hit formatting of interfacekernels input files

Refs idaholab#128

test/tests/interfacekernels/thermal_conductance/thermal_interface.i

@@ -5,112 +5,112 @@
 []
 
 [Variables]
-  [./temperature_graphite]
+  [temperature_graphite]
     initial_condition = 300.0
     block = graphite
-  [../]
-  [./temperature_stainless_steel]
+  []
+  [temperature_stainless_steel]
     initial_condition = 300.0
     block = stainless_steel
-  [../]
-  [./potential_graphite]
+  []
+  [potential_graphite]
     block = graphite
-  [../]
-  [./potential_stainless_steel]
+  []
+  [potential_stainless_steel]
     block = stainless_steel
-  [../]
+  []
 []
 
 [AuxVariables]
-  [./T_infinity]
+  [T_infinity]
     initial_condition = 300.0
-  [../]
+  []
 []
 
 [Kernels]
-  [./HeatDiff_graphite]
+  [HeatDiff_graphite]
     type = ADHeatConduction
     variable = temperature_graphite
     block = graphite
-  [../]
-  [./HeatTdot_graphite]
+  []
+  [HeatTdot_graphite]
     type = ADHeatConductionTimeDerivative
     variable = temperature_graphite
     block = graphite
-  [../]
-  [./HeatSource_graphite]
+  []
+  [HeatSource_graphite]
     type = ADJouleHeatingSource
     variable = temperature_graphite
     elec = potential_graphite
     electrical_conductivity = electrical_conductivity
     block = graphite
-  [../]
+  []
 
-  [./HeatDiff_stainless_steel]
+  [HeatDiff_stainless_steel]
     type = ADHeatConduction
     variable = temperature_stainless_steel
     block = stainless_steel
-  [../]
-  [./HeatTdot_stainless_steel]
+  []
+  [HeatTdot_stainless_steel]
     type = ADHeatConductionTimeDerivative
     variable = temperature_stainless_steel
     block = stainless_steel
-  [../]
-  [./HeatSource_stainless_steel]
+  []
+  [HeatSource_stainless_steel]
     type = ADJouleHeatingSource
     variable = temperature_stainless_steel
     elec = potential_stainless_steel
     electrical_conductivity = electrical_conductivity
     block = stainless_steel
-  [../]
+  []
 
-  [./electric_graphite]
+  [electric_graphite]
     type = ADMatDiffusion
     variable = potential_graphite
     diffusivity = electrical_conductivity
     block = graphite
-  [../]
-  [./electric_stainless_steel]
+  []
+  [electric_stainless_steel]
     type = ADMatDiffusion
     variable = potential_stainless_steel
     diffusivity = electrical_conductivity
     block = stainless_steel
-  [../]
+  []
 []
 
 [BCs]
-  [./external_surface_stainless]
+  [external_surface_stainless]
     type = ADCoupledSimpleRadiativeHeatFluxBC
     boundary = right_stainless_steel
     variable = temperature_stainless_steel
     T_infinity = T_infinity
     emissivity = 0.85
-  [../]
-  [./external_surface_graphite]
+  []
+  [external_surface_graphite]
     type = ADCoupledSimpleRadiativeHeatFluxBC
     boundary = right_graphite
     variable = temperature_graphite
     T_infinity = T_infinity
     emissivity = 0.85
-  [../]
-  [./elec_top]
+  []
+  [elec_top]
     type = ADDirichletBC
     variable = potential_stainless_steel
     boundary = top_die
-    value = 0.68  # Better reflects Cincotti et al (DOI: 10.1002/aic.11102) Figure 19
-  [../]
-  [./elec_bottom]
+    value = 0.68 # Better reflects Cincotti et al (DOI: 10.1002/aic.11102) Figure 19
+  []
+  [elec_bottom]
     type = ADDirichletBC
     variable = potential_stainless_steel
     boundary = bottom_die
     value = 0
-  [../]
+  []
 []
 
 [InterfaceKernels]
   active = 'thermal_contact_conductance electric_contact_conductance'
 
-  [./thermal_contact_conductance]
+  [thermal_contact_conductance]
     type = ThermalContactCondition
     variable = temperature_stainless_steel
     neighbor_var = temperature_graphite
@@ -123,18 +123,18 @@
     user_electrical_contact_conductance = 2.5e5 # as described in Cincotti et al (DOI: 10.1002/aic.11102)
     user_thermal_contact_conductance = 7 # also from Cincotti et al
     boundary = ssg_interface
-  [../]
-  [./electric_contact_conductance]
+  []
+  [electric_contact_conductance]
     type = ElectrostaticContactCondition
     variable = potential_stainless_steel
     neighbor_var = potential_graphite
     primary_conductivity = electrical_conductivity
     secondary_conductivity = electrical_conductivity
     boundary = ssg_interface
     user_electrical_contact_conductance = 2.5e5 # as described in Cincotti et al (DOI: 10.1002/aic.11102)
-  [../]
+  []
 
-  [./thermal_contact_conductance_calculated]
+  [thermal_contact_conductance_calculated]
     type = ThermalContactCondition
     variable = temperature_stainless_steel
     neighbor_var = temperature_graphite
@@ -147,67 +147,67 @@
     mean_hardness = graphite_stainless_mean_hardness
     mechanical_pressure = 8.52842e10 # resulting in electrical contact conductance = ~1.4715e5, thermal contact conductance = ~3.44689e7
     boundary = ssg_interface
-  [../]
+  []
 []
 
 [Materials]
   active = 'heat_conductor_graphite rho_graphite sigma_graphite heat_conductor_stainless_steel rho_stainless_steel sigma_stainless_steel'
 
   #graphite
-  [./heat_conductor_graphite]
+  [heat_conductor_graphite]
     type = ADHeatConductionMaterial
     thermal_conductivity = 630
     specific_heat = 60
     block = graphite
-  [../]
-  [./rho_graphite]
+  []
+  [rho_graphite]
     type = ADGenericConstantMaterial
     prop_names = 'density'
     prop_values = 1.75e3
     block = graphite
-  [../]
-  [./sigma_graphite]
+  []
+  [sigma_graphite]
     type = ADElectricalConductivity
     temperature = temperature_graphite
     reference_temperature = 293.0
     reference_resistivity = 3.0e-3
     temperature_coefficient = 0 # makes conductivity constant
     block = graphite
-  [../]
+  []
 
   #stainless_steel
-  [./heat_conductor_stainless_steel]
+  [heat_conductor_stainless_steel]
     type = ADHeatConductionMaterial
     thermal_conductivity = 17
     specific_heat = 502
     block = stainless_steel
-  [../]
-  [./rho_stainless_steel]
+  []
+  [rho_stainless_steel]
     type = ADGenericConstantMaterial
     prop_names = 'density'
     prop_values = 8e3
     block = stainless_steel
-  [../]
-  [./sigma_stainless_steel]
+  []
+  [sigma_stainless_steel]
     type = ADElectricalConductivity
     temperature = temperature_stainless_steel
     reference_temperature = 293.0
     reference_resistivity = 7e-7
     temperature_coefficient = 0 # makes conductivity constant
     block = stainless_steel
-  [../]
+  []
 
   # harmonic mean of graphite and stainless steel hardness
-  [./mean_hardness]
+  [mean_hardness]
     type = GraphiteStainlessMeanHardness
-  [../]
+  []
 []
 
 [Preconditioning]
-  [./SMP]
+  [SMP]
     type = SMP
     full = true
-  [../]
+  []
 []
 
 [Executioner]