xilinx_config_zynq

= SD card boot image =

Platform: Application:

1. Copy the contents of this directory to an SD card
2. Set boot mode to SD
   • Jumper J1 non connected
   • Jumper J2 connected
3. Insert SD card and turn board on

The DONE LED (red led) should be on: meaning the FPGA (PL) has been configured properly using the bitstream

Those scripts generates a complete system for a Myir board. The system contains:

• Linux Kernel
• Config of the FPGA (bitstream)

Please download: https://www.dropbox.com/s/0zn56diit0mqh2c/xilinx_source.tar.gz

and put it to the begining of the folder hierarchy.

#Run ./create_hierarchy.sh

• Creates all the folders

• Download (if not already) the "xilinx_source.tar.gz" archive

• Uncompress and send the source to the proper folders

• Make all the script executable (chmod)

  ./

  • build
    • make_bootbin.sh
  • clean_files.sh
  • copy_to_sd_card.sh
  • create_hierachy.sh
  • dev
    • applications
    • make_dtb.sh
    • make_fsbl.sh
    • projects
  • linux
    • linux-xlnx
    • linux-xlnx.tar.bz2
    • make_kernel.sh
    • make_uboot.sh
    • u-boot-xlnx
    • u-boot-xlnx.tar.bz2
  • make_all.sh
  • part_sd_card.sh
  • preset
    • zynq_preset.tcl
  • README.md
  • sd_write_image.sh
  • setup_env.sh
  • tools
    • CodeSourcery
    • Sourcery_CodeBench_Lite_for_Xilinx_GNU_Linux.tar.bz2
  • xilinx_source
    • filesystem
    • linux
    • tools
  • xilinx_source.tar.gz

#Source ./setup_env.sh To have all the necessary commands/variables

#./part_sd_card.sh <1 or 0> This script will create the partitions needed to run linux on the SD card You need to specify the path of the SD card: /dev/sdc

• This script will create a partition vfat32 (named boot) and a partition ext4 (named rootfs)
• If the second argument is 1, it calls ./sd_write_image.sh

#./sd_write_image.sh This script will copy the linux image located in ./filesystem/xillinux-1.3.img.gz to the SD card specified. All file in the SD card will be removed and the default configuration will be set

#./clean_file.sh Remove all the generated files

#./copy_to_sd_card.sh Copy all necessary files to the SD card.

#./make_all.sh

Kernel images (pick one, or use the one given in the dropbox link):

• https://github.com/Digilent/linux-Digilent-Dev
• https://github.com/Xilinx/linux-xlnx.git