gpg-agent-ssh.socket
    [Socket]
    ListenStream=%t/gnupg/S.gpg-agent.ssh
    FileDescriptorName=ssh
    Service=gpg-agent.service
    SocketMode=0600
    DirectoryMode=0700
    
    [Install]
    WantedBy=sockets.target
    EOT
    
    systemctl --user enable --now gpg-agent.socket gpg-agent-ssh.socket
    

Using an Existing Smart Card

  1. Complete machine setup (above).

  2. Import any existing smart card keys (that were set up according to the directions below):

    gpg2 --card-edit
    > fetch
    > quit
    gpg2 --card-status
    
  3. Import any other keys:

    gpg2 --keyserver keys.gnupg.net --recv-key $KEYID
    gpg2 --keyserver pool.sks-keyservers.net --recv-key $KEYID  # Another database to try.
    gpg2 --keyserver pgp.mit.edu --recv-key $KEYID  # Another database to try.
    
  4. Add trust to any necessary keys:

    gpg2 --edit-key $KEYID
    gpg> trust
    Your decision? 5
    gpg> quit
    

Setting Up a New Smart Card

  1. Complete machine setup (above).

  2. Install the personalization tool:

    sudo dnf install ykpers
    
  3. If the smart card is a YubiKey Neo or YubiKey 4, set the card's mode:

     ykpersonalize -m86
    
  4. Configure the card, generate a key pair, and upload the key:

    gpg2 --change-pin  # Change both the PIN (default is 123456)
                       # and the Admin PIN (default is 12345678).
                       # I use pwgen for the admin PIN.
    gpg2 --card-edit
    gpg/card> admin
    gpg/card> generate # No off-card key backup.
                       # Use a key size of 3072 for everything on YubiKey 4. Default is fine for NEO.
                       # No expiration.
                       # Back up the .rev file.
    gpg/card> quit  # GPG will then print out data, including the key fingerprint
                    # as a long, alphanumeric string.
    gpg2 --keyserver hkps://keys.gnupg.net --send-keys $FINGERPRINT
    gpg2 --keyserver hkp://pool.sks-keyservers.net --send-keys $FINGERPRINT
    gpg2 --keyserver hkp://pgp.mit.edu --send-keys $FINGERPRINT
    

    Note: Revocation certificates are backed up to ~/.gnupg/openpgp-revocs.d

  5. Display the public key in OpenSSH format:

    ssh-add -L
    
  6. Optionally, export the "secret key," which will only be a stub (not the actual key, which is not obtainable):

    gpg2 --export-secret-key --armor $FINGERPRINT > $FINGERPRINT.asc  # Back this up, too.
    
  7. After this is finished, the card should work. You should also have $FINGERPRINT.asc and $FINGERPRINT.rev backed up. Google Drive and Dropbox are fine for this backup; these files cannot be used to impersonate you.

Testing and Troubleshooting the Setup

When there's an issue, we can narrow the problem down to an individual component or connection.

  • Test that the GPG agent is running and accessible (after an attempt at use):

     systemctl --user status gpg-agent.service
     ls -l $SSH_AUTH_SOCK
    
     # Optionally, stop it (which will cause reinitialization on use):
     systemctl --user stop gpg-agent.service
    
  • Test that the standard PIN counter hasn't been exhausted. It's the first number returned here:

     gpg2 --card-status|grep "PIN retry counter"
    
    • If the standard PIN counter has been exhausted, it's possible to unblock (using gpg2 --card-edit with passwd) as long as the third number (the mangement/admin PIN retry counter) wasn't also zero.

    • If even the management/admin PIN is exhausted, then the entire GPG module needs to be reset: YubiKey instructions

  • Test the GPG-to-smart card connection and key trust. The following should prompt for the regular PIN and succeed:

     FINGERPRINT=`gpg2 --card-status | grep "General key info" | grep -o "/[[:alnum:]]* " | grep -o "[[:alnum:]]*"`
     echo "test" | gpg2 --sign --armor --local-user $FINGERPRINT
    
  • Test the OpenSSH client's connection to the GPG agent. The following should output the SSH public key:

     ssh-add -L
    

One-Time or Test Usage of the Agent

  1. Open a terminal.

  2. If you're restarted your computer since using the agent, start it:

    gpg-agent --daemon --enable-ssh-support
    
  3. In any shell where you want to use it, point OpenSSH to the GPG agent:

    export SSH_AUTH_SOCK=${XDG_RUNTIME_DIR}/gnupg/S.gpg-agent.ssh  # Or use the line shown in the output of starting the GPG agent
    

Revoking a Key

  1. If the key isn't imported locally, follow the "Using an Existing Smart Card" steps first (but skipping the "trust" step).

  2. If you don't have the revocation certificate (.rev) backed up but have the private key:

    gpg2 --gen-revoke --output=$FINGERPRINT.rev $FINGERPRINT
    
  3. Import the revocation:

    gpg2 --import $FINGERPRINT.rev  # May need to remove colon before the five dashes from file.
    
