This example demonstrates the operation of the I2C (HAL) resource for PSoC 6 MCU in Slave mode using callbacks

This code example demonstrates the privacy features available to users in Bluetooth 5.0 and above using ModusToolbox™ software.

This example demonstrates the use of SPI (HAL) resource for PSoC6 MCU in Master mode.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This code example demonstrates the use of the I2C resource in HAL in slave mode. The I2C slave is configured to receive command packets to control a user LED on the kit.

This code example demonstrates the use of a SPI (HAL) resource in slave mode. The SPI slave is configured to receive command packets to control an user LED on the kit.

This design implements a BLE FMP that consists of an IAS. FMP and IAS are BLE standard Profile and Service respectively, as defined by the Bluetooth SIG. The design uses LED to display the IAS alert level – no alert (LED OFF), mild alert (LED blinking), high alert (LED ON).

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829.

This code example demonstrates the implementation of the Bluetooth® LE Battery Service Client using the AIROC™ CYW20829 Bluetooth® chip and ModusToolbox™ software environment.

This code example demonstrates the implementation of a simple BLE GAP Peripheral - GATT Client with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs

This example uses a PWM resource and Smart I/O in PSoC 6 MCU to implement a ramping LED, where an LED gradually cycles through increasing and decreasing brightness levels. There is no CPU usage except for the initialization of PWM and Smart I/O.

This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829, and AIROC™ Wi-Fi & Bluetooth® combo SoC devices.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This example demonstrates how to configure and SPI and Smart I/O to implement the Inter-IC Sound (I2S) interface.

This empty application provides a template for creating applications using PSoC 6 devices.

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This is a minimal starter Dual-CPU application template for PSoC 6 MCU devices.