chore(deps-dev): bump esbuild from 0.21.5 to 0.22.0

[dependabot]

Bumps esbuild from 0.21.5 to 0.22.0.

Release notes

Sourced from esbuild's releases.

v0.22.0

This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.21.0 or ~0.21.0. See npm's documentation about semver for more information.

• Omit packages from bundles by default when targeting node (#1874, #2830, #2846, #2915, #3145, #3294, #3323, #3582, #3809, #3815)

  This breaking change is an experiment. People are commonly confused when using esbuild to bundle code for node (i.e. for --platform=node) because some packages may not be intended for bundlers, and may use node-specific features that don't work with a bundler. Even though esbuild's "getting started" instructions say to use --packages=external to work around this problem, many people don't read the documentation and don't do this, and are then confused when it doesn't work. So arguably this is a bad default behavior for esbuild to have if people keep tripping over this.

  With this release, esbuild will now omit packages from the bundle by default when the platform is node (i.e. the previous behavior of --packages=external is now the default in this case). Note that your dependencies must now be present on the file system when your bundle is run. If you don't want this behavior, you can do --packages=bundle to allow packages to be included in the bundle (i.e. the previous default behavior). Note that --packages=bundle doesn't mean all packages are bundled, just that packages are allowed to be bundled. You can still exclude individual packages from the bundle using --external: even when --packages=bundle is present.

  The --packages= setting considers all import paths that "look like" package imports in the original source code to be package imports. Specifically import paths that don't start with a path segment of / or . or .. are considered to be package imports. The only two exceptions to this rule are subpath imports (which start with a # character) and TypeScript path remappings via paths and/or baseUrl in tsconfig.json (which are applied first).

• Drop support for older platforms (#3802)

  This release drops support for the following operating systems:

  • Windows 7
  • Windows 8
  • Windows Server 2008
  • Windows Server 2012

  This is because the Go programming language dropped support for these operating system versions in Go 1.21, and this release updates esbuild from Go 1.20 to Go 1.22.

  Note that this only affects the binary esbuild executables that are published to the esbuild npm package. It's still possible to compile esbuild's source code for these older operating systems. If you need to, you can compile esbuild for yourself using an older version of the Go compiler (before Go version 1.21). That might look something like this:

  git clone https://github.com/evanw/esbuild.git
  cd esbuild
  go build ./cmd/esbuild
  ./esbuild.exe --version
  

  In addition, this release increases the minimum required node version for esbuild's JavaScript API from node 12 to node 18. Node 18 is the oldest version of node that is still being supported (see node's release schedule for more information). This increase is because of an incompatibility between the JavaScript that the Go compiler generates for the esbuild-wasm package and versions of node before node 17.4 (specifically the crypto.getRandomValues function).

• Update await using behavior to match TypeScript

  TypeScript 5.5 subtly changes the way await using behaves. This release updates esbuild to match these changes in TypeScript. You can read more about these changes in microsoft/TypeScript#58624.

• Allow es2024 as a target environment

  The ECMAScript 2024 specification was just approved, so it has been added to esbuild as a possible compilation target. You can read more about the features that it adds here: https://2ality.com/2024/06/ecmascript-2024.html. The only addition that's relevant for esbuild is the regular expression /v flag. With --target=es2024, regular expressions that use the /v flag will now be passed through untransformed instead of being transformed into a call to new RegExp.

• Publish binaries for OpenBSD on 64-bit ARM (#3665, #3674)

  With this release, you should now be able to install the esbuild npm package in OpenBSD on 64-bit ARM, such as on an Apple device with an M1 chip.

  This was contributed by @​ikmckenz.

• Publish binaries for WASI (WebAssembly System Interface) preview 1 (#3300, #3779)

  The upcoming WASI (WebAssembly System Interface) standard is going to be a way to run WebAssembly outside of a JavaScript host environment. In this scenario you only need a .wasm file without any supporting JavaScript code. Instead of JavaScript providing the APIs for the host environment, the WASI standard specifies a "system interface" that WebAssembly code can access directly (e.g. for file system access).

... (truncated)

Changelog

Sourced from esbuild's changelog.

