Skip to content

PCB Design

HomeKid edited this page May 5, 2020 · 10 revisions

Tools

Since these projects are involve some soldering I highly recommend to buy a soldering iron before starting assemble it! Personally I'm using a 10$ one from Aliexpress, but since I have to solder SMD parts for the PCBs I've ordered a Soldering station like in the picture 😄 Soldering Iron
Soldering Station 1
Soldering Station 2
Hot Air Soldering Gun

PCB Design

I've designed a simple PCB for ESP8266 boards.
The board dimensions are 45mm x 18mm, and compatible with ESP-12E/F and ESP-07S boards.

The PCB has an USB connection for powering the module and/or one 5V/GND input!

❗️❗️❗️Order PCBs from PCBWay and You will get 5$ DISCOUNT using this link! ❗️❗️❗️

Download PCB files from here!

Parts needed for PCB

Hot Air Soldering Gun

ESP12F/E
SMD 0805 resistors
SMD 0805 capacitors
AMS1117-3.3
4.5x4.5 button
2.54mm header
SS14
USB connector
5.08 Screw terminal
Door Sensor NC

Prefix Value Package
R1 10K Ω SMD 0805
R2 10K Ω SMD 0805
R3 10K Ω SMD 0805
C1 100nF SMD 0805
C2 10uF SMD 0805
C3 10uF SMD 0805
C4 100nF SMD 0805
D1 SS14 SOD-123F
U1 AMS1117-3.3 SOT223
Reset Tactile Button 4.5x4.5x6mm 90 degree
Serial 2.54mm 4P header (optional)
Input 2 pin screw terminal 5.08mm
USB USB female connector microUSB-5P-5.9-M

❗️❗️❗️Order PCBs from PCBWay and You will get 5$ DISCOUNT using this link! ❗️❗️❗️


paypal

Clone this wiki locally