Skip to content

Latest commit

 

History

History
604 lines (489 loc) · 24.4 KB

advanced-topics.md

File metadata and controls

604 lines (489 loc) · 24.4 KB

Advanced Topics

Secured access to the Context Broker

For access to instances of the Context Broker secured with a PEP Proxy, an authentication mechanism based in Keystone Trust tokens is provided. A trust token is a way of Keystone to allow an user delegates a role to another user for a subservice. It is a long-term token that can be issued by any user to give another user permissions to impersonate him with a given role in a given project (subservice). Such impersonation itself is in turn based on a short-term access token.

For the authentication mechanisms to work, the authentication attribute in the configuration has to be fully configured, and the authentication.enabled subattribute should have the value true.

When the administrator of a service is configuring a set of devices or device types in the IoT Agent to use a secured Context Broker, he should follow this steps:

  • First, a Trust Token ID should be requested to Keystone, using the service administrator credentials, the role ID and the IoT Agent User ID. The Trust token can be retrieved using the following request (shown as a curl command):
curl http://${KEYSTONE_HOST}/v3/OS-TRUST/trusts \
    -s \
    -H "X-Auth-Token: $ADMIN_TOKEN" \
    -H "Content-Type: application/json" \
    -d '
{
    "trust": {
        "impersonation": false,
        "project_id": "'$SUBSERVICE_ID'",
        "roles": [
            {"id": "'$ID_ROLE'"
            }
        ],
        "trustee_user_id": "'$ID_IOTAGENT_USER'",
        "trustor_user_id": "'$ID_ADM1'"
    }
}'
  • Every device or type of devices configured to use a secured Context Broker must be provided with a Trust Token ID in its configuration.
  • Before any request is sent to a secured Context Broker, the IoT Agent uses the Trust Token ID to generate a temporary access token, that is attached to the request (in the X-Auth-token header) (using Keystone API https://developer.openstack.org/api-ref/identity/v3-ext/#consuming-a-trust).

Apart from the generation of the trust, the use of secured Context Brokers should be transparent to the user of the IoT Agent.

Complete info on Keystone trust tokens could be found at:

NGSI-LD GeoProperty support

For NGSI-LD only, the defined type of any GeoJSON attribute can be any set using any of the standard NGSI-v2 GeoJSON types - (e.g. geo:json, geo:point). NGSI-LD formats such as GeoProperty, Point and LineString are also accepted type values. If the latitude and longitude are received as separate measures, the JEXL or legacy expression language can be used to concatenate them into GeoJSON objects an array of tuples or a string as shown

Legacy - encode as String

{
    "entity_type": "GPS",
    "resource":    "/iot/d",
    "protocol":    "PDI-IoTA-JSON",
..etc
    "attributes": [
        {
            "name": "location",
            "type": "geo:json",
            "expression": "${@lng}, ${@lat}"
        }
    ]
}

JEXL - encode as GeoJSON

{
    "entity_type": "GPS",
    "resource":    "/iot/d",
    "protocol":    "PDI-IoTA-JSON",
    "expressionLanguage": "jexl",
..etc
    "attributes": [
        {
            "name": "location",
            "type": "geo:json",
            "expression": "{coordinates: [longitude,latitude], type: 'Point'}"
        }
    ]
}

JEXL can be used to create GeoJSON objects directly. The Legacy expression language does not support GeoJSON. However, there is a workaround specifically for NGSI-LD Entities which always require location to be encoded as GeoJSON. For attributes and static_attributes which need to be formatted as GeoJSON values, three separate input formats are currently accepted. Provided the type is provisioned correctly, the value may be defined using any of the following formats:

  • a comma delimited string
{
    "name": "location",
    "value": "23, 12.5"
}
  • an array of numbers
{
    "name": "location",
    "value": [23, 12.5]
}
  • an fully formatted GeoJSON object
{
    "name": "location",
    "value": {
        "type": "Point",
        "coordinates": [23, 12.5]
    }
}

Metadata support

Both attributes and static_attributes may be supplied with metadata when provisioning an IoT Agent, so that the units of measurement can be placed into the resultant entity.

e.g.:

{
     "entity_type": "Lamp",
     "resource":    "/iot/d",
     "protocol":    "PDI-IoTA-UltraLight",
..etc
     "commands": [
        {"name": "on","type": "command"},
        {"name": "off","type": "command"}
     ],
     "attributes": [
        {"object_id": "s", "name": "state", "type":"Text"},
        {"object_id": "l", "name": "luminosity", "type":"Integer",
          "metadata":{
              "unitCode":{"type": "Text", "value" :"CAL"}
          }
        }
     ],
     "static_attributes": [
          {"name": "category", "type":"Text", "value": ["actuator","sensor"]},
          {"name": "controlledProperty", "type": "Text", "value": ["light"],
            "metadata":{
              "includes":{"type": "Text", "value" :["state", "luminosity"]},
              "alias":{"type": "Text", "value" :"lamp"}
            }
          },
     ]
   }

