X40-Community Coolingsystem

The X40 community cooling system replaces the ailing part cooling system from Weedo. In particular, materials that require a lot of cooling are printed much better.

For more informations see: http://www.x40-community.org/index.php/the-3d-printer/weedo-x40-coolingsystem

Please make sure to use the Extrudr GreenTec Pro material when printing the hotend cover. Other materials are unsuitable and cannot take the heat!

The X40 Community Coolingsystem has the following advantages:

• Higher volume throughput due to larger fans
• Due to the stronger cooling capacity, some materials can also be printed faster
• The fan seems to be more controllable, especially at low speeds
• The air outlet opening is closer to the nozzle
• The ventilation duct is very stable and does not break off immediately if warping occurs
• The Hotend Cover can easily be dismantled e.g. to change the nozzle
• The fan can easily be exchangen
• Hotend cover can easily be printed by yourself (see cloud for instructions)
• Further improvements cannot be ruled out ;-)