Stereo

BoomBeastic Stereo build guide

Parts list

here you can find the list

Assembly

Front panel

• use 4 M3 screws and nuts for each speaker
• cut 2 pair of common bi-polar electric wire and solder a pair to each speaker
• press-fit the LED matrix in place, it should be tight enough to hold it without glue
• fit the other extremity of the pair of speaker cables to the ADAFRUIT I2S 3W STEREO SPEAKER BONNET
• wire the VCC (5V), GND, SDA and SDL pins from the LED Matrix to the corresponding labeled pins on the ADAFRUIT I2S 3W STEREO SPEAKER BONNET

Back panel

• secure the Raspberry Pi 3 Model B using 4 short wood screws (or some hot glue, really)
• attach the ADAFRUIT I2S 3W STEREO SPEAKER BONNET to the Raspberry Pi
• make the power cable pass through the hole and attach it to the Raspberry Pi
• place 6 M3 nuts in the slots

Attaching the 2 parts together

Just attach the 2 pieces and use 6 M3 screws (10 to 15 mm long) to secure the assembly