This is a Home Assistant JVC Custom Component implementing my JVC library
Someone else made an official integration after this one, so this will remain a custom component. Unfortunately, the official integration is missing a lot of features.
All the features in my JVC library including:
- Power
- Picture Modes
- Laser power and dimming
- Pretty much every JVC command
- HA Attributes for current settings like power state, picture mode, laser mode, input, etc
- and so on
Note: JVC projectors currently only support a single network connection at a time. If you're running other control systems or attempt to run the JVC AutoCal software, keep in mind you can only have one control system connected at a time.
This is a custom component.
Install HACS, then install the component by adding this as a custom repo https://hacs.xyz/docs/faq/custom_repositories
You can also just copy all the files into your custom_components folder but then you won't get automatic updates.
# configuration.yaml
remote:
- platform: jvc_projectors
name: { entity name }
password: { password } (optional for non-NZ)
host: { IP addr }
new_model: false | true (true if you have NZ800/900 or newer)The new_model flag is now required because JVC made a breaking change to how the password is encoded. Because I can't know the model before connecting, you have to tell the library to handle the password differently.
You can use the remote entity attributes in sensors, automations, etc.
replace nz7 with the name of your remote entity
sensor:
platform: template
sensors:
jvc_installation_mode:
value_template: >
{% if is_state('remote.nz7', 'on') %}
{{ states.remote.nz7.attributes.installation_mode }}
{% else %}
Off
{% endif %}Use the remote.send_command service to send commands to the projector.
$command,$parameter
example: "anamorphic,off"
example: "anamorphic,d"
example: "laser_dim,auto3"
It also supports using remote codes as ASCII found here (Code A only)
example: "remote,2E"
Currently Supported Commands:
anamorphic
aperture
aspect_ratio
color_mode
content_type
content_type_trans
enhance
eshift_mode
get_model
get_software_version
graphic_mode
hdr_data
hdr_level
hdr_processing
input_level
input_mode
installation_mode
lamp_power
lamp_time
laser_mode
laser_power
laser_value (0-100)
low_latency
mask
menu
motion_enhance
picture_mode
power
remote
signal_3d
source_status
theater_optimizer
Currently Supported Parameters:
AnamorphicModes
off
a
b
c
d
ApertureModes
off
auto1
auto2
AspectRatioModes
zoom
auto
native
ColorSpaceModes
auto
YCbCr444
YCbCr422
RGB
ContentTypeTrans
sdr
hdr10_plus
hdr10
hlg
ContentTypes
auto
sdr
hdr10_plus
hdr10
hlg
EnhanceModes
zero
one
two
three
four
five
six
seven
eight
nine
ten
EshiftModes
off
on
GraphicModeModes
standard
hires1
hires2
HdrData
sdr
hdr
smpte
hybridlog
hdr10_plus
none
HdrLevel
auto
min2
min1
zero
plus1
plus2
HdrProcessing
hdr10_plus
static
frame_by_frame
scene_by_scene
InputLevel
standard
enhanced
superwhite
auto
InputModes
hdmi1
hdmi2
InstallationModes
mode1
mode2
mode3
mode4
mode5
mode6
mode7
mode8
mode9
mode10
LampPowerModes
normal
high
LaserModes
off
auto1
auto2
auto3
LaserPowerModes
low
med
high
LowLatencyModes
off
on
MaskModes
on
off
MenuModes
menu
lens_control
up
down
back
left
right
ok
MotionEnhanceModes
off
low
high
PictureModes
film
cinema
natural
hdr
thx
frame_adapt_hdr
user1
user2
user3
user4
user5
user6
hlg
hdr_plus
pana_pq
filmmaker
frame_adapt_hdr2
frame_adapt_hdr3
PowerModes
off
on
PowerStates
standby
on
cooling
reserved
emergency
SourceStatuses
logo
no_signal
signal
TheaterOptimizer
off
on
ThreeD
auto
sbs
ou
2d