Hardware files for a custom Gamecube controller that uses Hall effect magnetic sensors to read the sticks. Based on PhobGCC.

Polyphonic synthesizer built with Teensy 4.0

A versatile packet-based system to control a fixed-wing drone aircraft from any PC, with attitude, heading, and system status feedback.

Soundscape on Teensy 4.0 and audio shield

Rust on the Teensy 4.0

Teensy/Arduino flight controller and stabilization for small-scale VTOL vehicles

Driver library for the MAX31865 RTD chip

A Teensy 4.0 based audio processor for Amateur Radio

Python API for an Open Source USB to CAN-BUS Interface.

Code and recap for Team TBS (McCormick Design Competition 2022)

Teensy 4.0 WS8211 LED Controller

Small arduino button project to control REAPER64

Teensy 4.0 Drum Pad

Simple TOSLINK to USB + S/PDIF receiver. Someday + HDMI ARC + HDMI CEC.

J1708_T4 is a network utility library that is compatible with the Teensy 4.x. It provides a basic UART commands for displaying, measuring, and sending traffic on an SAE J1708 bus. This code was written as part of my Master's Thesis on securing legacy HD networks.

Repository of our team, Parsec, for the CanSat Hungary 2024 competition.

This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).

Actively in development Teensy based effects unit with OLED GUI. Audio handled using Teensy Audio, effects written in faust (hopefully). GUI written using ADAFruit GFX for SSD1306 128x64

Zephyr OS on Teensy4.0 test playground.

Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield