The final project for the "Advanced Operating Systems" course (CS6378) (taught by Ravi Prakash), in which we implement the Jajodia-Mutchler algorithm.
g++ --std=c++11 -pthread controller.cpp -o control
g++ -pthread --std=c++11 include/serversocket.cpp include/clientsocket.cpp include/socket.cpp server.cpp -o server
Activate the servers before the controller.
server_designation is an integer between [0, 7]. Update the ip address and ports in the servers object in the commons.h file.
./server <server_port> <server_designation>
./control
You must put in the external IP address in the commons.h file. You can use ifconfig to figure that out. When I run ifconfig on one of my servers, I get a response similar to what is shown below...
kgupta@ecelap261053 → ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet <***.***.***.***> netmask 255.255.240.0 broadcast <***.**.***.***>
inet6 <****::****:****:****:****> prefixlen 64 scopeid 0x20<link>
ether <**:**:**:**:**:**> txqueuelen 1000 (Ethernet)
RX packets 17 bytes 2613 (2.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 10 bytes 796 (796.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
That means that I use the inet value of eth0 for the server IP address, and any free port for the port number.
If you take this course in the future and you get this exact same assignment, then I gotchu covered fam.