Skip to content

Sample code for reading audio samples from the ESP32 ADC using I2S

License

Notifications You must be signed in to change notification settings

atomic14/esp32_audio

Repository files navigation

This code is now pretty old

It's probably still useful, but I would recomment people check out the fantastic work here: https://github.com/pschatzmann/arduino-audio-tools

ESP32 I2S Audio

Explanatory video of the analog mic boards here (MAX9814 and MAX4466) here

Demo Video

And for the two I2S boards (SPH0645 and INMP441) here

Demo Video

For audio output we can use the MAX98357A boards - there's a explanatory video here

Demo Video

This project demonstrates how to use the ESP32 built-in Analog to Digital Converters and I2S for capturing audio data and for audio output..

There are four projects in this repository: loop_sampling, i2s_sampling, i2s_output and server.

server

This is a simple node server that writes the samples received from the ESP32 to a file.

Check the README.md file in the server folder for detailed instructsions.

You will need to have node and yarn. You may already have these on your system.

Check with:

node --version
yarn --version

Then just run:

cd server
yarn

To install the dependencies. And

cd server
yarn start

When you want to run the server.

loop_sampling

This project shows how to use the Arduino analogRead function and the Espressif adc1_get_raw function.

It also demonstrates how to get a calibrated value back from the ADC to give you the actual voltage at the input.

i2s_sampling

This project handles both analogue devices (such as the MAX4466 and the MAX9814) and I2S devices (such as the SPH0645 and INMP441).

This project demonstrates how to use the I2S peripheral for high-speed sampling using DMA to transfer samples directly to RAM.

We can read these samples from the internal ADC or from the I2S peripheral directly.

Samples are read from the DMA buffers and sent to a server running on your laptop/desktop machine.

The current set of pin assignment in the code are:

ADC

Function GPIO Pin Notes
Analogue input GPIO35 ADC_UNIT_1, ADC1_CHANNEL_7

I2S

Function GPIO Pin Notes
bck_io_num GPIO_NUM_32 I2S - Serial clock
ws_io_num GPIO_NUM_25 I2S - LRCLK - left right clock
data_in_num GPIO_NUM_33 I2S - Serial data

i2s_output

This example shows how to drive an I2S output device - I've tested this against the MAX98357 breakout board from Adafruit - https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp

There is an example WAV file that can be played or you can play a simple sin wave through the output.

To play the WAV file you will need to download the file to the SPIFFS file system.

This is now annoyingly hard to find on platform.io - watch this video to see how to find it.

FS Upload

The pins currently configured are:

Function GPIO Pin Notes
bck_io_num GPIO_NUM_27 I2S - Serial clock
ws_io_num GPIO_NUM_14 I2S - LRCLK - left right clock
data_out_num GPIO_NUM_26 I2S - Serial data

About

Sample code for reading audio samples from the ESP32 ADC using I2S

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published