Skip to content

Latest commit

 

History

History
192 lines (110 loc) · 6.82 KB

README.md

File metadata and controls

192 lines (110 loc) · 6.82 KB

NonBlockingRTTTL logo

License: MIT Github Releases

NonBlockingRTTTL

NonBlockingRTTTL is a non-blocking arduino library for playing RTTTL melodies. The library allows your program to read or write IOs pins while playing. Implementing "stop" or "next song" push buttons is really easy!

It's main features are:

  • Fully support the RTTTL format standard.
  • Support unofficial frequencies and tempo/beats per minutes
  • Really small increase in memory & code footprint compared to the usual blocking algorithm.

Status

Build:

Service Build Tests
AppVeyor Build status Tests status
Travis CI Build Status

Statistics:

AppVeyor Travic CI
Statistics Statistics

Purpose

Most code that can be found on the internet that "play" an RTTTL string is build this way: sequential calls to the tone() function followed by a call to the delay() function:

tone(pin, note1, duration1);
delay(note_delay1);
tone(pin, note2, duration2);
delay(note_delay2);
tone(pin, note3, duration3);
delay(note_delay3);
//etc...

This type of implementation might be good for robots but not for realtime application or projects that needs to monitor pins while the song is playing.

This library is non-blocking which make it suitable to be used by more advanced algorithm. The non-blocking RTTTL library is a port of the RTTTL example from the Tone library.

RTTTL format

The Ring Tone Text Transfer Language (RTTTL) audio format is an audio format for storing single tone (monolithic) melodies. Each melody is composed of successive tone frequencies.

The RTTTL format is human readable and usually more compressed than note & duration arrays which helps reduce its memory footprint.

The format is really suitable for embedded device that are limited in memory which can’t store PCM (wav) or even MP3 data.

Note that RTTTL can also be spelled RTTL (Ringtone Text Transfer Language). According to Samsung phones, a ringtone can also be spelled as a single word...

More information on the RTTTL format is available on its Wikipedia acticle.

Usage

The following instructions show how to use the library.

General

Call rtttl::begin() to setup the non-blocking RTTTL library then call rtttl::play() to update the library's state and play notes as required.

Use rtttl::done() or rtttl::isPlaying() to know if the library is done playing the given song. Anytime playing, one can call rtttl::stop() to stop playing the current song.

Define RTTTL_NONBLOCKING_INFO to enable the debugging of the library state on the serial port. Use NONBLOCKINGRTTTL_VERSION to read the current version of the library.

Play a melody:

The following example plays 3 melodies. The first melody is played for 5 seconds and stopped. The second and third melodies and played completely and then the program restart again.

#include <NonBlockingRtttl.h>
 
//project's contants
#define BUZZER_PIN 8
const char * tetris = "tetris:d=4,o=5,b=160:e6,8b,8c6,8d6,16e6,16d6,8c6,8b,a,8a,8c6,e6,8d6,8c6,b,8b,8c6,d6,e6,c6,a,2a,8p,d6,8f6,a6,8g6,8f6,e6,8e6,8c6,e6,8d6,8c6,b,8b,8c6,d6,e6,c6,a,a";
const char * arkanoid = "Arkanoid:d=4,o=5,b=140:8g6,16p,16g.6,2a#6,32p,8a6,8g6,8f6,8a6,2g6";
const char * mario = "mario:d=4,o=5,b=100:16e6,16e6,32p,8e6,16c6,8e6,8g6,8p,8g,8p,8c6,16p,8g,16p,8e,16p,8a,8b,16a#,8a,16g.,16e6,16g6,8a6,16f6,8g6,8e6,16c6,16d6,8b,16p,8c6,16p,8g,16p,8e,16p,8a,8b,16a#,8a,16g.,16e6,16g6,8a6,16f6,8g6,8e6,16c6,16d6,8b,8p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16g#,16a,16c6,16p,16a,16c6,16d6,8p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16c7,16p,16c7,16c7,p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16g#,16a,16c6,16p,16a,16c6,16d6,8p,16d#6,8p,16d6,8p,16c6";
byte songIndex = 0; //which song to play when the previous one finishes
 
void setup() {
  pinMode(BUZZER_PIN, OUTPUT);
 
  Serial.begin(115200);
  Serial.println();
}
 
void loop() {
  if ( !rtttl::isPlaying() )
  {
    if (songIndex == 0)
    {
      rtttl::begin(BUZZER_PIN, mario);
      songIndex++; //ready for next song
 
      //play for 5 sec then stop.
      //note: this is a blocking code section
      //used to demonstrate the use of stop()
      unsigned long start = millis();
      while( millis() - start < 5000 ) 
      {
        rtttl::play();
      }
      rtttl::stop();
      
    }
    else if (songIndex == 1)
    {
      rtttl::begin(BUZZER_PIN, arkanoid);
      songIndex++; //ready for next song
    }
    else if (songIndex == 2)
    {
      rtttl::begin(BUZZER_PIN, tetris);
      songIndex++; //ready for next song
    }
  }
  else
  {
    rtttl::play();
  }
}

Other samples

See the library examples for more details:

Building

Please refer to file INSTALL.md for details on how installing/building the application.

Platforms

NonBlockingRTTTL has been tested with the following platform:

  • Linux x86/x64
  • Windows x86/x64

Versioning

We use Semantic Versioning 2.0.0 for versioning. For the versions available, see the tags on this repository.

Authors

See also the list of contributors who participated in this project.

License

This project is licensed under the MIT License - see the LICENSE file for details