ArduinoRubberduckyPayload

Run Rubberducky payloads on an Arduino.

Usage

1. Install the Arduino library by going to Sketch>Include Library>Add .ZIP Library in the Arduino IDE and selecting the RubberduckyPayload folder.
2. Convert an encoded Rubberducky payload to an Arduino array: $ ./bin2array.py BIN_FILE [CHUNK_SIZE]
3. In the Arduino IDE, open File>Examples>RubberduckyPayload>template and paste the output of bin2array.py at the marked spot.

Example output of bin2array.py

const unsigned int duckraw_size = 22;
const PROGMEM uint8_t duckraw [duckraw_size] = {
  0xb, 0x2, 0x8, 0x0, 0xf, 0x0, 0xf, 0x0, 0x12, 0x0, 0x2c, 0x0, 0x1a, 0x2, 0x12, 0x0, 0x15, 0x0, 0xf, 0x0,
  0x7, 0x0
};

Template sketch

#include "RubberduckyPayload.h"

// Paste the output of the Python script here.

void setup() {
  delay(1000); // 1 second delay in order to give the computer time to recognise the Arduino.
  RubberduckyPayload.execute(duckraw_size, duckraw); // Execute the payload.
}

void loop() {} // As the payload should only be executed once, void loop stays empty

Credits

This project was inspired by duck2spark by MaMe82 (Marcus Mengs).

The RubberduckyPayload Arduino library uses code from the Arduino Keyboard library.