NGSI-LD data and metadata considerations

When provisioning devices for an NGSI-LD Context Broker, type values should typically correspond to one of the following:

  • Property, Relationship, GeoProperty, LanguageProperty
  • Native JSON types (e.g. String, Boolean, Float , Integer Number)
  • Temporal Properties (e.g. Datetime, Date , Time)
  • GeoJSON types (e.g Point, LineString, Polygon, MultiPoint, MultiLineString, MultiPolygon)

Most NGSI-LD attributes are sent to the Context Broker as properties. If a GeoJSON type or native JSON type is defined, the data will be converted to the appropriate type. Temporal properties should always be expressed in UTC, using ISO 8601. This ISO 8601 conversion is applied automatically for the observedAt property-of-a-property metadata where present.

Data for any attribute defined as a relationship must be a valid URN.

Note that when the unitCode metadata attribute is supplied in the provisioning data under NGSI-LD, the standard unitCode property-of-a-property String attribute is created.

Other unrecognised type attributes will be passed as NGSI-LD data using the following JSON-LD format:

    "<property_name>": {
       "type" : "Property",
       "value": {
          "@type":  "<property_type>",
          "@value":  { string or object}
      }
    }

null values will be passed in the following format:

     "<property_name>": {
       "type" : "Property",
       "value": {
          "@type":  "Intangible",
          "@value":  null
      }
    }

NGSI-LD Linked Data support

static_attributes may be supplied with an additional link data element when provisioning an IoT Agent to ensure that active attributes from the provisioned IoT Device may be maintained in parallel with a linked data entity . Take for example a temperature gauge placed within a building. The Device data model literally represents the IoT device itself, but the temperature attribute also needs to be shared with the Building entity

A link between them can be provisioned as shown:

e.g.:

{
     "entity_type": "Device",
     "resource":    "/iot/d",
     "protocol":    "PDI-IoTA-UltraLight",
..etc
     "attributes": [
        {"object_id": "l", "name": "temperature", "type":"Float",
          "metadata":{
              "unitCode":{"type": "Text", "value" :"CEL"}
          }
        }
     ],
     "static_attributes": [
        {
          "name": "controlledAsset",
          "type": "Relationship",
          "value": "urn:ngsi-ld:Building:001",
          "link": {
             "attributes": ["temperature"],
             "name": "providedBy",
             "type": "Building"
          }
        }
     ]
  }

Whenever a temperature measure is received Device is updated, and entity urn:ngsi-ld:Building:001 is also updated as shown:

"temperature": {
    "type": "Property",
    "value": 27.6,
    "unitCode": "CEL",
    "providedBy": {
        "type": "Relationship",
        "object": "urn:ngsi-ld:Device:thermometer1"
    }
}

Autoprovision configuration (autoprovision)

By default, when a measure arrives to the IoTAgent, if the device_id does not match with an existing one, then, the IoTA creates a new device and a new entity according to the group config. Defining the field autoprovision to false when provisioning the device group, the IoTA to reject the measure at the southbound, allowing only to persist the data to devices that are already provisioned. It makes no sense to use this field in device provisioning since it is intended to avoid provisioning devices (and for it to be effective, it would have to be provisional).

Explicitly defined attributes (explicitAttrs)

If a given measure element (object_id) is not defined in the mappings of the device or group provision, the measure is stored in the Context Broker by adding a new attribute to the entity with the same name of the undefined measure element. By adding the field explicitAttrs with true value to device or group provision, the IoTAgent rejects the measure elements that are not defined in the mappings of device or group provision, persisting only the one defined in the mappings of the provision. If explicitAttrs is provided both at device and group level, the device level takes precedence. Additionally explicitAttrs can be used to define which meassures (identified by their attribute names, not by their object_id) defined in JSON/JEXL array will be propagated to NGSI interface.

The different possibilities are summarized below:

Case 1 (default):

"explicitAttrs": false

every measure will be propagated to NGSI interface.

Case 2:

"explicitAttrs": true

just measures defined in active, static (plus conditionally TimeInstant) will be propagated to NGSI interface.

Case 3:

"explicitAttrs": "['attr1','atrr2']"

just NGSI attributes defined in the array (identified by their attribute names, not by their object_id, plus conditionally TimeInstant) will be propagated to NGSI interface (note that in this case the value of explicitAttrs is not a JSON but a JEXL Array that looks likes a JSON).

Case 4:

"explicitAttrs": "['attr1','atrr2',{object_id:'active_id'}]"

just NGSI attributes defined in the array (identified by their attribute names and/or by their object_id) will be propagated to NGSI interface (note that in this case the value of explicitAttrs is not a JSON but a JEXL Array/Object that looks likes a JSON). This is necessary when same attribute names are used within multiple entities.

Case 5:

"explicitAtttr": "<JEXL expression resulting in bool or array>"

depending on the JEXL expression evaluation:

  • If it evaluates to true every measure will be propagated to NGSI interface (as in case 1)
  • If it evaluates to false just measures defined in active, static (plus conditionally TimeInstant) will be propagated to NGSI interface (as in case 2)
  • If it evaluates to an array just measures defined in the array (identified by their attribute names, not by their object_id) will be will be propagated to NGSI interface (as in case 3)

Configuring operation to persist the data in Context Broker (appendMode)

This is a flag that can be enabled by activating the parameter appendMode in the configuration file or by using the IOTA_APPEND_MODE environment variable (more info here). If this flag is activated, the update requests to the Context Broker will be performed always with APPEND type, instead of the default UPDATE. This have implications in the use of attributes with Context Providers, so this flag should be used with care.

Data mapping plugins

The IoT Agent Library provides a plugin mechanism in order to facilitate reusing code that makes small transformations on incoming data (both from the device and from the context consumers). This mechanism is based in the use of middlewares, i.e.: small pieces of code that receive and return an entity, making as many changes as they need, but taking care of returning a valid entity, that can be used as the input for other middlewares; this way, all those pieces of code can be chained together in order to make all the needed transformations in the target entity.

There are two kinds of middlewares: updateContext middlewares and queryContext middlewares. The updateContext middlewares are applied before the information is sent to the Context Broker, modifiying the entity before it is sent to Orion. The queryContext middlewares are applied on the received data, whenever the IoT Agent queries the Context Broker for information. I.e.: both middlewares will be automatically applied whenever the update() or query() functions are called in the library.

All the middlewares have the opportunity to break the chain of middleware applications by calling the callback() with an error object (the usual convention). If any of the updateContext middlewares raise an error, no request will be sent to the Context Broker. On the other hand, the queryContext request is always performed, but the call to the query() function will end up in an error if any of the queryContext middlewares report an error.

Development

All the middlewares have the same signature:

function middlewareName(entity, typeInformation, callback) {}

The arguments for any middleware are the NGSI data over which it can operate:

  • An updateContext payload in the case of an updateContext middleware and a queryContext payload otherwise;
  • a typeInformation object containing all the information about the device stored during registration.
  • and the customary callback parameter, with the usual meaning. It's really important for the library user to call this callback, as failing to do so may hang the IoT Agent completely. The callback must be called with the an optional error in the first argument and the same arguments received (potentially modified) as the following.

In order to manage the middlewares to the system, the following functions can be used:

  • addUpdateMiddleware: adds an updateContext middleware to the stack of middlewares. All the middlewares will be applied to every call to the update() function. The final payload of the updateContext request will be the result of applying all this middlewares in the order they have been defined.

  • addQueryMiddleware: adds a queryContext middleware to the stack of middlewares. All the middlewares will be applied to every call to the query() function.

  • resetMiddlewares: remove all the middlewares from the system.

Usually, the full list of middlewares an IoT Agent will use would be added in the IoTAgent start sequence, so they should not change a lot during the IoT lifetime.

Provided plugins

The library provides some plugins out of the box, in the dataPlugins collection. In order to load any of them, just use the addQueryMiddleware and addUpdateMiddleware functions with the selected plugin, as in the example:

var iotaLib = require('iotagent-node-lib');

iotaLib.addUpdateMiddleware(iotaLib.dataPlugins.compressTimestamp.update);
iotaLib.addQueryMiddleware(iotaLib.dataPlugins.compressTimestamp.query);
Timestamp Compression plugin (compressTimestamp)

This plugins change all the timestamp attributes found in the entity, and all the timestamp metadata found in any attribute, from the basic complete calendar timestamp of the ISO8601 (e.g.: 20071103T131805) to the extended complete calendar timestamp (e.g.: +002007-11-03T13:18). The middleware expects to receive the basic format in updates and return it in queries (and viceversa, receive the extended one in queries and return it in updates).

Attribute Alias plugin (attributeAlias)

In the Device provision, an ID can be specified for each attribute, along with its name. The ID can be used then as the left part of a mapping from attribute names in the south bound to attribute names in the North Bound. If the ID and name attributes are used in this way, this plugin makes the translation from one to the other automatically.

Event plugin (addEvents)

This plugin allows for the creation of Event attributes, i.e.: attributes whose value will be the timestamp of its inclusion in the system, regardless of the value they carried in the Southbound API. If this plugin is active, all the events in the IoT Agent with the configured type name will be marked as events. The event name can be configured in the config.eventType attribute.

