Update 24 packages

[Bisaloo]

🤖 This is an automated build

This will update 24 packages in your lesson with the following versions:

# NEW OR REMOVED PACKAGES -------------------------------
- codetools  [required by globals]
- lattice    [required by Matrix]
- mgcv       [required by ggplot2]
- codetools   [0.2-19 -> *]
- lattice     [0.22-5 -> *]
- mgcv        [1.9-1 -> *]
- nlme        [3.1-164 -> *]

# CRAN -----------------------------------------------------------------------
- callr            [3.7.3 -> 3.7.5]
- data.table       [1.15.0 -> 1.15.2]
- DBI              [1.2.1 -> 1.2.2]
- distributional   [0.3.2 -> 0.4.0]
- ggplot2          [3.4.4 -> 3.5.0]
- grates           [1.1.0 -> 1.1.1]
- igraph           [2.0.1.1 -> 2.0.2]
- loo              [2.6.0 -> 2.7.0]
- parallelly       [1.36.0 -> 1.37.1]
- RcppEigen        [0.3.3.9.4 -> 0.3.4.0.0]
- runner           [0.4.3 -> 0.4.4]
- rvest            [1.0.3 -> 1.0.4]
- StanHeaders      [2.32.5 -> 2.32.6]
- xfun             [0.41 -> 0.42]
- abind            [* -> 1.4-5]
- codetools        [* -> 0.2-19]
- lattice          [* -> 0.22-5]
- mgcv             [* -> 1.9-1]
- posterior        [* -> 1.5.0]
- tensorA          [* -> 0.36.2.1]

# GitHub ---------------------------------------------------------------------
- epidemics        [epiverse-trace/epidemics@main: f7e33b59 -> d0ecfa25]
- epiparameter     [epiverse-trace/epiparameter@HEAD: 7c5a0fb9 -> e4698df8]

# RSPM -----------------------------------------------------------------------
- nlme             [* -> 3.1-164]

# carpentries ----------------------------------------------------------------
- curl             [repo: CRAN -> carpentries; ver: 5.2.0 -> 5.2.1]

⏱️ In a few minutes, a comment will appear that will show you how the output has changed based on these updates.

If you want to inspect these changes locally, you can use the following code to check out a new branch:

git fetch origin update/packages
git checkout update/packages

• Auto-generated by create-pull-request on 2024-03-05

[github-actions]

Thank you!

Thank you for your pull request 😃

🤖 This automated message can help you check the rendered files in your submission for clarity. If you have any questions, please feel free to open an issue in {sandpaper}.

If you have files that automatically render output (e.g. R Markdown), then you should check for the following:

• 🎯 correct output
• 🖼️ correct figures
• ❓ new warnings
• ‼️ new errors

Rendered Changes

🔍 Inspect the changes: https://github.com/epiverse-trace/tutorials/compare/md-outputs..md-outputs-PR-138

The following changes were observed in the rendered markdown documents:

 compare-interventions.md                           |   28 +-
 config.yaml (gone)                                 |   87 -
 create-forecast.md                                 |  159 +-
 ...create-forecast-rendered-unnamed-chunk-11-1.png |  Bin 8391 -> 5562 bytes
 fig/create-forecast-rendered-unnamed-chunk-3-1.png |  Bin 50692 -> 47174 bytes
 fig/create-forecast-rendered-unnamed-chunk-9-1.png |  Bin 10361 -> 9750 bytes
 fig/introduction-rendered-unnamed-chunk-5-1.png    |  Bin 51020 -> 49650 bytes
 ...l-choices-rendered-unnamed-chunk-3-1.png (gone) |  Bin 17679 -> 0 bytes
 ...l-choices-rendered-unnamed-chunk-4-1.png (gone) |  Bin 9086 -> 0 bytes
 ...ng-interventions-rendered-baseline-1.png (gone) |  Bin 33760 -> 0 bytes
 ...-interventions-rendered-plot_masks-1.png (gone) |  Bin 34141 -> 0 bytes
 ...erventions-rendered-plot_vaccinate-1.png (gone) |  Bin 39125 -> 0 bytes
 ...ransmissibility-rendered-unnamed-chunk-15-1.png |  Bin 31619 -> 28974 bytes
 ...ransmissibility-rendered-unnamed-chunk-16-1.png |  Bin 30961 -> 28932 bytes
 ...ransmissibility-rendered-unnamed-chunk-19-1.png |  Bin 83762 -> 40895 bytes
 fig/read-delays-rendered-unnamed-chunk-20-1.png    |  Bin 11595 -> 9568 bytes
 ...ulating-transmission-rendered-plot-1.png (gone) |  Bin 18060 -> 0 bytes
 ...ulating-transmission-rendered-traj-1.png (gone) |  Bin 51739 -> 0 bytes
 ...ng-transmission-rendered-visualise-1.png (gone) |  Bin 51739 -> 0 bytes
 introduction.md                                    |   47 +-
 md5sum.txt                                         |   36 +-
 model-choices.md                                   |   32 +-
 modelling-interventions.md                         |  111 +-
 quantify-transmissibility.md                       |  262 ++-
 read-delays.md                                     |  265 ++-
 renv.lock (gone)                                   | 2280 --------------------
 simulating-transmission.md                         |   72 +-
 27 files changed, 662 insertions(+), 2717 deletions(-)

What does this mean?

If you have source files that require output and figures to be generated (e.g. R Markdown), then it is important to make sure the generated figures and output are reproducible.

This output provides a way for you to inspect the output in a diff-friendly manner so that it's easy to see the changes that occur due to new software versions or randomisation.

⏱️ Updated at 2024-07-02 02:33:10 +0000