P1 Reader for Dutch PowerMeters
- Supports a live (debug) view to test your connection
- InfluxDB output for saving P1 data every 10 seconds
Please use the github issue's feature to request help with any issues
Usage: [options] [command]
Options:
-? | -h | --help Show help information
Commands:
debug Show debug information
influxdb Write to influxdb
Use " [command] --help" for more information about a command.
Usage: debug [options]
Options:
-? | -h | --help Show help information
--port Serial port to read from (Example: "/dev/ttyUSB0")
--baudrate Baudrate to read serial port with (Example: 115200 or 9600)
--stopbits Stopbits to read serial port with (Example: 1)
--databits Databits to read serial port with (Example: 7 or 8)
--parity Databits to read serial port with (Example: 1 (Even) or 0 (None))
Usage: influxdb [options]
Options:
-? | -h | --help Show help information
--logging Log level to display (0 = Verbose, 1 = Debug, 2 = Information, 3 = Warning, 4 = Error, 5 = Fatal)
--port Serial port to read from (Example: "/dev/ttyUSB0")
--baudrate Baudrate to read serial port with (Example: 115200 or 9600)
--stopbits Stopbits to read serial port with (Example: 1)
--databits Databits to read serial port with (Example: 7 or 8)
--parity Databits to read serial port with (Example: 1 (Even) or 0 (None))
--influxhost InfluxDB server host
--influxdatabase InfluxDB database name
--influxusername InfluxDB database username
--influxpassword InfluxDB database password
Use the included publish profile to publish to a folder. Make sure to copy over the contents from the linux-arm folder.
On the raspberry run the following command
sudo nano /etc/rc.local
Add a new line with the application to run in the background (&). Example:
/home/pi/linux-arm/P1ReaderApp influxdb --port /dev/ttyUSB0 --baudrate 115200 --stopbits 1 --databits 7 --parity 1 --influxhost http://<ip>:<port> --influxdatabase p1 --influxusername <username> --influxpassword <password> &