Version 0.5.0.0 Adoption - Land Boldly and Return Safely

---

0.5.0.0 Adoption - Land Boldly and Return Safely

• 10 Feb 2022
• For Kerbal Space Program 1.12.3

Update patches

• rename
• add header
• add footer
• add :NEEDS
• add :FOR

Localization

• [en-us.cfg] Additions
  • #LETech-door-open = Doors open
  • #LETech-door-clos = Doors close
  • #LETech-door-togl = Door toggl
  • #LETech-light-open = Lights on
  • #LETech-light-on = Lights off
  • #LETech-light-off = Lights toggle
  • updates #24 - Localization - English (United States) <en-us.cfg>
  • updates #23 - Localization - Master

Part config updates

• General Changes
  • lint pass
  • formatting pass
  • drag cubes
  • thumbs
• [LETpod2m4k]
  • Command Pod
  • reduced [mass] from 5 to 3.6
  • mass = 5 vs 2.6 in mk1-3pod
  • replaced [ModuleAnimateGeneric] with [ModuleLight]
  • [ModuleCommand]
    • add [defaultControlPointDisplayName]
    • add reverse ControlPoint
    • add [hibernation]
    • add [ElectricCharge] = 0.05 consumption
  • [ModuleReactionWheel]
    • reduce [ElectricCharge] consumption from 1.2 to 0.45 (which matches the mk1-3 pod)
  • [ModuleScienceExperiment]
    • localize with stock #
  • [ModuleScienceContainer]
    • localize with stock #
  • Add [ModuleLiftingSurface]
• [LETlander2mX3]
  • Landing Pod
  • reduced [mass] from 2.75 to 1.75
    • mass = 2.75 vs 1.355 in mk2LanderCabin_v2
  • Updated
    • [ModuleAnimateGeneric] for lights
    • [crashTolerance] to 20 from 9 (matches mk2LanderCabin_v2)
    • [maxTemp] to 1200 from 1000 (matches mk2LanderCabin_v2)
  • [ModuleCommand]
    • add [defaultControlPointDisplayName]
    • add ControlPoint
      • Up
      • Forward
      • Reverse
    • add [hibernation]
    • add [ElectricCharge] = 0.05 consumption
  • [ModuleReactionWheel]
    • reduce [ElectricCharge] consumption from 0.75 to 0.45 (which matches the mk1-3 pod)
  • [ModuleScienceExperiment]
    • localize with stock #
  • [ModuleScienceContainer]
    • localize with stock #
  • Add [MonoPropellant] of 40 (to match mk2LanderCabin_v2)
• [LETleg1.cfg]
  • Landing Leg
  • updated [ModuleLight]
  • because of issues, used [ModuleAnimateGeneric] in place of
    • [ModuleLandingLeg]
    • [ModuleWheelBogey]
    • [ModuleWheelLock]
    • [ModuleWheelDeployment]
    • [ModuleWheelSuspension]
    • [ModuleWheelBase]
• [LETleg2.cfg]
  • Landing Leg
  • updated [ModuleLight]
  • because of issues, used [ModuleAnimateGeneric] in place of
    • [ModuleLandingLeg]
    • [ModuleWheelBogey]
    • [ModuleWheelLock]
    • [ModuleWheelDeployment]
    • [ModuleWheelSuspension]
    • [ModuleWheelBase]
• [LETchuteR1.cfg]
  • Radial Parachute
  • update tags
  • Add [preferredStage] = PARACHUTESTAGE
  • [bulkheadProfiles] removed size1 leaving srf
  • [ModuleParachute]
    • Updated [chuteMaxTemp] to 1600 from 650
    • Added [machHeatMultBase] = 0.5
    • Added [chuteThermalMassPerArea] = 0.08
• [LETchute1m.cfg]
  • Stack Parachute
