You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am trying to detect an issue on right Joycon but so far no success.
I've seen some videos where fuses are faulty, this was checked and they are OK.
I also have one good right joycon for comparison and I found one difference so maybe there is someone here that could know more about this point on the picture.
On a working joycon i have 1.8V between GND and this TP and on this faulty one I have zero.
So does anyone know what is this TP related to so I could check further.
This is the SL/SR ribbon cable connector on the picture.
Thank you.
The text was updated successfully, but these errors were encountered:
Hi @scutunic I have the same issue. Not powering on, no "charging" not recognized in the rail. If i connect the rail and attach to the Switch, power is coming into the board and charging the battery.
I'm missing the 1.8V onto the COL (same pad as your) and if you flip the board and check the IC in the back it's a W something there should be also 1.8V but there's none except on a capacitor.
Hi,
Thank you for your comment.
No, I haven't been able to repair it so far. I am self learned and this is
where my knowledge ends :)
čet, 18. tra 2024. u 14:04 ZekiGr95 ***@***.***> napisao je:
Hi @scutunic <https://github.com/scutunic> I have the same issue. Not
powering on, no "charging" not recognized in the rail. If i connect the
rail and attach to the Switch, power is coming into the board and charging
the battery.
I'm missing the 1.8V onto the COL (same pad as your) and if you flip the
board and check the IC in the back it's a W something there should be also
1.8V but there's none except on a capacitor.
Have you managed to fix yours?
Thanks!
—
Reply to this email directly, view it on GitHub
<#152 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ARPAO4PRASBP3JJP76JTXKTY56ZF7AVCNFSM6AAAAABDIBP63KVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRTG4YDOMRWHA>
.
You are receiving this because you were mentioned.Message ID:
<dekuNukem/Nintendo_Switch_Reverse_Engineering/issues/152/2063707268@
github.com>
I am trying to detect an issue on right Joycon but so far no success.
![image](https://private-user-images.githubusercontent.com/73271153/304705430-b891b02a-4de0-434e-af8a-4e3c342170cb.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.zRD9LV-bSJwB-NtA1efR_28vQJidHuNBiNihG0apIgU)
I've seen some videos where fuses are faulty, this was checked and they are OK.
I also have one good right joycon for comparison and I found one difference so maybe there is someone here that could know more about this point on the picture.
On a working joycon i have 1.8V between GND and this TP and on this faulty one I have zero.
So does anyone know what is this TP related to so I could check further.
This is the SL/SR ribbon cable connector on the picture.
Thank you.
The text was updated successfully, but these errors were encountered: