hit formatting of diemodel input files

examples/sps/multiapp/diemodel/electrothermal/electrothermal_plunger_powder.i

@@ -1,6 +1,6 @@
 ## Units in the input file: m-Pa-s-K
 
-initial_temperature=300 #roughly 600C where the pyrometer kicks in
+initial_temperature = 300 #roughly 600C where the pyrometer kicks in
 
 [GlobalParams]
   order = SECOND
@@ -46,7 +46,8 @@ initial_temperature=300 #roughly 600C where the pyrometer kicks in
   [sigma_aeh]
     initial_condition = 2.0e-10 #in units eV/((nV)^2-s-nm)
   []
-  [microapp_potential] #converted to microapp electronVolts units
+  [microapp_potential]
+    #converted to microapp electronVolts units
   []
   [E_x]
     order = FIRST
@@ -143,7 +144,7 @@ initial_temperature=300 #roughly 600C where the pyrometer kicks in
     variable = heat_transfer_radiation
     boundary = 'outer_die_wall'
     coupled_variables = 'temperature'
-    constant_names = 'boltzmann epsilon temperature_farfield'  #published emissivity for graphite is 0.85
+    constant_names = 'boltzmann epsilon temperature_farfield' #published emissivity for graphite is 0.85
     constant_expressions = '5.67e-8 0.85 300.0' #roughly room temperature, which is probably too cold
     expression = '-boltzmann*epsilon*(temperature^4-temperature_farfield^4)'
   []
@@ -386,7 +387,6 @@ initial_temperature=300 #roughly 600C where the pyrometer kicks in
   []
 []
 
-
 [Materials]
   [graphite_density]
     type = ADGenericConstantMaterial
@@ -457,16 +457,16 @@ initial_temperature=300 #roughly 600C where the pyrometer kicks in
   []
   [electrical_conductivity]
     type = ADParsedMaterial
-  #   coupled_variables = 'sigma_aeh'
-  #   expression = 'sigma_aeh*1.602e8' #converts to units of J/(V^2-m-s)
+    #   coupled_variables = 'sigma_aeh'
+    #   expression = 'sigma_aeh*1.602e8' #converts to units of J/(V^2-m-s)
     property_name = 'electrical_conductivity'
     output_properties = electrical_conductivity
     outputs = 'exodus csv'
     block = powder_compact
     # type = ADDerivativeParsedMaterial
     # property_name = electrical_conductivity
     coupled_variables = 'temperature'
-    constant_names =       'Q_elec  kB            prefactor_solid  initial_porosity'
+    constant_names =       'Q_elec      kB            prefactor_solid  initial_porosity'
     constant_expressions = '1.61    8.617343e-5        1.25e-4           0.38'
     expression = '(1-initial_porosity) * prefactor_solid * exp(-Q_elec/kB/temperature) * 1.602e8' # in eV/(nV^2 s nm) per chat with Larry, last term converts to units of J/(V^2-m-s)
   []
@@ -537,13 +537,12 @@ initial_temperature=300 #roughly 600C where the pyrometer kicks in
   []
 []
 
-
 [Outputs]
   csv = true
   exodus = true
   perf_graph = true
   [ckpt]
-    type =Checkpoint
+    type = Checkpoint
     time_step_interval = 1
     num_files = 2
   []

examples/sps/multiapp/diemodel/electrothermomechs/electrothermomechanical_plunger_powder_bothends_pressurebc.i

@@ -59,7 +59,8 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
   #   order = FIRST
   #   block = 'upper_plunger lower_plunger die_wall'
   # []
-  [microapp_potential] #converted to microapp electronVolts units
+  [microapp_potential]
+    #converted to microapp electronVolts units
   []
   [E_x]
     order = FIRST
@@ -84,23 +85,25 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
 []
 
 [Physics]
-  [SolidMechanics/QuasiStatic]
-    [graphite]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'graphite_thermal_expansion'
-      block = 'upper_plunger lower_plunger die_wall'
-    []
-    [yttria]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      block = 'powder_compact'
+  [SolidMechanics]
+    [QuasiStatic]
+      [graphite]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'graphite_thermal_expansion'
+        block = 'upper_plunger lower_plunger die_wall'
+      []
+      [yttria]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        block = 'powder_compact'
+      []
     []
   []
 []

examples/sps/multiapp/diemodel/electrothermomechs/electrothermomechanical_plunger_powder_creep.i

@@ -59,7 +59,8 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
   #   order = FIRST
   #   block = 'upper_plunger lower_plunger die_wall'
   # []
-  [microapp_potential] #converted to microapp electronVolts units
+  [microapp_potential]
+    #converted to microapp electronVolts units
   []
   [E_x]
     order = FIRST
@@ -84,24 +85,26 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
 []
 
 [Physics]
-  [SolidMechanics/QuasiStatic]
-    [graphite]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'graphite_thermal_expansion'
-      block = 'upper_plunger lower_plunger die_wall'
-    []
-    [yttria]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'yttria_thermal_expansion'
-      block = 'powder_compact'
+  [SolidMechanics]
+    [QuasiStatic]
+      [graphite]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'graphite_thermal_expansion'
+        block = 'upper_plunger lower_plunger die_wall'
+      []
+      [yttria]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'yttria_thermal_expansion'
+        block = 'powder_compact'
+      []
     []
   []
 []

examples/sps/multiapp/diemodel/electrothermomechs/mechanical_plunger_powder_plastic.i

@@ -49,24 +49,26 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
 []
 
 [Physics]
-  [SolidMechanics/QuasiStatic]
-    [graphite]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'graphite_thermal_expansion'
-      block = 'upper_plunger lower_plunger die_wall'
-    []
-    [yttria]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'plastic_strain_yy strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'yttria_thermal_expansion'
-      block = 'powder_compact'
+  [SolidMechanics]
+    [QuasiStatic]
+      [graphite]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'graphite_thermal_expansion'
+        block = 'upper_plunger lower_plunger die_wall'
+      []
+      [yttria]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'plastic_strain_yy strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'yttria_thermal_expansion'
+        block = 'powder_compact'
+      []
     []
   []
 []
@@ -223,7 +225,6 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
     # relative_tolerance = 1e-20
     # absolute_tolerance = 1e-8
     # max_inelastic_increment = 0.000001
-
   []
   [yttria_thermal_expansion]
     type = ADComputeThermalExpansionEigenstrain

examples/sps/multiapp/diemodel/electrothermomechs/simple_geometries/graphite_electrothermalmech_singleblock.i

@@ -100,7 +100,8 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
   #   order = FIRST
   #   block = 'upper_plunger'
   # []
-  [microapp_potential] #converted to microapp electronVolts units
+  [microapp_potential]
+    #converted to microapp electronVolts units
   []
   [E_x]
     order = FIRST
@@ -121,15 +122,17 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
 []
 
 [Physics]
-  [SolidMechanics/QuasiStatic]
-    [graphite]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      # eigenstrain_names = 'graphite_thermal_expansion'
-      block = 'upper_plunger'
+  [SolidMechanics]
+    [QuasiStatic]
+      [graphite]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        # eigenstrain_names = 'graphite_thermal_expansion'
+        block = 'upper_plunger'
+      []
     []
   []
 []

examples/sps/multiapp/diemodel/electrothermomechs/simple_geometries/isoPlastic_singleblock.i

@@ -80,14 +80,16 @@ initial_temperature = 600 #roughly 600C where the pyrometer kicks in
 []
 
 [Physics]
-  [SolidMechanics/QuasiStatic]
-    [graphite]
-      strain = FINITE
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'plastic_strain_yy strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'thermal_expansion'
+  [SolidMechanics]
+    [QuasiStatic]
+      [graphite]
+        strain = FINITE
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'plastic_strain_yy strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'thermal_expansion'
+      []
     []
   []
 []

examples/sps/multiapp/diemodel/electrothermomechs/simple_geometries/yttria_electrothermomechanical_singleblock.i

@@ -63,7 +63,8 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
   [specific_heat_capacity_va]
     initial_condition = 842.2 # at 1500K #568.73 at 1000K #447.281 # at 293K
   []
-  [density_va] # initial condition set in ICs block below
+  [density_va]
+    # initial condition set in ICs block below
   []
   [heat_transfer_radiation]
   []
@@ -82,16 +83,17 @@ initial_temperature = 300 #roughly 600C where the pyrometer kicks in
 []
 
 [Physics]
-  [SolidMechanics/QuasiStatic]
-    [graphite]
-      strain = FINITE
-      incremental = true
-      add_variables = true
-      use_automatic_differentiation = true
-      generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy '
-                        'stress_zz plastic_strain_yy'
-      extra_vector_tags = 'ref'
-      eigenstrain_names = 'thermal_expansion'
+  [SolidMechanics]
+    [QuasiStatic]
+      [graphite]
+        strain = FINITE
+        incremental = true
+        add_variables = true
+        use_automatic_differentiation = true
+        generate_output = 'strain_xx strain_xy strain_yy strain_zz stress_xx stress_xy stress_yy stress_zz plastic_strain_yy'
+        extra_vector_tags = 'ref'
+        eigenstrain_names = 'thermal_expansion'
+      []
     []
   []
 []