  • update tags
  • Add [preferredStage] = PARACHUTESTAGE
  • [ModuleParachute]
    • Updated [chuteMaxTemp] to 1600 from 650
    • Added [machHeatMultBase] = 0.25
    • Added [chuteThermalMassPerArea] = 0.09
• [LETchute2m.cfg]
  • Stack Parachute
  • update tags
  • Add [preferredStage] = PARACHUTESTAGE
  • [ModuleParachute]
    • Updated [chuteMaxTemp] to 1600 from 650
    • Added [machHeatMultBase] = 0.25
    • Added [chuteThermalMassPerArea] = 0.09
• [LETladderD5m.cfg]
  • Telescoping ladder
  • Add
    • [emissiveConstant] = 0.08
    • Add [thermalMassModifier] = 3.0
• [LETladderD8m.cfg]
  • Telescoping ladder
  • Add
    • [emissiveConstant] = 0.08
    • Add [thermalMassModifier] = 3.0
• [LETladderF1m.cfg]
  • Radial (fixed) ladder
  • Add
    • [emissiveConstant] = 0.08
    • Add [thermalMassModifier] = 3.0
    • Adjust [maxTemp] from 1900 to 2000
• [LETladderF2m.cfg]
  • Radial (fixed) ladder
  • Add
    • [emissiveConstant] = 0.08
    • Add [thermalMassModifier] = 3.0
    • Adjust [maxTemp] from 1900 to 2000
• [LETladderF3m.cfg]
  • Radial (fixed) ladder
  • Add
    • [emissiveConstant] = 0.08
    • Add [thermalMassModifier] = 3.0
    • Adjust [maxTemp] from 1900 to 2000
• [LETbay2mOct1.cfg]
  • Service Bay
    • Add [emissiveConstant] = 0.04
    • Add [thermalMassModifier] = 5.0
    • Adjust [maxTemp] from 2600 to 2900
    • Add
      • [ModuleConductionMultiplier]
      • [modifiedConductionFactor] = 0.001
      • [convectionFluxThreshold]= 500
• [LETbay2mOct2.cfg]
  • Service Bay
    • Add [emissiveConstant] = 0.04
    • Add [thermalMassModifier] = 5.0
    • Adjust [maxTemp] from 2600 to 2900
    • Add
      • [ModuleConductionMultiplier]
      • [modifiedConductionFactor] = 0.001
      • [convectionFluxThreshold]= 500
• [LETbay2mExp.cfg]
  • Service Bay (Rover Garage)
    • Add [emissiveConstant] = 0.04
    • Add [thermalMassModifier] = 5.0
    • Adjust [maxTemp] from 2600 to 2900
    • Add
      • [ModuleConductionMultiplier]
      • [modifiedConductionFactor] = 0.001
      • [convectionFluxThreshold]= 500
• [LETladderF1m.cfg]
  • Radial Ladder
    • [maxTemp] increased to 1900 from 1800
    • Add [emissiveConstant] = 0.8
    • Add [thermalMassModifier] = 3
• [LETladderF2m.cfg]
  • Radial Ladder
    • [maxTemp] increased to 2000 from 1900
    • Add [emissiveConstant] = 0.8
    • Add [thermalMassModifier] = 3
• [LETladderF3m.cfg]
  • Radial Ladder
    • [maxTemp] increased to 2000 from 1900
    • Add [emissiveConstant] = 0.8
    • Add [thermalMassModifier] = 3
• [LETladderD5m.cfg]
  • Retractable Ladder
    • Add [emissiveConstant] = 0.8
    • Add [thermalMassModifier] = 3
• [LETladderD8m.cfg]
  • Retractable Ladder
    • Add [emissiveConstant] = 0.8
    • Add [thermalMassModifier] = 3
• closes #65
• closes #66
• closes #67
• closes #68
• closes #69
• closes #70
• closes #71
• closes #72
• closes #73
• closes #74
• closes #75
• closes #76
• closes #77
• closes #78
• closes #79