0.22.0

This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.21.0 or ~0.21.0. See npm's documentation about semver for more information.

• Omit packages from bundles by default when targeting node (#1874, #2830, #2846, #2915, #3145, #3294, #3323, #3582, #3809, #3815)

  This breaking change is an experiment. People are commonly confused when using esbuild to bundle code for node (i.e. for --platform=node) because some packages may not be intended for bundlers, and may use node-specific features that don't work with a bundler. Even though esbuild's "getting started" instructions say to use --packages=external to work around this problem, many people don't read the documentation and don't do this, and are then confused when it doesn't work. So arguably this is a bad default behavior for esbuild to have if people keep tripping over this.

  With this release, esbuild will now omit packages from the bundle by default when the platform is node (i.e. the previous behavior of --packages=external is now the default in this case). Note that your dependencies must now be present on the file system when your bundle is run. If you don't want this behavior, you can do --packages=bundle to allow packages to be included in the bundle (i.e. the previous default behavior). Note that --packages=bundle doesn't mean all packages are bundled, just that packages are allowed to be bundled. You can still exclude individual packages from the bundle using --external: even when --packages=bundle is present.

  The --packages= setting considers all import paths that "look like" package imports in the original source code to be package imports. Specifically import paths that don't start with a path segment of / or . or .. are considered to be package imports. The only two exceptions to this rule are subpath imports (which start with a # character) and TypeScript path remappings via paths and/or baseUrl in tsconfig.json (which are applied first).

• Drop support for older platforms (#3802)

  This release drops support for the following operating systems:

  • Windows 7
  • Windows 8
  • Windows Server 2008
  • Windows Server 2012

  This is because the Go programming language dropped support for these operating system versions in Go 1.21, and this release updates esbuild from Go 1.20 to Go 1.22.

  Note that this only affects the binary esbuild executables that are published to the esbuild npm package. It's still possible to compile esbuild's source code for these older operating systems. If you need to, you can compile esbuild for yourself using an older version of the Go compiler (before Go version 1.21). That might look something like this:

  git clone https://github.com/evanw/esbuild.git
  cd esbuild
  go build ./cmd/esbuild
  ./esbuild.exe --version
  

  In addition, this release increases the minimum required node version for esbuild's JavaScript API from node 12 to node 18. Node 18 is the oldest version of node that is still being supported (see node's release schedule for more information). This increase is because of an incompatibility between the JavaScript that the Go compiler generates for the esbuild-wasm package and versions of node before node 17.4 (specifically the crypto.getRandomValues function).

• Update await using behavior to match TypeScript

  TypeScript 5.5 subtly changes the way await using behaves. This release updates esbuild to match these changes in TypeScript. You can read more about these changes in microsoft/TypeScript#58624.

• Allow es2024 as a target environment

  The ECMAScript 2024 specification was just approved, so it has been added to esbuild as a possible compilation target. You can read more about the features that it adds here: https://2ality.com/2024/06/ecmascript-2024.html. The only addition that's relevant for esbuild is the regular expression /v flag. With --target=es2024, regular expressions that use the /v flag will now be passed through untransformed instead of being transformed into a call to new RegExp.

• Publish binaries for OpenBSD on 64-bit ARM (#3665, #3674)

  With this release, you should now be able to install the esbuild npm package in OpenBSD on 64-bit ARM, such as on an Apple device with an M1 chip.

  This was contributed by @​ikmckenz.

• Publish binaries for WASI (WebAssembly System Interface) preview 1 (#3300, #3779)

... (truncated)

Commits

• 80c6e6e publish 0.22.0 to npm
• 196dcad fix #1874: node defaults to --packages=external
• 3f57db8 release notes for #3539
• 91663db Provide API to create a custom esbuild CLI with plugins (#3539)
• e01c0e0 also mention #3665 in release notes
• 65711b3 release notes for #3674
• 63eb814 Add OpenBSD arm64 (#3674)
• b722000 fix #3300, fix #3779: add @esbuild/wasi-preview1
• 6679ec8 fix: verbose analyse output improperly trimmed (#3785)
• 94f09ea fix #3790: warn about incorrect onResolve plugin
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Looks like esbuild is up-to-date now, so this is no longer needed.