  4. Publish the revocation:

    gpg2 --keyserver hkps://keys.gnupg.net --send-keys $FINGERPRINT
    gpg2 --keyserver hkps://hkps.pool.sks-keyservers.net --send-keys $FINGERPRINT
    gpg2 --keyserver hkp://pgp.mit.edu --send-keys $FINGERPRINT
    

Go Development

  1. Install packages:

    sudo dnf install golang
    
  2. Add Go to the path:

    mkdir -p ~/.config/environment.d/
    cat <<EOT >> ~/.config/environment.d/50-golang.conf
    GOPATH=\$HOME/go
    PATH=\$PATH:\$GOROOT/bin:\$GOPATH/bin
    EOT
    

PHP Development

  1. Install packages:

    sudo dnf install -y nginx mariadb mariadb-server php php-fpm php-mysqlnd php-dbg php-cli php-bcmath php-phpass php-mbstring php-opcache php-gd php-pecl-apcu php-pecl-xdebug
    
  2. Install, start, and configure the database:

    sudo systemctl start mariadb
    mysql_secure_installation
    
  3. Create a directory for web projects (and enable web server access to directories of that type):

    chmod 711 ~
    mkdir ~/public_html
    sudo setsebool -P httpd_enable_homedirs 1    # Enables use of ~/public_html by nginx and PHP-FPM.
    sudo setsebool -P httpd_execmem 1            # Enables PHP's regex compilation.
    sudo setsebool -P httpd_builtin_scripting 1  # Hope to fix: https://bugzilla.redhat.com/show_bug.cgi?id=1510717
    sudo setsebool -P httpd_unified 1            # Same here.
    sudo setsebool -P httpd_enable_cgi 1         # Same here.
    
  4. Add support for ~/public_html to nginx using /etc/nginx/default.d/userdir.conf:

    location @drupal {
        error_log /var/log/nginx/userdir.log notice;
        #rewrite_log on;
        rewrite ^/~([^/]+)/([^/]+)(.*)\?(.*)$ /~$1/$2/index.php?q=$3&$4;
        rewrite ^/~([^/]+)/([^/]+)(/.*?)$ /~$1/$2/index.php?q=$3;
    }
    
    location ^~ /~ {
        error_log /var/log/nginx/userdir.log notice;
    
        location ~ ^/~(?<username>[^/]+)(?<path>/.+\.php)$ {
            root /home/$username/public_html;
            try_files $path =404;
            fastcgi_index  index.php;
            include        fastcgi_params;
            fastcgi_param  SCRIPT_FILENAME  $document_root$path;
            fastcgi_param  SCRIPT_NAME      /~$username$path;
            fastcgi_pass   php-fpm;
        }
    
        location ~ ^/~(?<username>[^/]+)(?<path>/.+?)?$ {
            root /home/$username/public_html;
            try_files $path @drupal;
        }
    }
    
  5. Configure some PHP-related options:

    echo "apc.rfc1867=1" | sudo tee -a /etc/php.d/40-apcu.ini  # Upload progress tracking.
    
  6. Start services for development (each time they're needed):

    sudo systemctl start mariadb php-fpm nginx
    
  7. Use ~/public_html/$PROJECT/ as the web root, accessible via http://localhost/~$USER/$PROJECT/.

  8. If new files with the wrong context get added, fix the selinux context:

    restorecon -R ~/public_html
    

Dwarf Fortress

  1. Download the latest archive.

  2. Install necessary packages:

    sudo dnf install -y SDL.i686 SDL_image.i686 SDL_ttf.i686 mesa-libGLU.i686 gtk2.i686 zlib.i686 openal-soft.i686 xterm python qt qt-x11 bzip2 xorg-x11-fonts-Type1
    
  3. Launch with startlnp

  4. Use xterm -e as the custom terminal command configuration.

OpenRA

  1. Download the binary package for the current release.

  2. Install the RPM using Software Center or DNF (in order to install dependencies).

BIOS Updates

First, acquire the update. For ThinkPads, use Lenovo's My Products tool, click on the product model (after adding yours), then Top Downloads > View All, and finally the "Bootable CD" ISO.

USB Thumb Drive Method

  1. Install the conversion utility:

    sudo dnf install geteltorito
    
  2. Write it to a USB drive:

    geteltorito -o update.img downloaded.iso
    
  3. Open the update.img in the Disks utility and restore it to the USB drive.

  4. Boot from that drive.

GRUB2 EFI Chainloader Method

  1. First Time: Setup:

    sudo dnf install syslinux p7zip p7zip-plugins
    
    ESPUUID=`sudo grub2-probe --target=fs_uuid /boot/efi/`
    cat >> 40_custom <<EOF
    menuentry "Firmware Update" {
        insmod fat
        insmod part_gpt
        insmod chain
        insmod search_fs_uuid
        search --fs-uuid $ESPUUID
        chainloader /LenovoEFI/Boot/BootX64.efi
    }
    EOF
    
    sudo mv 40_custom /etc/grub.d/40_custom
    sudo grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
    
  2. Every Time: Extract the update to appropriate places in the EFI partition:

    geteltorito -o eltorito.img downloaded.iso
    7z x -oeltorito/ eltorito.img
    sudo rsync --recursive --delete --verbose eltorito/Flash/ /boot/efi/Flash/
    sudo rsync --recursive --delete --verbose eltorito/EFI/ /boot/efi/LenovoEFI/
    
  3. Every Time: Reboot and select "Firmware Update."

Crash Reporting

  • Reconfigure using system-config-abrt

Other Resources

About

Fork of DTS's personal config, to be adapted and standardized.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published