Timestamp Processing Plugin (timestampProcess)

This plugin processes the entity attributes looking for a TimeInstant attribute. If one is found, for NGSI v2, the plugin adds a TimeInstant attribute as metadata for every other attribute in the same request. With NGSI-LD, the Standard observedAt property-of-a-property is used instead.

Expression Translation plugin (expressionTransformation)

This plugin allows the devices and configurations that have defined expressions to generate their values from those expressions and the reported measure information.

For further information on how the expressions work, refer to the Expression Language Reference.

Multientity plugin (multiEntity)

Allows the devices provisioned in the IoTAgent to map their attributes to more than one entity, declaring the target entity through the Configuration or Device provisioning APIs.

{
    "devices": [
        {
            "protocol": "IoTA-UL",
            "entity_name": "urn:ngsi-ld:Device:contador12",
            "entity_type": "multientity",
            "attributes": [
                {
                    "object_id": "cont1",
                    "name": "vol",
                    "type": "Text",
                    "entity_name": "urn:ngsi-ld:Device:WaterMeterSoria01",
                    "entity_type": "WaterMeter"
                },
                {
                    "object_id": "cont2",
                    "name": "vol",
                    "type": "Text",
                    "entity_name": "urn:ngsi-ld:Device:WaterMeterSoria02",
                    "entity_type": "WaterMeter"
                },
                {
                    "object_id": "cont3",
                    "name": "vol",
                    "type": "Text",
                    "entity_name": "urn:ngsi-ld:Device:WaterMeterSoria03",
                    "entity_type": "WaterMeter"
                }
            ],
            "device_id": "contador12"
        }
    ]
}
Bidirectionality plugin (bidirectional)

This plugin allows the devices with composite values an expression to update the original values in the devices when the composite expressions are updated in the Context Broker. This behavior is achieved through the use of subscriptions.

IoTAs using this plugins should also define a notification handler to handle incoming values. This handler will be intercepted by the plugin, so the mapped values are included in the updated notification.

When a device is provisioned with bidirectional attributes, the IoTAgent subscribes to changes in that attribute. When a change notification for that attribute arrives to the IoTA, it applies the transformation defined in the device provisioning payload to the notification, and calls the underlying notification handler with the transformed entity including the value along with any metadata, and in the case of an NGSI-LD bidirectional attribute a datasetId if provided.

The following attributes section shows an example of the plugin configuration (using IOTA_AUTOCAST=false to avoid translation from geo:point to geo:json)

      "attributes": [
        {
          "name":"location",
          "type":"geo:point",
          "expression": "${@latitude}, ${@longitude}",
          "reverse": [
            {
              "object_id":"longitude",
              "type": "Text",
              "expression": "${trim(substr(@location, indexOf(@location, \",\") + 1, length(@location)))}"
            },
            {
              "object_id":"latitude",
              "type": "Text",
              "expression": "${trim(substr(@location, 0, indexOf(@location, \",\")))}"
            }
          ]
        }
      ],

For each attribute that would have bidirectionality, a new field reverse must be configured. This field will contain an array of fields that will be created based on the notifications content. The expression notification can contain any attribute of the same entity as the bidirectional attribute; declaring them in the expressions will add them to the subscription payload.

For each attribute in the reverse array, an expression must be defined to calculate its value based on the notification attributes. This value will be passed to the underlying protocol with the object_id name. Details about how the value is then progressed to the device are protocol-specific.

NGSI-LD datasetId support

Limited support for parsing the NGSI-LD datasetId attribute is included within the library. A series of sequential commands for a single attribute can be sent as an NGSI-LD notification as follows:

{
  "id": "urn:ngsi-ld:Notification:5fd0fa684eb81930c97005f3",
  "type": "Notification",
  "subscriptionId": "urn:ngsi-ld:Subscription:5fd0f69b4eb81930c97005db",
  "notifiedAt": "2020-12-09T16:25:12.193Z",
  "data": [
    {
      "lampColor": [
        {
          "type": "Property",
          "value": { "color": "green", "duration": "55 secs"},
          "datasetId": "urn:ngsi-ld:Sequence:do-this"
        },
        {
          "type": "Property",
          "value": {"color": "red", "duration": "10 secs"},
          "datasetId": "urn:ngsi-ld:Sequence:then-do-this"
        }
      ]
    }
  ]
}

This results in the following sequential array of attribute updates to be sent to the NotificationHandler of the IoT Agent itself:

[
  {
    "name": "lampColor",
    "type": "Property",
    "datasetId": "urn:ngsi-ld:Sequence:do-this",
    "metadata": {},
    "value": { "color": "green", "duration": "55 secs"}
  },
  {
    "name": "lampColor",
    "type": "Property",
    "datasetId": "urn:ngsi-ld:Sequence:then-do-this",
    "metadata": {},
    "value": {"color": "red", "duration": "10 secs"}
  }
]

A datasetId is also maintained for each new attribute defined in the reverse field.