Part Localization

• create agency
• create /Localization/ folder
  • create [en-us.cfg]
  • create [quickstart.md]
  • create [readme.md]
• Localized parts:
  • [LETladderF1m.cfg]
  • [LETladderF2m.cfg]
  • [LETladderF3m.cfg]
  • [LETladderD8m.cfg]
  • [LETladderD5m.cfg]
  • [LETchuteR1.cfg]
  • [LETchute2m.cfg]
  • [LETchute1m.cfg]
  • [LETbay2mOct2.cfg]
  • [LETbay2mOct1.cfg]
  • [LETbay2mExp.cfg]
  • [LETpod2m4k.cfg]
  • [LETlander2mX3.cfg]
  • [LETleg2.cfg]
  • [LETleg1.cfg]
• closes #80 - Part Localization
• closes #24 - Localization - English (United States) <en-us.cfg>
• updates #6 - Adoption Documentation
• updates #23 - Localization - Master
• updates #65 #66, #67 #68 #69 #70 #71 #72 #73 #74 #75 #76 #77 #78 #79
• updates #86 - Agent update

Update texture pointers

• .mbm | .tga | .png -->.dds
• updates #65 #66, #67 #68 #69 #70 #71 #72 #73 #74 #75 #76 #77 #78 #79

Relocated art assets

• move textures and models into Assets/
• update MODEL paths in part configs
• updates #65 #66, #67 #68 #69 #70 #71 #72 #73 #74 #75 #76 #77 #78 #79

Part Thumbnail Images

• thumbnail images list
  • [LETladderF2m.cfg]
  • [LETladderF1m.cfg]
  • [LETladderD8m.cfg]
  • [LETladderD5m.cfg]
  • [LETchuteR1.cfg]
  • [LETchute2m.cfg]
  • [LETchute1m.cfg]
  • [LETbay2mOct2.cfg]
  • [LETbay2mOct1.cfg]
  • [LETbay2mExp.cfg]
  • [LETpod2m4k.cfg]
  • [LETlander2mX3.cfg]
  • [LETleg2.cfg]
  • [LETleg1.cfg]
  • [LETladderF3m.cfg]
• create [docs/PartThumbnails.md]
• closes #81 - Part Thumbnail Images

Parts Missing Manufacturer

• [LETleg2.cfg]
• [LETchute1m.cfg]
• [LETbay2mOct2.cfg]
• [LETbay2mOct1.cfg]
• [LETbay2mExp.cfg]
  • closes #82 - Parts Missing Manufacturer

Status

• closes #8 - Release 0.5.0.0-adoption
• closes #7 - Adoption - social media
• closes #6 - Adoption Documentation
• closes #5 - Adoption Legal MumboJumbo
• closes #4 - Adoption - GitHub
• closes #64 - Update Lithobrake Exploration Technologies (LET)

---

See More

• Changelog Summary for more details of changes : See ChangeLog
• Discussions and news on this mod: See Discussions or KSP Forums
• Known Issues for more details of feature requests and known issues : See Known Issues

Localization

• English
• your translation here

HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome!

---

How to support this and other great mods by zer0Kerbal

---

*red box below is a link to forum post on how to get support*

Be Kind: Lithobrake, not jakebrake! Keep your Module Manager up to date

---

---

This document: CC BY-NC-ND 3.0 Unported by zer0Kerbal

What's Changed

• Create CC-BY-NC-SA-4.0.txt by @zer0Kerbal in #63
• Part Thumbnail Images by @zer0Kerbal in #83

• Relocated art assets by @zer0Kerbal in #84

• Update texture pointers by @zer0Kerbal in #85
• Part Localization by @zer0Kerbal in #88
• upstream (update branch with master branch commits) by @zer0Kerbal in #89
• [ImgBot] Optimize images by @imgbot in #93
• Version 0.5.0.0 - Adoption - Land Boldly and Safely Return by @zer0Kerbal in #97

New Contributors

• @imgbot made their first contribution in #93

Full Changelog: 0.4.0.0...0.5.0.0