Skip to content

A tool used for calibrate the extrinsic between 2D laser range finder (LRF) and camera. ROS Version: https://github.com/TurtleZhong/camera_lidar_calibration_v2

Notifications You must be signed in to change notification settings

TurtleZhong/camera_lidar_calibration

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Camera Lidar Calibration Tool.

building star

Author:xinliangzhong([email protected])

demo0

demo

1.Description

The package is used to calibrate a 2D LiDAR or laser range finder (LRF) with a monocular camera. Specficially, Hokuyo UTM-30LX have been suscessfully calibrated against a mono camera.

But this approach is really a naive way, in a word, it just 3D-2D optimization problem. So we decide to develop the new approach to calibrate the extrinsic

2.Prerequisites

We have tested the library in 16.04, but it should be easy to compile in other platforms.

OpenCV

We use OpenCV to manipulate images and features. Dowload and install instructions can be found at: http://opencv.org. Required at leat 2.4.3. Tested with OpenCV 3.3.

Eigen3

Download and install instructions can be found at: http://eigen.tuxfamily.org. Required at least 3.1.0.

Ceres

Download and install instructions can be found at: http://www.ceres-solver.org/installation.html.

3.How to build

mkdir build
cd build
cmake ..
make

4.How to Prepare the calibration data

We need the 3d points in laser coordination and the same points in the image. The 3D points (actually z=0) you can put in the data/laser_points.txt; The 2D points in the image you can put in the data/image_points.txt; We combine the data in data.txt with 4 cols which represents x y u v respectively.

So how to fine the 3D-2D pairs correctly? Here we provide a simple way: Suppose your laser in the horizontal plane, and we just need to measure the height of the laser. Actually the red point in the following picture is the flag that we tested in our setups. flag

For the x and y, you can use the rviz (2D nav goal) tool to measure. The result will be show in the terminal. For the u and v in the image, we provide a simple tool to detect corners in the rectangle your mouse selected. and the data will automatically saved in data/image_points.txt. corner_detect

5.Key Algorithm

Actually it just a least square problem.

6.Show the reprojection results

Tcl: which takes a vector from laser to camera.

reprojection

reprojection

7.Good luck to you!

About

A tool used for calibrate the extrinsic between 2D laser range finder (LRF) and camera. ROS Version: https://github.com/TurtleZhong/camera_lidar_calibration_v2

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published